Hacktoberfest 2026:维护者为十月标记出来的 issue,仍然开放、适合新手。 浏览 Hacktoberfest issue

IC-705 mixing VFOs / frequencies

未关闭
#387 1 条评论 0 个 reaction 已指派 0 人 在 GitHub 查看

还没有人认领这个 Issue。

评估

难度
4/5
预计耗时
3-5 天
新手友好度
12/100
Issue 类型
缺陷
描述清晰度
基本清楚
活跃度
停滞
技术栈
c, linux
领域
desktop

调研方向

The payload names no source files. Start by reproducing the report: connect Gpredict to an IC-705 through hamlib's rigctl or wfview, then watch how the uplink and downlink VFO frequencies are set during PTT. Done means uplink and downlink frequencies stay separate across PTT in both full and half duplex modes. Expect the rig-control code to need radio-specific knowledge, and the issue has had no reply in 228 days.

由索引模型根据 Issue 内容生成。

描述

radio

I'm trying to use Gpredict with IC-705.

I've tried couple of setups:

Gpredict -> wfview (2.11) -> Wifi -> IC-705
Gpredict -> hamlib (homebrew.sh, supposedly 4.6.5 but rigctl shows 4.6.3) -> USB -> IC-705

In both cases I have an issue with Gpredict mixing uplink and downlink. I've tried to configure the radio as half duplex and full duplex.

In case of full duplex, if I push PTT sometimes the Downlink gets overwritten with Uplink. This happens quite often for me.
In case of half duplex, the Uplink sometimes gets overwritten with Downlink, this is not that often but it happens.

I'd really like to utilize 2 VFOs since TX/RX switch is instant and that works way better for linear SATs and CW. Plus I need LSB/USB for linear sats so I kind of need the full duplex mode.

主要语言
C
星标
1.2k
派生
305
平均合并
8 小时 48 分钟
30 天内合并 PR
3

环境准备

  • 没有 Dockerfile 或 Docker Compose 文件
  • 没有 Pull Request 模板
  • 阅读贡献指南

从这里开始

  1. 先读完整个 Issue,再读项目的贡献指南。
  2. 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
  3. Fork 仓库,在一个分支上完成修改。
  4. 提交 Pull Request,并在描述里引用这个 Issue 编号。

csete/gpredict 的其他 Issue

查看 csete/gpredict 的全部 Issue

相似的 Issue

更多 C Issue

把新 issue 发到你的邮箱

精选适合新手参与的 GitHub issue 摘要。