hping packet mess when running same test on same machine

未关闭
#7 1 条评论 0 个 reaction 已指派 0 人 在 GitHub 查看

还没有人认领这个 Issue。

评估

难度
3/5
预计耗时
1-2 天
新手友好度
35/100
Issue 类型
缺陷
描述清晰度
基本清楚
活跃度
停滞
技术栈
c
领域
cli, networking

调研方向

从 rtt.c 中的 rtt() 开始,在同一台机器上的两个控制台中运行所提供的 hping3 命令,以重现该行为。确定不属于当前进程的数据包如何被处理;完成标准是这些数据包不再产生 rtt=0.0 ms,同时有效响应仍然报告其计时结果。

由索引模型根据 Issue 内容生成。

描述

I noticed something related to hping3. Run the following command on the same machine on two different consoles:

sudo hping3 www.times.com -S -p 80

You will see a number of results with "rtt=0.0 ms" on both consoles, that they wouldn't be there if you were running only one command.

I think this is due to both processes catching each other's tcp packets. Since, they figure out they didn't send them, they print a rtt=0.0 ms.

The problem is in the function rtt() in rtt.c where it does *ms_delay = 0. Currently an hping3 process prints a 0.0 when it receives a packet that doesn't belong to it. However, I think in this case the packet should be ignored, and print nothing.

I would like to hear if there is a strong reason why it currently prints 0.0.

主要语言
C
星标
1.7k
派生
367
PR 合并指标
30 天内没有已合并 PR

环境准备

这个项目没有提供开发容器、Dockerfile 或贡献指南,环境需要你自己搭建:先看它的 README,通用步骤见我们的新手贡献指南。

从这里开始

  1. 先读完整个 Issue,再读项目的贡献指南。
  2. 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
  3. Fork 仓库,在一个分支上完成修改。
  4. 提交 Pull Request,并在描述里引用这个 Issue 编号。

antirez/hping 的其他 Issue

查看 antirez/hping 的全部 Issue

相似的 Issue

更多 C Issue

把新 issue 发到你的邮箱

精选适合新手参与的 GitHub issue 摘要。