Missing SAI1_FS_* pins on STM32U3 family MCU xml files

未关闭
#15 0 条评论 0 个 reaction 已指派 0 人 在 GitHub 查看

还没有人认领这个 Issue。

评估

难度
2/5
预计耗时
1-3 小时
新手友好度
48/100
Issue 类型
缺陷
描述清晰度
基本清楚
活跃度
停滞
领域
embedded-iot

调研方向

Compare STM32U385RGTxQ.xml and STM32U375CETx.xml with the STM32U385VGIx.xml and STM32U375VGIx.xml files and the cited datasheet pages. Check the SAI1_FS_A and SAI1_FS_B alternate-function mappings, then add the missing pin associations so the XML matches the datasheets.

由索引模型根据 Issue 内容生成。

描述

Hello,

I am working on generating pinctrl.dtsi files for each STM32 family to integrate HAL/LL into the Zephyr OS ecosystem.

I observed that the STM32U385RGTxQ.xml file (https://github.com/STMicroelectronics/STM32_open_pin_data/blob/master/mcu/STM32U385RGTxQ.xml) contains only one pin definition for sai1_fs_a. However, the Nucleo U385RG Q datasheet (https://www.st.com/resource/en/datasheet/stm32u385cg.pdf, page 85) shows additional signals available on AF13 linked to PB9 and PE4.

Similarly, the STM32U375CETx.xml file shows the same behavior (see https://www.st.com/resource/en/datasheet/stm32u375ce.pdf, page 83).

On the other hand, PE4 is correctly linked with the SAI1_FS_A signal in the STM32U385VGIx.xml and STM32U375VGIx.xml files.

I have also noticed the same issue with the SAI1_FS_B signal. For some XML files, the PE9 pin is not associated with the signal, unlike what is shown in the datasheets for U375 and U385, where it is available with AF13.

主要语言
没有语言数据
星标
91
派生
14
PR 合并指标
30 天内没有已合并 PR

环境准备

  • 没有 Dockerfile 或 Docker Compose 文件
  • 没有 Pull Request 模板
  • 阅读贡献指南

从这里开始

  1. 先读完整个 Issue,再读项目的贡献指南。
  2. 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
  3. Fork 仓库,在一个分支上完成修改。
  4. 提交 Pull Request,并在描述里引用这个 Issue 编号。

STMicroelectronics/STM32_open_pin_data 的其他 Issue

查看 STMicroelectronics/STM32_open_pin_data 的全部 Issue

相似的 Issue

更多 Embedded & IoT Issue

把新 issue 发到你的邮箱

精选适合新手参与的 GitHub issue 摘要。