Request zero hop advert from repeater (privately or direct)
维护者通常 1 天内回复
还没有人认领这个 Issue。
评估
- 难度
- 5/5
- 预计耗时
- 一周以上
- 新手友好度
- 35/100
- Issue 类型
- 功能
- 描述清晰度
- 基本清楚
- 活跃度
- 活跃
- 技术栈
- c
- 领域
- networking
调研方向
Start by reading the repeater advert and private messaging flows; the issue does not name files, tests, or entry points, so locate those in the repository. Determine how an advert request should work for direct or private delivery and under guest login, then define and test the behavior for requesting and sharing a repeater advert.
由索引模型根据 Issue 内容生成。
描述
While converting over to MeshCore in Evansville, I've been wishing for the ability to request an advert from a repeater.
The default is 47 hours for a flood advert and 0 hours for a zero hop advert.
Let's face it, many new repeaters are put up by those not knowing how important to send a flood advert after setting location and syncing the time. Although an advert is not needed for repeating traffic or public messages, for those (including the new user) wanting to set routes, private message won't be able too until after the advert. This also delays creating neighbors and map visibility for days or at least until the advert is sent and heard. And if there is no observer, or no one to add it to the internet map after receiving the advert then it is further delayed.
It is necessary to receive an advert to share a contact to the internet map or to share via zero hop advert. For new repeaters that are not connected to my observer, the only option is to drive to that repeater and wait and hope to get an advert so I can share it with my observer later via a zero hop advert.
Today I asked a friend to change his repeater id due to a conflict with an anonymous repeater that didn't care they took his id. With no contact info for the new repeater, I had to ask my friend to change his id. He is only connected to one other repeater and not the rest of town (we are working on it). No one got the advert. If only, I could request an advert to me like a private message. Or under the guest login, I could request a zero hop advert be sent out. Then I can add him to the map and meshmapper, let's mesh and my meshcore server. At this point my option is to sit for two days or drop off a companion to wait the two days.
This seems to be a design flaw. Requesting a private message advert would be perfect.
Thanks!
- 主要语言
- C
- 星标
- 3.9k
- 派生
- 1.5k
- 平均合并
- 18 小时 59 分钟
- 30 天内合并 PR
- 28
环境准备
这个项目没有提供开发容器、Dockerfile 或贡献指南，环境需要你自己搭建：先看它的 README，通用步骤见我们的新手贡献指南。
从这里开始
- 先读完整个 Issue，再读项目的贡献指南。
- 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
- Fork 仓库，在一个分支上完成修改。
- 提交 Pull Request，并在描述里引用这个 Issue 编号。
meshcore-dev/MeshCore 的其他 Issue
-
难度 2/5 1-3 小时 新手友好度 63/100
meshcore-dev/MeshCore#3622 ·
维护者通常 1 天内回复
-
[Feature Request] Set Australia (Mid) Preset to automatically enable 2 byte default path hash size未关闭
难度 2/5 1-3 小时 新手友好度 62/100
meshcore-dev/MeshCore#3571 · 5 个 reaction ·
维护者通常 1 天内回复
-
难度 2/5 1-3 小时 新手友好度 74/100
meshcore-dev/MeshCore#3567 · 1 条评论 ·
维护者通常 1 天内回复
-
难度 2/5 1-3 小时 新手友好度 78/100
meshcore-dev/MeshCore#3549 ·
维护者通常 1 天内回复
-
难度 2/5 1-3 小时 新手友好度 77/100
meshcore-dev/MeshCore#3513 ·
维护者通常 1 天内回复
查看 meshcore-dev/MeshCore 的全部 Issue
相似的 Issue
-
难度 2/5 1-3 小时 新手友好度 78/100
micropython/micropython#19786 ·
维护者通常 1 天内回复
-
难度 2/5 1-3 小时 新手友好度 84/100
vercel-labs/zerolang#442 ·
-
难度 2/5 1-3 小时 新手友好度 75/100
维护者通常 1 天内回复
-
triage
难度 2/5 1-3 小时 新手友好度 67/100
维护者通常 1 天内回复
-
mewencode: base256[] and base128[] are indexed out of bounds by a non-ASCII octet可能已有人在做 @kazu-yamamoto 今天认领。 未关闭
难度 2/5 1-3 小时 新手友好度 78/100
kazu-yamamoto/Mew#276 ·
维护者通常 1 天内回复