hping occasionally reports RTT+1s instead of real RTT

未关闭
#48 1 条评论 1 个 reaction 已指派 0 人 在 GitHub 查看

还没有人认领这个 Issue。

评估

难度
2/5
预计耗时
1-3 小时
新手友好度
55/100
Issue 类型
缺陷
描述清晰度
描述清楚
活跃度
停滞
技术栈
c
领域
networking

调研方向

从 issue 中描述的出站数据包时间戳代码开始,该代码会分别调用 time() 和 get_usec(),并检查时间戳如何用于计算 RTT。将分开的时间读取替换为一个 gettimeofday() 结果,然后验证一秒边界附近的响应不再报告额外的 1000ms。

由索引模型根据 Issue 内容生成。

描述

Sometimes hping reports an RTT that is 1000ms larger than all the other values. However, it doesn't actually pause for 1s at that line, it appears that the time is misreported.

      HPING 10.65.1.1 (eth0 10.65.1.1): S set, 40 headers + 0 data bytes
      len=44 ip=10.65.1.1 ttl=63 DF id=0 sport=3000 flags=SA seq=0 win=29200 rtt=3.9 ms
      len=44 ip=10.65.1.1 ttl=63 DF id=0 sport=3000 flags=SA seq=1 win=29200 rtt=1003.7 ms
      len=44 ip=10.65.1.1 ttl=63 DF id=0 sport=3000 flags=SA seq=2 win=29200 rtt=3.4 ms
      len=44 ip=10.65.1.1 ttl=63 DF id=0 sport=3000 flags=SA seq=3 win=29200 rtt=3.0 ms
      len=44 ip=10.65.1.1 ttl=63 DF id=0 sport=3000 flags=SA seq=4 win=29200 rtt=2.7 ms
      len=44 ip=10.65.1.1 ttl=63 DF id=0 sport=3000 flags=SA seq=5 win=29200 rtt=2.3 ms
      len=44 ip=10.65.1.1 ttl=63 DF id=0 sport=3000 flags=SA seq=6 win=29200 rtt=2.0 ms
...

After digging in the codebase, it looks like the problem is this: when storing the timestamp of the outgoing ping, hping does

secs = time(NULL);
usecs = get_usec();

This can fail if the time wraps to the next second between the call to time() and get_usecs().

About to send packet:

  • clock is at 9.999999s, we read the second part as 9

  • clock wraps to 1.000000, we read the usec part as 0

  • record that packet was sent at 9.000000s

Receive response

  • clock is at 10.001000

  • read seconds as 10

  • read usec as 1000

Incorrectly calculate RTT as 10.001000 - 9.000000 = 1.001sec.

Best fix would be to remove the get_usec utility function and call gettimeofday() exactly once and to use the returned tv_sec and tv_usec from the same call.

主要语言
C
星标
1.7k
派生
367
PR 合并指标
30 天内没有已合并 PR

环境准备

这个项目没有提供开发容器、Dockerfile 或贡献指南,环境需要你自己搭建:先看它的 README,通用步骤见我们的新手贡献指南。

从这里开始

  1. 先读完整个 Issue,再读项目的贡献指南。
  2. 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
  3. Fork 仓库,在一个分支上完成修改。
  4. 提交 Pull Request,并在描述里引用这个 Issue 编号。

antirez/hping 的其他 Issue

查看 antirez/hping 的全部 Issue

相似的 Issue

更多 C Issue

把新 issue 发到你的邮箱

精选适合新手参与的 GitHub issue 摘要。