Hacktoberfest 2026:维护者为十月标记出来的 issue,仍然开放、适合新手。 浏览 Hacktoberfest issue

It's still possible to accidentally change/switch off the alarm while asleep

未关闭
#2,405 2 条评论 1 个 reaction 已指派 0 人 在 GitHub 查看

还没有人认领这个 Issue。

评估

难度
3/5
预计耗时
1-2 天
新手友好度
45/100
Issue 类型
缺陷
描述清晰度
基本清楚
活跃度
停滞
技术栈
cpp
领域
embedded-iot

调研方向

首先跟踪从响铃中的闹钟进入闹钟配置界面的关闭闹钟流程,然后确定之前的手表界面是如何恢复的。在设备或模拟器上确认该行为:关闭响铃中的闹钟后,应直接返回之前的界面,而不应短暂显示闹钟配置界面。

由索引模型根据 Issue 内容生成。

描述

enhancement UI/UX
Verification
  • I searched for similar issues (including closed issues) and found none was relevant.
Introduce the issue

The recent 1.16 release fixed some important alarm issues - crashes and accidental alarm settings change - which is great.

So now when the alarm is ringing it's only possible to turn it off, other buttons have been hidden.

But just right after turning off the alarm, the alarm configuration screen appears for a few seconds which again enables the possibility of accidentally changing the alarm time or disabling it completely.

Preferred solution

I think that after turning the alarm off, it would be better to skip the alarm config screen and go back directly to any previous screen the watch was in , e.g. main/watchface screen.

Version

1.16

主要语言
C
星标
3.4k
派生
1.1k
平均合并
23 小时 18 分钟
30 天内合并 PR
1

环境准备

在 Codespaces 中打开

在浏览器里用你自己的 GitHub 账号启动这个项目的开发容器。

  • 没有 Dockerfile 或 Docker Compose 文件
  • 没有 Pull Request 模板
  • 阅读贡献指南

从这里开始

  1. 先读完整个 Issue,再读项目的贡献指南。
  2. 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
  3. Fork 仓库,在一个分支上完成修改。
  4. 提交 Pull Request,并在描述里引用这个 Issue 编号。

InfiniTimeOrg/InfiniTime 的其他 Issue

查看 InfiniTimeOrg/InfiniTime 的全部 Issue

相似的 Issue

更多 C Issue

把新 issue 发到你的邮箱

精选适合新手参与的 GitHub issue 摘要。