Firebase functions container silently freezes on making a get request to Firestore if multiple requests were created before container starts
还没有人认领这个 Issue。
评估
调研方向
先从 functions-python/main.py 及其 requirements.txt 中的复现开始,然后查看链接的 firebase-functions-python issue 181。部署 Firebase Functions for Python 示例,并运行文档中说明的 hey 并发请求测试,以确认 Firestore doc.get() 冻结。完成标准是为无响应的容器识别出可靠的修复或缓解方案,并将其实现或记录下来。
由索引模型根据 Issue 内容生成。
描述
Environment
- Operating System version: Firebase Functions for Python (v2), Cloud Run
- Firebase SDK version: firebase-admin==6.4.0
- Firebase Product: firestore
- Python version: 3.11
- Pip version: 23.0.1
Description
Context
We've noticed this issue on our production and dev environments in Firebase, and launched an investigation together with GCP support (Support Case 49715474). GCP acknowledged the strange behaviour, but they were eventually unhelpful, offering generic advice on how it can be partially mitigated, which does not work in our use case, and it doesn't solve the issue. I continued the investigation on my own, and I think I pinned down the cause.
The issue seems to be rather generic and in my opinion very serious (silent failure -> no recovery until container goes out of scope), and happens for at least 1 use case which I presume is common in Firebase Functions: reading a document in Firestore using firebase_admin library. Since it seems one of the major use cases for firebase_admin, I decided to raise an issue also here.
I'd be very grateful for any suggestions to solve or mitigate this issue, as we've completely blocked on that right now.
Here is a reference to the issue on firebase-functions-python: https://github.com/firebase/firebase-functions-python/issues/181
What happens
- Python function is silently freezing on an attempt to read a document in firestore (
firestore.client().document.get()) if multiple invocations were requested in a short period of time (in my tests I used as low as 5 invocations submitted as quickly as possible). - Further attempts to invoke the function do not produce any result.
This behaviour is observed in both http-triggered functions and firestore-triggered functions.
Reproduction and results
Setup
Standard Firebase Functions for Python setup, as suggested by the official documentation.
In the section below I provide minimal code to reproduce the behaviour. I provide the code for http-triggered function, as it is easier to test (for firestore-triggered need to get service key to write to db, etc; but the behavior is exactly the same).
I deploy the function to a Firebase Project (with Blaze plan).
npx firebase-tools --version
12.5.3
npx firebase-tools deploy --only functions:functions-python
Additional setup:
- In Firestore, create a collection "test" with document "testDoc" (and any content, e.g. {"test" : "test"}). I did it manually through Firebase Console. However, in reality this is not necessary, as the issue is reproducible even without it.
- In Cloud Run -> open Function -> Security -> Allow unauthenticated invocations
Reproduction
I use hey to generate requests.
hey -n 10 -c 10 https://http-trig-read-fs-l-<...>.a.run.app
Summary:
Total: 20.0057 secs
Slowest: 0.0000 secs
Fastest: 0.0000 secs
Average: NaN secs
Requests/sec: 0.4999
Response time histogram:
Latency distribution:
Details (average, fastest, slowest):
DNS+dialup: NaN secs, 0.0000 secs, 0.0000 secs
DNS-lookup: NaN secs, 0.0000 secs, 0.0000 secs
req write: NaN secs, 0.0000 secs, 0.0000 secs
resp wait: NaN secs, 0.0000 secs, 0.0000 secs
resp read: NaN secs, 0.0000 secs, 0.0000 secs
Status code distribution:
Error distribution:
[10] Get "https://http-trig-read-fs-l-<...>-uc.a.run.app": context deadline exceeded (Client.Timeout exceeded while awaiting headers)
As you can see, the endpoint is unresponsive. In the Cloud Run logs we can see the issue (I am posing the end of the log, there are no further log statements in response to this run:
The container becomes completely unresponsive, and functions run until they time out (can be seen in Cloud Run metrics -- run times just above 1 minute is when 1 did this load test):
However, if after the container goes out of score, or the function is redeployed to renew the container revision, I first try to make a single request to "wake up" the container, it can then process very high loads.
hey -n 1 -c 1 https://http-trig-read-fs-l-<...>-uc.a.run.app
Summary:
Total: 0.6506 secs
Slowest: 0.6505 secs
Fastest: 0.6505 secs
Average: 0.6505 secs
Requests/sec: 1.5372
....
