Hacktoberfest 2026:维护者为十月标记出来的 issue,仍然开放、适合新手。 浏览 Hacktoberfest issue

Make the specified frequency for busio.I2C be a ceiling, not an approximation

未关闭
#11,080 1 条评论 0 个 reaction 已指派 0 人 在 GitHub 查看

维护者通常 1 天内回复

还没有人认领这个 Issue。

评估

难度
3/5
预计耗时
1-2 天
新手友好度
48/100
Issue 类型
缺陷
描述清晰度
基本清楚
活跃度
冷清
技术栈
c
领域
embedded-iot

调研方向

Start by reading the busio.I2C frequency-setting implementation and its documentation; the issue does not name specific files or tests. Compare the requested frequency with the actual rate produced, and check related issue #11079 for context. Done means the actual I2C rate never exceeds the requested frequency and the documentation reflects that behavior.

由索引模型根据 Issue 内容生成。

描述

busio

Motivated by #11079

Fix I2C frequency setting so that the given frequency is a ceiling for the actual rate. Don't allow the frequency to be higher. The documentation current says it could be higher or lower, but this causes problems when a higher rate is too high for the attached peripheral.

This is less critical than #11079, because allowed I2C frequencies are more standardized, but I think it's still a good idea.

主要语言
C
星标
4.6k
派生
1.4k
平均合并
1 天 1 小时
30 天内合并 PR
161

环境准备

这个项目没有提供开发容器、Dockerfile 或贡献指南,环境需要你自己搭建:先看它的 README,通用步骤见我们的新手贡献指南。

从这里开始

  1. 先读完整个 Issue,再读项目的贡献指南。
  2. 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
  3. Fork 仓库,在一个分支上完成修改。
  4. 提交 Pull Request,并在描述里引用这个 Issue 编号。

adafruit/circuitpython 的其他 Issue

查看 adafruit/circuitpython 的全部 Issue

相似的 Issue

更多 C Issue

把新 issue 发到你的邮箱

精选适合新手参与的 GitHub issue 摘要。