`nuxt dev`: takeover prompt loses raw mode when terminal doesn't answer OSC 11

未关闭 适合新手
#1,685 0 条评论 0 个 reaction 已指派 0 人 在 GitHub 查看

维护者通常 1 天内回复

还没有人认领这个 Issue。

评估

难度
2/5
预计耗时
1-3 小时
新手友好度
76/100
Issue 类型
缺陷
描述清晰度
描述清楚
活跃度
活跃

调研方向

从 withUserAttention 和 host.withTerminal 开始,然后将它们对 stdin 的处理与 src/boot.ts 中的 attachKeys 和 whenStdinReleased() 以及接管提示路径进行比较。在不响应 OSC 11 的终端中复现,并确认超时后提示仍保持 raw 模式。在这种情况下,方向键能够移动选项且 Enter 能提交选项,即为完成。

由索引模型根据 Issue 内容生成。

描述

Version: @nuxt/cli 4.0.3, Nuxt 4.6.4, Node 24.16, macOS

Repro
  1. Start nuxt dev in a project and leave it running.
  2. In a terminal that does not reply to OSC 11 (ESC ] 11 ; ? BEL), run nuxt dev again in the same project.
  3. The "A Nuxt dev server is already running here" select prompt appears. Press ↑/↓.

Expected: the selection moves.

Actual: ~250ms after the prompt renders, stdin drops out of raw mode. Arrow keys echo as ^[[A, and Enter arrives as \n (readline names it enter, not return), so the prompt can't be answered. Only Ctrl-C gets out.

Cause

bootDevUI (src/boot.ts) paints the panel and calls queryBackground before the dev command reaches takeOverServer. listen() in src/dev/tui/background.ts captures wasRaw = false, sets raw mode, then in finish() (on reply or on the 250ms timeout) runs if (!wasRaw) stdin.setRawMode(false). By then clack's select has taken raw mode, so the restore turns it off underneath the prompt. attachKeys already waits for whenStdinReleased(); the takeover prompt (via withUserAttention) does not.

Verified by sampling the pty's termios flags: ICANON and ECHO switch back on 0.27s after the prompt appears. With NUXT_TERM_THEME=dark (no query sent), raw mode holds.

Suggested fix

Have withUserAttention / host.withTerminal await whenStdinReleased() before running the prompt, the same way attachKeys does. Alternatively, finish() could skip the raw-mode restore if stdin's raw state changed while the query was pending.

Workaround

export NUXT_TERM_THEME=dark (or light).

主要语言
TypeScript
星标
402
派生
125
平均合并
2 天 9 小时
30 天内合并 PR
37

环境准备

在 Codespaces 中打开

在浏览器里用你自己的 GitHub 账号启动这个项目的开发容器。

  • 没有 Dockerfile 或 Docker Compose 文件
  • 没有 Pull Request 模板
  • 阅读贡献指南

从这里开始

  1. 先读完整个 Issue,再读项目的贡献指南。
  2. 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
  3. Fork 仓库,在一个分支上完成修改。
  4. 提交 Pull Request,并在描述里引用这个 Issue 编号。

nuxt/cli 的其他 Issue

查看 nuxt/cli 的全部 Issue

相似的 Issue

更多 TypeScript Issue

把新 issue 发到你的邮箱

精选适合新手参与的 GitHub issue 摘要。