Status code distribution:
[200] 1 responses
hey -n 100 -c 100 https://http-trig-read-fs-l-<...>-uc.a.run.app
Summary:
Total: 1.9869 secs
Slowest: 1.9861 secs
Fastest: 0.4788 secs
Average: 1.2266 secs
Requests/sec: 50.3297
...
Status code distribution:
[200] 100 responses
Relevant Code:
firebase.json
...
"functions": [{
"source": "functions-python",
"codebase": "functions-python",
"ignore": ["venv", ".git", "firebase-debug.log", "firebase-debug.*.log"],
"runtime": "python311"
}],
...
functions-python/requirements.txt
firebase_functions==0.2.0
functions-python/main.py
(I added print statements before every code line so that it is apparent where the function freezes)
from firebase_admin import firestore, initialize_app
from firebase_functions import https_fn, options
initialize_app()
counter = 0
# note that defining firestore client inside or outside the function doesn't make any difference, I tried both
print("firestore.client()")
db = firestore.client()
@https_fn.on_request(
cors=options.CorsOptions(
cors_origins=["*"],
cors_methods=["get", "post"],
)
)
def http_trig_read_fs_l(req: https_fn.Request) -> https_fn.Response:
print("global counter")
global counter
print("db.collection('test')")
col = db.collection("test")
print("col.document('testDoc')")
doc = col.document("testDoc")
print("doc.get()")
get = doc.get()
print("get.to_dict()")
data_dict = get.to_dict()
print("counter += 1")
counter += 1
print("counter", counter, "data", data_dict)
return https_fn.Response(f"counter {counter} data {data_dict}")
- 主要语言
- Python
- 星标
- 1.2k
- 派生
- 359
- 平均合并
- 3 天 9 小时
- 30 天内合并 PR
- 3
贡献指南
从这里开始
- 先读完整个 Issue,再读项目的贡献指南。
- 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
- Fork 仓库,在一个分支上完成修改。
- 提交 Pull Request,并在描述里引用这个 Issue 编号。
firebase/firebase-admin-python 的其他 Issue
-
api: remoteconfig
难度 2/5 1-3 小时 新手友好度 75/100
firebase/firebase-admin-python#957 · 1 条评论 ·
-
api: database type: feature request
难度 2/5 1-3 小时 新手友好度 62/100
-
难度 4/5 3-5 天 新手友好度 45/100
firebase/firebase-admin-python#978 · 1 条评论 ·
-
[FR] Support VERIFY_AND_CHANGE_EMAIL in generate_email_action_link (parity with firebase-admin-node) 未关闭api: auth
firebase/firebase-admin-python#949 · 2 条评论 · 1 个 reaction · 已指派 1 人 ·
-
难度 4/5 3-5 天 新手友好度 43/100
firebase/firebase-admin-python#945 · 1 条评论 · 1 个 reaction ·
查看 firebase/firebase-admin-python 的全部 Issue
相似的 Issue
-
enhancement
难度 2/5 1-3 小时 新手友好度 70/100
canonical/paas-charm#368 · 1 条评论 ·
-
难度 2/5 1-3 小时 新手友好度 75/100
-
tech debt
难度 2/5 1-3 小时 新手友好度 75/100
-
难度 1/5 1 小时以内 新手友好度 90/100
StevenBlack/hosts#3256 ·
-
难度 1/5 1 小时以内 新手友好度 90/100
qualcomm/qai-appbuilder#275 ·