Server Auth: DPoP Proof Validation (SEP-1932)

从 src/scenarios/server/ 下现有的场景注册、helpers/ 区域和 createAuthServer 开始；阅读 RFC 9449 §4.3，并运行 npm test 以了解一致性测试框架。添加一个已注册的服务器场景、proof 和 token fixtures，以及覆盖所列正向和负向检查的 helper 单元测试。当标准 CLI runner 和 npm test 通过，并满足必需的 status、challenge 和 error 断言时，即视为完成。

Overview

SEP-1932
adopts OAuth 2.0 Demonstrating Proof of Possession
(RFC 9449) as an optional MCP
authorization extension for sender-constrained access tokens. When a client
presents a DPoP-bound token, the MCP server (resource server) must verify a
DPoP proof on every request before granting access.

This issue covers MCP server conformance only. It validates that a server
acting as an OAuth 2.1 resource server correctly applies the RFC 9449 §4.3 proof
checking steps, enforces the ±5-minute iat acceptance window, returns correct
401 / WWW-Authenticate: DPoP challenges, and continues to enforce the baseline
token audience requirements.

Key properties of the server role:

• The framework drives the server as a DPoP client, presenting valid proofs
  for positive checks and deliberately malformed proofs for negative checks.
• The proposal adopts DPoP as defined in RFC 9449 — no MCP-specific extensions
  to proof validation are expected.
• A conformant stateless server provides replay protection via the iat window
  and standard claim validation; jti tracking and nonces are optional.

Specification References

• SEP-1932 PR: https://github.com/modelcontextprotocol/modelcontextprotocol/pull/1932
• Detailed proposal: https://github.com/modelcontextprotocol/ext-auth/blob/pieterkas-dpop-extension/specification/draft/dpop-extension.mdx
• RFC 9449 — OAuth 2.0 Demonstrating Proof of Possession (DPoP): https://www.rfc-editor.org/rfc/rfc9449.html
  • §4.2 DPoP Proof JWT Syntax, §4.3 Checking DPoP Proofs (the core checklist)
  • §6 Public Key Confirmation (cnf/jkt), §7 DPoP-bound access tokens
  • §7.1 The DPoP Authentication Scheme and WWW-Authenticate challenge
  • §9 Resource Server-Provided Nonce, §11.1 DPoP Proof Replay
• Baseline MCP Authorization specification (resource-server token validation and
  audience binding): https://modelcontextprotocol.io/specification/draft/basic/authorization

Scope

In scope — what the MCP/resource server does:

• Requiring the DPoP Authorization scheme and a DPoP proof header on
  protected requests.
• Applying every RFC 9449 §4.3 proof-checking step.
• Enforcing the ±5-minute iat acceptance window.
• Confirming the access token is bound to the proof key (cnf/jkt agreement).
• Returning correct 401 responses with a WWW-Authenticate: DPoP challenge
  (including the algs parameter and the appropriate error code).
• Optional server-provided nonce issuance and enforcement.
• Continuing to enforce baseline token audience validation when DPoP is used.

Not in scope (covered elsewhere or by another role):

• Client proof construction and nonce-retry behaviour — covered by the client
  conformance issue.
• Authorization-server token binding, metadata, and token-endpoint nonce —
  covered by the authorization-server conformance issue.
• Cryptographic algorithm policy beyond rejecting none/symmetric algorithms.

Changes Required

Conformance harness (framework acting as a DPoP client)

• The framework, acting as a DPoP client, presents a DPoP-bound access
  token (Authorization: DPoP <token>) plus a DPoP proof to the server under
  test.
• Fixture generation for: a valid key pair, a DPoP-bound access token whose
  cnf.jkt matches the proof key and whose audience matches the server under
  test, and a matched valid proof.
• A library of crafted invalid proofs, one per §4.3 failure mode, each
  designed to trigger a specific rejection so the server's response is
  predetermined.

