Memory pressure: the console shows a worker's step
维护者通常 1 天内回复
还没有人认领这个 Issue。
评估
- 难度
- 3/5
- 预计耗时
- 1-2 天
- 新手友好度
- 74/100
- Issue 类型
- 功能
- 描述清晰度
- 描述清楚
- 活跃度
- 活跃
- 技术栈
- typescript
调研方向
Start with ui/src/model/fleet.ts, worker-page.ts, and stale-keys.ts; the issue identifies each model seam and the corresponding tests. Read the referenced tests and ui/AGENTS.md first, then run the listed Vitest command. Done means the step appears with its word and tone in the Fleet square and Memory card, the event marks workers stale, and the unit tests and pnpm lint pass.
由索引模型根据 Issue 内容生成。
描述
Part of #1355.
Scope
An operator sees a worker's memory-pressure step in the console. The Fleet row's square names it, and the worker page's Memory card has a row for it, on a gateway and on a standalone worker alike. A memory.pressure-changed event refreshes what the console shows.
In short
flowchart LR
S[status.get capacity.memoryPressure] --> F[Fleet row square: findings *new word*]
S --> W[worker page Memory card: Paused row *new*]
E[memory.pressure-changed] -->|*new* marks workers stale| S
| Step | Fleet square word and colour | Worker page Memory card row |
|---|---|---|
new-devices-paused |
new devices paused, red |
Paused: new devices (red) |
warming-paused |
warming paused, amber |
Paused: warming (amber) |
none, or no field |
nothing new | no row |
| worker not connected | nothing new: disconnected already wins, as today (ui/src/model/fleet.ts:31) |
no Memory card, as today |
The square still shows the worst finding, and each colour keeps its word. Of two findings with the same colour the square shows the first (F7), so the step's finding goes before the pressure and figure findings: at warming-paused with memory pressure warn the square reads warming paused, and at new-devices-paused with memory pressure critical it reads new devices paused.
If this goes wrong, the console shows a worker as calm while it refuses new devices, or the other way round.
Technical spec
Facts
Commit 6674ad0c.
| # | Fact | Source |
|---|---|---|
| F1 | The Fleet row's findings come from loadFindings: none for a worker not connected; memory pressure warn/critical with tone warn/error |
ui/src/model/fleet.ts:45-65 |
| F2 | The worker page's Memory card takes its tone from the pressure and lists a Pressure detail row |
ui/src/model/worker-page.ts:207-211, ui/src/model/worker-page.ts:233-245 |
| F3 | An event's stale keys come from staleKeys; capacity.changed marks the workers key; no test file covers it |
ui/src/model/stale-keys.ts:18-31, rg -l "staleKeys" ui/src e2e printed only stale-keys.ts and ui/src/state/queries.ts |
| F4 | The Fleet tests cover the square's findings, pressure included | ui/src/model/fleet.test.ts:84 |
| F5 | The console page documents the square's colours and words | website/src/content/docs/docs/worker/console.mdx:104-108 |
| F6 | Colour is never the only signal; orange is never a state | ui/AGENTS.md (Look) |
| F7 | workerHealth keeps the first finding of the worst tone; loadFindings pushes the pressure finding last |
ui/src/model/fleet.ts:19-22, ui/src/model/fleet.ts:46-65 |
Modules touched
Searches: loadFindings, pressureStatus, figureCards, staleKeys, capacity.changed in ui/src.
flowchart LR
SC[screens fleet, worker page] --> ST[state hooks]
ST --> M1[model fleet.ts *]
ST --> M2[model worker-page.ts *]
Q[state queries.ts] --> M3[model stale-keys.ts *]
ui/src/model/fleet.ts: a finding fromworker.capacity?.memoryPressure, placed before the pressure and figure findings (F7).ui/src/model/worker-page.ts: thePauseddetail row on the Memory card.ui/src/model/stale-keys.ts:memory.pressure-changedmarks the workers key; a newui/src/model/stale-keys.test.ts.- Docs: website
worker/console.mdx(the square table),fleet-console.mdxif it lists the words.
Contract and event changes
none: the console reads capacity.memoryPressure (#1361) and memory.pressure-changed (#1361) as types only.
