Hacktoberfest 2026:维护者为十月标记出来的 issue,仍然开放、适合新手。 浏览 Hacktoberfest issue

iOS: the alert-unrecognized warning of `open --launch-url` says to `alert accept`, which grants App Tracking Transparency when that is the alert

已关闭 适合新手
#3,921 1 条评论 0 个 reaction 已指派 0 人 在 GitHub 查看

维护者通常 1 天内回复

还没有人认领这个 Issue。

评估

难度
2/5
预计耗时
1-3 小时
新手友好度
70/100
Issue 类型
缺陷
描述清晰度
描述清楚
活跃度
活跃
技术栈
ios, typescript

调研方向

从 packages/daemon/src/sessions/session-lifecycle/internal/session-open-execution.ts 中的 launchConfirmationUnansweredWarning 开始,然后检查 issue 引用的 open 帮助内容和 website/docs/docs/commands.md 中的相关段落。更新 alert-unrecognized 的指导,使调用方先检查警报,并根据其标题决定是否接受。三处来源都不再建议对无法识别的警报使用 alert accept 时,即为完成;可选结果字段属于额外范围。

由索引模型根据 Issue 内容生成。

描述

bug ready-for-agent

Summary

On an iOS simulator, open --launch-url recognizes only the English Open in “…”? confirmation with the Cancel and Open buttons. For any other alert, it exits 0 with launchConfirmation: "unanswered", launchConfirmationReason: "alert-unrecognized", and this warning:

iOS shows an alert this open did not recognize (alert-unrecognized), so it left the launch URL unconfirmed. Inspect the current alert with alert get before answering it with alert accept.

agent-device help open gives the same next step: "in both cases inspect the warning and answer with alert get then alert accept". So does commands.md: "Inspect with alert get, then answer with alert accept."

But an alert that open does not recognize is not always the launch confirmation. In our runs, it was the App Tracking Transparency prompt that the app shows at launch (Allow “<app>” to track your activity…). An agent that follows the warning taps Allow, and the simulator's TCC.db records auth_value 2 (allowed) for kTCCServiceUserTracking. The agent gets no signal that it granted a permission, and every later check that depends on the tracking answer is wrong.

Environment

  • agent-device 0.21.29 (measured). The warning, the open help and commands.md are unchanged in 0.21.30, 0.21.31 and on main (b08b5e7).
  • Xcode 27.1, iPhone 17e simulator on iOS 27.0, English locale.
  • Expo development build, with a custom URL scheme that the app owns. The app shows the App Tracking Transparency prompt at launch.
  • The app had already received a deep link on this simulator, so iOS did not show the Open in confirmation. The tracking answer was reset before each run.

Steps

xcrun simctl privacy "$SIM" reset all <bundle-id>
npx agent-device open <bundle-id> --launch-url "<scheme>://..." --platform ios --udid "$SIM" --relaunch --json
npx agent-device alert get --platform ios --udid "$SIM"
npx agent-device alert accept --platform ios --udid "$SIM"   # the step that the warning gives
sqlite3 ~/Library/Developer/CoreSimulator/Devices/"$SIM"/data/Library/TCC/TCC.db \
  "select auth_value from access where service='kTCCServiceUserTracking' and client='<bundle-id>'"

Results

  • open exited 0 with launchConfirmation: "unanswered", launchConfirmationReason: "alert-unrecognized" and the warning above in 9 runs out of 9, 4 of them at the largest Dynamic Type size.
  • alert get returned the title of the App Tracking Transparency prompt.
  • alert accept, as the warning says, recorded auth_value 2 (allowed). alert dismiss recorded 0 (denied).

Cause

answerLaunchConfirmation returns alert-unrecognized for every alert that isLaunchConfirmation rejects. At that point, open does not know whether the alert is a launch confirmation in another language or a different alert. But launchConfirmationUnansweredWarning gives alert accept as the answer in both cases.

The title and the buttons that open read go only to the warn diagnostic ios_launch_confirmation_unanswered. serializeOpenResult does not return them, so a --json caller must run alert get to know which alert it is.

Suggested fix

  1. For alert-unrecognized, do not tell the caller to alert accept. Tell it to read the alert with alert get and to answer it from its title: alert accept only when it is the launch confirmation (for example, a translated Open in prompt). Any other alert, such as a permission prompt, is the app's own alert, and the caller answers it on its own terms. Apply the same change to the open help and to commands.md.
  2. Optionally, return the alert's title and buttons in the open result when the reason is alert-unrecognized (for example, launchConfirmationAlert: { title, buttons }). The caller can then choose its answer without one more alert get.

Expected

The alert-unrecognized warning does not tell the caller to accept an alert that may not be the launch confirmation.

Related

  • #3732 added alert-unrecognized and this warning. It tested the warning only with a translated launch confirmation (French simulator), where alert accept is the correct answer.
  • #3627 / #3715: alert dismiss tapped Allow on the same App Tracking Transparency prompt (fixed).
主要语言
TypeScript
星标
5.1k
派生
339
平均合并
12 小时 57 分钟
30 天内合并 PR
653

环境准备

  • 没有 Dockerfile 或 Docker Compose 文件
  • 没有 Pull Request 模板
  • 阅读贡献指南

从这里开始

  1. 先读完整个 Issue,再读项目的贡献指南。
  2. 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
  3. Fork 仓库,在一个分支上完成修改。
  4. 提交 Pull Request,并在描述里引用这个 Issue 编号。

callstack/agent-device 的其他 Issue

查看 callstack/agent-device 的全部 Issue

相似的 Issue

更多 TypeScript Issue

把新 issue 发到你的邮箱

精选适合新手参与的 GitHub issue 摘要。