Test authorization server (createAuthServer)

• Mint DPoP-bound access tokens (correct audience, cnf.jkt) for the server under
  test to validate. Only needed to the extent the server requires a trusted,
  audience-correct token to reach the proof-validation path.

Helpers (helpers/)

• DPoP proof builder with per-field overrides (so each negative fixture can
  perturb exactly one claim/header: wrong htu, wrong htm, stale/future iat,
  missing jti, typ != dpop+jwt, alg=none/symmetric, private key in jwk,
  bad signature, wrong/absent ath, duplicate DPoP header, mismatched
  cnf/jkt).
• JWK SHA-256 thumbprint and ath helpers.

Scenario (src/scenarios/server/)

• A single scenario file implementing all checks below, registered in the server
  scenario list.

Acceptance test suite

• Helper unit tests (proof builder field overrides, thumbprint, ath), and
  scenario acceptance tests asserting each check passes for a conformant server
  and fails for a deliberately non-conformant one.

Components that do not change

• The MCP protocol/JSON-RPC interaction is unchanged; only the Authorization
  scheme and the added DPoP proof verification differ.

Checks to Cover

Positive (valid proof accepted)

• A request with a valid DPoP-bound token and matching proof is accepted and
  the MCP operation succeeds.
• Server accepts a proof whose iat is within the ±5-minute window.

Negative (RFC 9449 §4.3 — each rejected with 401 + WWW-Authenticate: DPoP error="invalid_dpop_proof" unless noted)

• More than one DPoP header field present.
• DPoP header is not a single, well-formed JWT.
• A required claim is missing (jti, htm, htu, iat).
• typ JOSE header is not dpop+jwt.
• alg is none or a symmetric algorithm (or otherwise unacceptable).
• Signature does not verify against the embedded jwk.
• jwk JOSE header contains a private key.
• htm does not match the request method.
• htu does not match the request target URI (ignoring query/fragment).
• iat is outside the acceptable window (stale and far-future both rejected).
• ath is missing or does not equal the hash of the presented access token.
• The access token's bound key (cnf.jkt) does not match the proof's public
  key → rejected with error="invalid_token".
• A DPoP-bound token presented with the Bearer scheme is rejected.
• Baseline: a token whose audience is not this server is rejected (401),
  even with an otherwise valid proof.

Optional nonce behaviour (only if the server advertises/requires nonces)

• Server issues 401 ... error="use_dpop_nonce" with a DPoP-Nonce header
  when it requires a nonce and none is present.
• Server accepts the subsequent request carrying the matching nonce claim.
• Server rejects a proof whose nonce does not match a recently supplied
  value.

Challenge format

• 401 responses carry WWW-Authenticate: DPoP and SHOULD include the algs
  parameter listing acceptable JWS algorithms.

Acceptance Criteria

• A single scenario file in src/scenarios/server/ implements all checks
  above (one scenario, many checks).
• Each §4.3 check has both a passing case (valid proof accepted) and a
  deliberate failing case (crafted invalid proof rejected with the correct
  status and error code) proven by the automated acceptance test suite.
• Helper unit tests cover the proof builder's per-field overrides and the
  thumbprint/ath helpers.
• The acceptance test suite runs as part of npm test.
• Scenario runs through the standard CLI runner; no parallel entry point is
  introduced.
• Validated against at least one real SDK server implementation before the PR
  is submitted; SDK baseline YAMLs updated where existing SDKs do not yet
  support DPoP.

Out of Scope

• Required jti state-tracking / global replay store — optional per RFC 9449
  §11.1. A stateless server relying on the iat window and claim validation is
  conformant; jti-tracking is tested only as optional behaviour if advertised.
• Server-side nonce cryptographic construction (e.g. AEAD-encrypted
  timestamps) — an implementation choice; only the observable nonce challenge/
  acceptance protocol is tested.
• Client proof construction and authorization-server behaviour — covered by the
  separate client and authorization-server conformance issues.

Notes

Prepared with the aid of Claude (Opus 4.8)