Other code on the same state
Searches: readers of worker.capacity and worker.load.memory in ui/src/model (fleet.ts, worker-page.ts, overview.ts).
overview.tsreads capacity figures for counts only, not the step; unchanged.- The pressure finding (F1) and the step finding can both show; the square takes the worse tone, as today.
- On a gateway, the console sees a new step only after the gateway refreshes that worker's view; until #1364 adds the event to the gateway's refresh list, that is its 30 s tick. Accepted: no Depends on #1364.
- #1145 and #1156 (other features' drafts) edit the
staleKeysswitch andworker-page.ts; whichever lands second rebases. No Depends on: they are not ready.
Failure modes
none: the change crosses no boundary and writes no state.
Rules in play
- ui manual: "Colour is never the only signal"; every new tone carries its word.
- ui manual: "
src/model/has no React and no network, so every rule is a plain unit test." - ui manual: "An event marks keys stale through
src/model/stale-keys.ts."
Tests
The seam is the model builders, modelled on ui/src/model/fleet.test.ts and ui/src/model/worker-page.test.ts.
- An operator's console shows a worker's step on its card and page:
new-devices-pausederror tone with words;warming-pausedwarn tone;warming-pausedbesidememory pressure warnreadswarming paused;new-devices-pausedbesidememory pressure criticalreadsnew devices paused; none nothing. - A
memory.pressure-changedevent marks the console's workers stale: the event marks workers; an unrelated event does not.
Done when
pnpm exec vitest run --project unit ui/src/model/fleet.test.ts ui/src/model/worker-page.test.ts ui/src/model/stale-keys.test.tspasses.pnpm lintpasses.
Out of scope
- A new screen or a chart of the step over time.
Depends on
- #1361
Written by an agent.
- 主要语言
- TypeScript
- 星标
- 535
- 派生
- 21
- 平均合并
- 9 小时 10 分钟
- 30 天内合并 PR
- 454
环境准备
这个项目没有提供开发容器、Dockerfile 或贡献指南,环境需要你自己搭建:先看它的 README,通用步骤见我们的新手贡献指南。
从这里开始
- 先读完整个 Issue,再读项目的贡献指南。
- 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
- Fork 仓库,在一个分支上完成修改。
- 提交 Pull Request,并在描述里引用这个 Issue 编号。
callstackincubator/simlock 的其他 Issue
-
os:windows request:new
难度 2/5 1-3 小时 新手友好度 70/100
callstackincubator/simlock#1071 ·
维护者通常 1 天内回复
-
A learned kind keeps one ready copy while its copies are leased可能已有人在做 @V3RON 今天认领。 未关闭task:blocked
难度 4/5 3-5 天 新手友好度 20/100
callstackincubator/simlock#1381 · 1 条评论 ·
维护者通常 1 天内回复
-
Warm pool keeps a spare learned copy while its copies are held可能已有人在做 关联的 PR 仍在进行中或已合并。 未关闭feature:planned
难度 4/5 3-5 天 新手友好度 35/100
callstackincubator/simlock#1374 · 2 条评论 ·
维护者通常 1 天内回复
-
request:new
难度 3/5 1-2 天 新手友好度 55/100
callstackincubator/simlock#1372 ·
维护者通常 1 天内回复
-
bug:new
难度 4/5 1-2 天 新手友好度 55/100
callstackincubator/simlock#1371 · 2 条评论 ·
维护者通常 1 天内回复
查看 callstackincubator/simlock 的全部 Issue
相似的 Issue
-
bug
难度 2/5 1-3 小时 新手友好度 78/100
Yeraze/meshmonitor#6239 ·
维护者通常 1 天内回复
-
难度 2/5 1-3 小时 新手友好度 82/100
better-auth/better-auth#12292 · 1 个 reaction ·
维护者通常 1 天内回复
-
The sample email preview's ResizeObserver is never disconnected and keeps raising errors after leaving Settings可能已有人在做 关联的 PR 仍在进行中或已合并。 未关闭bug
难度 2/5 1-3 小时 新手友好度 82/100
维护者通常 1 天内回复
-
area:ui bug effort:S priority:P2
难度 2/5 1-3 小时 新手友好度 72/100
维护者通常 1 天内回复
-
Typo in WSL project description on Projects page可能已有人在做 @akhil9tiet 今天认领。 未关闭
难度 1/5 1 小时以内 新手友好度 75/100
microsoft/opensource.microsoft.com#1066 · 1 条评论 ·