[BUG] [Artix & Gentoo] [Sakura] Freezes on --gen-config with changing logo option and/or full json config
维护者通常 1 天内回复
还没有人认领这个 Issue。
评估
调研方向
在已报告的系统上，使用带有已更改 logo 选项以及完整或最小 JSON 配置的 --gen-config，复现 /usr/bin/fastfetch 中的卡死问题。首先在调试器下调查 --gen-config 的执行；对于受影响的 logo 和 JSON 组合，配置生成能够在不发生卡死的情况下完成，即表示完成。
由索引模型根据 Issue 内容生成。
描述
Read the FAQ first
- I have checked the FAQ but the issue is not covered
Not a known issue
- I have checked the existing issues but the issue is not covered
- My issue is not about crashing on Fedora and KDE 6.6
Description
Made a quick verification of this being a new issue. Potentially missed it if said issue is a duplicate.
What I have tried:
- Attempted to create a full .json config without a logo.
- Tried various toggled options to verify the issue wasn't one of them.
- Tried a full logo with a full .json config, same issue.
- Tried a minimal .json config with no logo.
- Tried a minimal logo with both full and minimal .json configs.
- Deleting previous config files to verify the problem isn't with overwriting
- Killing the affected process with Ctrl+C (does nothing)
- Killing the affected process with htop
- Tested all of the above on a Gentoo system registering version 2.65.2-r1
Tested up to 30 mins per option to verify.
What I haven't tried:
- Newer version via AUR/Git. Attempting to keep a fairly stable system.
- Building version 2.67.1 from source code (Artix)
What does work:
- The --gen-config flag without adding any changes to the logo.
- The --gen-config flag without adding any changes to the verbosity of the generated config.
- Killing affected processes via xkill on Sakura
Doubtful this will help, but both systems have these in common:
- OpenRC for an init system
- BTRFS File System, 3 partition layout in order: EFI, Root, Swap
- Sakura for a Terminal Emulator
- CWM window manager
- soteria root prompt
- polybar with the same config
- Pure X11 (No Wayland components, Gentoo built against it)
- elogind
- xcompmgr compositor
- 1920x1080 display (stranger things have happened from displays, can't rule it out)
- ALSA Pulseaudio configuration
- Environment Agnostic GUI tools (e.g. xfe, leafpad, palemoon)
- Clang Compiler (maybe important for Gentoo, Artix used the binary)
Version used
2.67.1 (x86_64)
Bug prevalence
Always
Regression
No
Installation
Package manager
Package manager
pacman/yay wrapper and portage via Clang Compiler
Screenshots
No response
Configuration
Stacktrace
Reading symbols from /usr/bin/fastfetch...
This GDB supports auto-downloading debuginfo from the following URLs:
<https://debuginfod.artixlinux.org>
Enable debuginfod for this session? (y or [n]) y
Debuginfod has been enabled.
To make this setting permanent, add 'set debuginfod enabled on' to .gdbinit.
(No debugging symbols found in /usr/bin/fastfetch)
Starting program: /usr/bin/fastfetch
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/usr/lib/libthread_db.so.1".
(Fastfetch ran normally here, redacted for privacy)
[Inferior 1 (process 8184) exited normally]
❌️ No stack.
- 主要语言
- C
- 星标
- 24.8k
- 派生
- 908
- 平均合并
- 22 小时 1 分钟
- 30 天内合并 PR
- 22
环境准备
- 没有 Dockerfile 或 Docker Compose 文件
- 有 Pull Request 模板
- 阅读贡献指南
从这里开始
- 先读完整个 Issue，再读项目的贡献指南。
- 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
- Fork 仓库，在一个分支上完成修改。
- 提交 Pull Request，并在描述里引用这个 Issue 编号。
fastfetch-cli/fastfetch 的其他 Issue
-
logo request
难度 1/5 1 小时以内 新手友好度 90/100
fastfetch-cli/fastfetch#2607 ·
维护者通常 1 天内回复
-
logo request
难度 2/5 1-3 小时 新手友好度 72/100
fastfetch-cli/fastfetch#2590 ·
维护者通常 1 天内回复
-
bug
难度 2/5 1-3 小时 新手友好度 74/100
fastfetch-cli/fastfetch#2587 · 1 条评论 ·
维护者通常 1 天内回复
-
logo request
难度 2/5 1-3 小时 新手友好度 68/100
fastfetch-cli/fastfetch#2568 ·
维护者通常 1 天内回复
-
[LOGO] EnderOS未关闭logo request
难度 2/5 1-3 小时 新手友好度 72/100
fastfetch-cli/fastfetch#2556 ·
维护者通常 1 天内回复
查看 fastfetch-cli/fastfetch 的全部 Issue
相似的 Issue
-
难度 2/5 1-3 小时 新手友好度 68/100
trezor/trezor-firmware#7997 ·
维护者通常 2 天内回复
-
难度 2/5 1-3 小时 新手友好度 84/100
维护者通常 1 天内回复
-
area/ysql kind/bug priority/medium status/awaiting-triage
难度 2/5 1-3 小时 新手友好度 84/100
yugabyte/yugabyte-db#34415 ·
维护者通常 1 天内回复
-
难度 1/5 1-3 小时 新手友好度 78/100
KhronosGroup/OpenCL-Headers#318 ·
-
0.kind: build failure
难度 2/5 1-3 小时 新手友好度 73/100
维护者通常 1 天内回复