TimeSyncMessage is sent reliably, so a late one resets the client clock backwards and stalls its NetworkTransforms

未关闭
#4,249 0 条评论 0 个 reaction 已指派 0 人 在 GitHub 查看

维护者通常 3 天内回复

@reginaldalfret 已经在做这个了。

开始于 2026年11月14日。

  • #4253 来自 @reginaldalfret —— 未关闭

评估

难度
4/5
预计耗时
3-5 天
新手友好度
52/100
Issue 类型
缺陷
描述清晰度
描述清楚
活跃度
活跃
技术栈
csharp, unity

调研方向

Start by reading MessageDelivery.cs, NetworkTimeSystem, and NetworkTransform.cs around TickUpdate; the issue identifies these as the points where delivery, clock resets, and skipped transform ticks interact. Reproduce with the stated packet loss and delay, logging ServerTime.Tick and host-observed transform updates. Done means delayed syncs no longer cause backwards clock resets and owned transforms continue sending under the reproduction conditions.

由索引模型根据 Issue 内容生成。

描述

Description

TimeSyncMessage is sent reliably, although MessageDelivery says it's meant to stay unreliable. Under packet loss a time sync arrives late. The client takes its old host tick as current, its time offset passes HardResetThresholdSec (0.2 s by default), and NetworkTimeSystem hard-resets the client's clock backwards.

After that, NetworkTransformTickRegistration.TickUpdate skips while CurrentTick <= m_LastTick. Every NetworkTransform the client owns therefore sends nothing until its clock passes the last tick it sent. Teammates see that player freeze for up to about 0.5 s and then jump.

Details (line numbers from 2.13.3; the same code is in develop-3.x.x today):

  • MessageDelivery.cs: the summary of k_SkipMessageTypes says "Skip the time sync messages since it has always used unreliable network delivery". But the set holds only NamedMessage and Unnamed. So UpdateMessageTypes gives TimeSyncMessage ReliableFragmentedSequenced, and NetworkTimeSystem sends it with MessageDeliveryType<TimeSyncMessage>.DefaultDelivery.
  • NetworkTimeSystem: a sync whose send tick is old by the time it arrives produces a desired offset more than 0.2 s from the current one, so the clock is hard-reset to it, back in time.
  • NetworkTransform.cs:4765 (NetworkTransformTickRegistration.TickUpdate): if (CurrentTick <= m_LastTick) with the comment // TODO FIX: The local NetworkTickSystem can invoke with the same network tick as before. After a backward reset, this skips every tick until the clock catches up.
Reproduce Steps
  1. Host + 1 client (client-server), with the simulated poor connection on the host: about 75 ms delay, ±20 ms jitter and 2% packet loss.
  2. On the client, log NetworkManager.ServerTime.Tick every frame for a few minutes.
  3. Give the client an owner-authoritative NetworkTransform that moves continuously, and log on the host when its state updates arrive.
Actual Outcome

About twice a minute the client's ServerTime.Tick steps backwards (one example: 568 → 548). The client's NetworkTransform sends nothing until its tick passes 568 again, so the host sees it stand still for up to about 0.5 s and then jump.

Expected Outcome

A delayed time sync doesn't move a client's clock backwards, and its transforms keep sending. Possible fixes:

  • send TimeSyncMessage unreliably (add it to k_SkipMessageTypes, as the comment intends), so a lost one is replaced by the next a second later instead of arriving late;
  • or ignore a time sync older than the last one applied;
  • and/or let NetworkTransformTickRegistration recover from a backward tick (reset m_LastTick) instead of skipping until the clock catches up.
Screenshots

None. The numbers come from per-frame logs.

Environment
  • OS: Windows 11 Pro
  • Unity Version: 6000.3.27f1
  • Netcode Version: 2.13.3 (also present in develop-3.x.x and 3.2.0)
  • Netcode Commit: the v2.13.3 release
  • Netcode Topology: Client-Server (host)
Additional Context
  • Unity Transport 2.7.4.
  • Our workaround: each client raises NetworkTimeSystem.HardResetThresholdSec to 1 s when it starts. With that, the backward resets went from about two a minute to none in three minutes under the same conditions.
主要语言
C#
星标
2.3k
派生
465
平均合并
3 天 12 小时
30 天内合并 PR
39

环境准备

从这里开始

  1. 先读完整个 Issue,再读项目的贡献指南。
  2. 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
  3. Fork 仓库,在一个分支上完成修改。
  4. 提交 Pull Request,并在描述里引用这个 Issue 编号。

Unity-Technologies/com.unity.netcode.gameobjects 的其他 Issue

查看 Unity-Technologies/com.unity.netcode.gameobjects 的全部 Issue

相似的 Issue

更多 C# Issue

把新 issue 发到你的邮箱

精选适合新手参与的 GitHub issue 摘要。