Connected companion does not update its own location on map
维护者通常 1 天内回复
还没有人认领这个 Issue。
评估
- 难度
- 3/5
- 预计耗时
- 1-2 天
- 新手友好度
- 55/100
- Issue 类型
- 缺陷
- 描述清晰度
- 基本清楚
- 活跃度
- 活跃
- 技术栈
- ios
- 领域
- mobile
调研方向
Start in the iOS app’s connected companion location update and map marker code; the issue does not name files or tests. Check how changing latitude and longitude values from the connected T1000-E are received and reflected on the map. Done means the connected radio’s map icon follows its changing GPS location without reconnecting.
由索引模型根据 Issue 内容生成。
描述
I'm using Meshcore on iOS with a T1000-E as a bluetooth connected companion. I went for a walk in my neighborhood to see how far away I could get from my home nodes and still reach them. What I noticed was that the icon for my connected radio, which was in my pocket, did not ever update its location on the map. I can get the icon to move to where I currently am by disconnecting the bluetooth connection and reconnecting. I can also see the lat/long values on the settings page change as I walk around, but the icon never moves on the map. So it seems that the iOS app is either not requesting lat/long from the radio, or it isn't doing anything with those changing lat/long values.
What I would expect to happen is that my icon on the map would update as I moved by reading the companion's GPS location.
- 主要语言
- C
- 星标
- 3.9k
- 派生
- 1.5k
- 平均合并
- 19 小时 9 分钟
- 30 天内合并 PR
- 27
环境准备
这个项目没有提供开发容器、Dockerfile 或贡献指南，环境需要你自己搭建：先看它的 README，通用步骤见我们的新手贡献指南。
从这里开始
- 先读完整个 Issue，再读项目的贡献指南。
- 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
- Fork 仓库，在一个分支上完成修改。
- 提交 Pull Request，并在描述里引用这个 Issue 编号。
meshcore-dev/MeshCore 的其他 Issue
-
难度 2/5 1-3 小时 新手友好度 63/100
meshcore-dev/MeshCore#3622 ·
维护者通常 1 天内回复
-
[Feature Request] Set Australia (Mid) Preset to automatically enable 2 byte default path hash size未关闭
难度 2/5 1-3 小时 新手友好度 62/100
meshcore-dev/MeshCore#3571 · 5 个 reaction ·
维护者通常 1 天内回复
-
难度 2/5 1-3 小时 新手友好度 74/100
meshcore-dev/MeshCore#3567 · 1 条评论 ·
维护者通常 1 天内回复
-
RTC_RX8130CE writes and reads the one-hot WEEK register as a number可能已有人在做 关联的 PR 仍在进行中或已合并。 未关闭
难度 2/5 1-3 小时 新手友好度 78/100
meshcore-dev/MeshCore#3549 ·
维护者通常 1 天内回复
-
Repeater: CLI reply to 'setperm <key> 0' is lost when the removed ACL entry sits before the requester (stale ClientInfo* after array shift)可能已有人在做 关联的 PR 仍在进行中或已合并。 未关闭
难度 2/5 1-3 小时 新手友好度 77/100
meshcore-dev/MeshCore#3513 ·
维护者通常 1 天内回复
查看 meshcore-dev/MeshCore 的全部 Issue
相似的 Issue
-
难度 2/5 1-3 小时 新手友好度 88/100
quickjs-ng/quickjs#1836 ·
维护者通常 2 天内回复
-
难度 2/5 1-3 小时 新手友好度 65/100
open-quantum-safe/liboqs#2637 ·
维护者通常 1 天内回复
-
Go device SDK: Whisper transcriber keeps buffering and transcribing audio appended after Stop()可能已有人在做 @apoorvdarshan 今天认领。 未关闭
难度 2/5 1-3 小时 新手友好度 84/100
BasedHardware/omi#22770 ·
维护者通常 1 天内回复
-
fido_do_ecdh() reports any getKeyAgreement failure as FIDO_ERR_INTERNAL可能已有人在做 @brlumen 今天认领。 未关闭
难度 2/5 1-3 小时 新手友好度 74/100
维护者通常 1 天内回复
-
难度 2/5 1-3 小时 新手友好度 78/100
joncampbell123/dosbox-x#6698 ·
维护者通常 1 天内回复