Proposal: run WrongGPU's D3D12 and launcher tests on Linux under Wine with a Proton install
维护者通常 1 天内回复
还没有人认领这个 Issue。
评估
- 难度
- 4/5
- 预计耗时
- 3-5 天
- 新手友好度
- 35/100
调研方向
Start by reviewing the proposed runner in clean/linux/run_wine_tests.py and the changes it requires in clean/runtime/interop/tests/run-tests.sh; the issue says an implementation already exists on a fork. Check how it runs the four named test groups and whether the documented Proton setup and results are reproducible. Done means the runner reports PASS, FAIL, or SKIP for each test and the required interop script changes work as described.
由索引模型根据 Issue 内容生成。
描述
Why
Under Proton, WrongGPU meets a different D3D12 stack: vkd3d-proton with dxil-spirv on RADV, DXVK's DXGI, and Wine's d3dcompiler_47. #7 (Wine's shader compiler) and the AGS matrix-instruction translation (dxil-spirv PR #362) only show up there.
A small runner makes those checks repeatable on any Linux machine with an RX 9000 card and a Proton install. That includes your retest request in #7.
What I have (clean/linux/, Python with NumPy plus MinGW-w64; on my fork as test/linux-wine-runner, two commits on main)
clean/linux/run_wine_tests.py --proton <Proton folder> [--vkd3d <self-built vkd3d-proton folder>] [--runtime <wronggpu_runtime.dll>] sets up a Wine prefix the way Proton sets up a game's: vkd3d-proton, DXVK's dxgi and Wine's vkd3d libraries. It then runs four tests, each reporting PASS, FAIL or SKIP:
interop: the existingclean/runtime/interop/tests/run-tests.sh, 31 tests, compiled against Wine's ownd3dcompiler_47;rr-leak: the RR test host'stagloopjob from #11, with the 256 MiB limit of the Windows end-to-end test;ags-layout:wg_ags.hlsli's WMMA and conversion helpers on fixed register values, against a CPU reference of the gfx12 register layout (that's what dxil-spirv's translation has to preserve);launcher: the launcher's four unit-test programs, aWRONGGPU_TESTINGMinGW build run under Wine.
run-tests.sh needs two small changes: -fms-extensions for clang-based MinGW (the __try in descriptor_publish.h), and a way to pick Proton's wine over a system wine64.
Results on current main (a8500cb), RX 9070 XT, RADV, synthetic data only, with a vkd3d-proton built from vkd3d-proton 5b1089c8 plus #362's three code commits:
- All four tests pass under GE-Proton 11-11: interop 31/31, rr-leak +37 MiB, ags-layout 7/7, launcher 71/225/186/18 checks.
- interop, ags-layout and rr-leak also pass under Proton Experimental 11.0-20261105c, Proton-CachyOS 11.0-20260703, DW-Proton 11.0-15 and Proton 11.0.
- #7 retest: interop passes 31/31 on main under all five. Before #12 it was 29/31, with "Unknown modifier globallycoherent".
- #14 under Proton: your
native_probe_test(MinGW build, run under Wine) passes on the RX 9070 XT with that vkd3d-proton under all five Protons. WithWG_TEST_DRIVER_PROBE_FAIL=1it reports "probe mismatch at float 7". With Proton's stock vkd3d-proton the probe kernel fails atCreateComputePipelineState, as expected without #362.test_wmma_probe.cppalso passes with Linux clang.
Each test fails on what it targets:
- rr-leak: +2636 MiB with a runtime from before #11;
- ags-layout: fails on stock vkd3d-proton, and rejects lane-swapped and half-swapped results;
- launcher: fails when a check is broken on purpose.
Nothing in it runs on Windows or in CI.
If you'd like it in the repository, I can open a PR from that branch.
One more Linux note: tools/ci/run_python_tests.py fails 18 emulator and vector-table modules on Linux, the same on unchanged main. Most come from compiling the HIP kernels with Linux's clang, which lacks the AMD GPU builtins (__builtin_amdgcn_readfirstlane, the "+s" asm constraint). One test also writes a file called nul. That may be useful for #4.
Related: #7, #10, #14.
- 主要语言
- C++
- 星标
- 12
- 派生
- 2
- 平均合并
- 3 小时 10 分钟
- 30 天内合并 PR
- 171
环境准备
- 没有 Dockerfile 或 Docker Compose 文件
- 有 Pull Request 模板
- 阅读贡献指南
从这里开始
- 先读完整个 Issue,再读项目的贡献指南。
- 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
- Fork 仓库,在一个分支上完成修改。
- 提交 Pull Request,并在描述里引用这个 Issue 编号。
phantoslayer21/wronggpu 的其他 Issue
-
难度 2/5 1-3 小时 新手友好度 88/100
phantoslayer21/wronggpu#275 ·
维护者通常 1 天内回复
-
难度 2/5 1-3 小时 新手友好度 82/100
phantoslayer21/wronggpu#274 ·
维护者通常 1 天内回复
-
bug
难度 2/5 1-3 小时 新手友好度 88/100
phantoslayer21/wronggpu#241 ·
维护者通常 1 天内回复
-
bug build
难度 2/5 1-3 小时 新手友好度 74/100
phantoslayer21/wronggpu#234 ·
维护者通常 1 天内回复
-
bug build
难度 2/5 1-3 小时 新手友好度 80/100
phantoslayer21/wronggpu#233 ·
维护者通常 1 天内回复
查看 phantoslayer21/wronggpu 的全部 Issue
相似的 Issue
-
ai_p2
难度 2/5 1-3 小时 新手友好度 80/100
ClickHouse/ClickHouse#132519 ·
维护者通常 1 天内回复
-
难度 2/5 1-3 小时 新手友好度 76/100
juce-framework/JUCE#1810 ·
-
难度 1/5 1 小时以内 新手友好度 82/100
petercorke/robotics-toolbox-python#952 ·
维护者通常 1 天内回复
-
NatronRenderer: a Python error in the script (-t / project script) doesn't change the exit status未关闭func:engine type:bug
难度 2/5 1-3 小时 新手友好度 72/100
NatronGitHub/Natron#1276 ·
维护者通常 1 天内回复
-
难度 1/5 1-3 小时 新手友好度 77/100
维护者通常 1 天内回复