Battery indicator level tweaks
还没有人认领这个 Issue。
评估
- 难度
- 3/5
- 预计耗时
- 1-2 天
- 新手友好度
- 42/100
- Issue 类型
- 功能
- 描述清晰度
- 基本清楚
- 活跃度
- 停滞
- 技术栈
- cpp
- 领域
- embedded-iot
调研方向
首先跟踪主时钟显示和左侧菜单中使用的电池指示器，包括其电池电量阈值和颜色处理方式。检查 watch-face 自定义颜色和现有的红色低电量状态是否有测试覆盖。完成的标准是填充部分按要求进行圆角处理，并且低电量使用明显的橙色或红色显示，同时不破坏 watch-face 的自定义颜色。
由索引模型根据 Issue 内容生成。
描述
Verification
- I searched for similar issues (including closed issues) and found none was relevant.
Introduce the issue
I'm primarily using the PineTimeStyle, but I suspect it doesn't matter.
- Charge battery to 99%, and the battery level indicator on the main clock display shows one pixel height already drained. In my mind, it's so close to 100%, that it should still appear as a full battery indicator.
- At low battery, I can't remember if it is 10% or 15%, but swipe to the menu on the left, and you see the battery indicator in orange, so it is understood it is a low battery. But on the main clock display, it always shows the indicator as white, and is hard to see how low the indicator is for anything below about 20-25%.
Preferred solution
- Round to the nearest, instead of rounding down. If there are 10 pixels height in the battery, it should be: 95-100%: full 10 pixels, 85-94%: 9 pixels, 75-84%: 8 pixels, ... 5-14%: 1 pixel, 0-4%: 0 pixels. Or similar - don't mind if it is 0-5%, 6-15%, etc.
- I suggest putting the same orange battery indicator on the main clock display when the battery is below 15% (or 10% or whatever the threshold is). It currently turns red for 5% (?) and below, so I like that.
One consideration is that the watch face allows a custom colour for each component, and in fact, I do currently have PineTimeStyle with all orange colour highlights. So orange on orange would be invisible. The battery icon on the main watch fact currently has a black outline. Perhaps the battery icon could have a black outer border and a white inner outline, which changes to orange/red outline at low battery??
Version
1.15.0
- 主要语言
- C
- 星标
- 3.4k
- 派生
- 1.1k
- 平均合并
- 23 小时 18 分钟
- 30 天内合并 PR
- 1
环境准备
在浏览器里用你自己的 GitHub 账号启动这个项目的开发容器。
- 没有 Dockerfile 或 Docker Compose 文件
- 没有 Pull Request 模板
- 阅读贡献指南
从这里开始
- 先读完整个 Issue，再读项目的贡献指南。
- 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
- Fork 仓库，在一个分支上完成修改。
- 提交 Pull Request，并在描述里引用这个 Issue 编号。
InfiniTimeOrg/InfiniTime 的其他 Issue
-
BLE handlers use length fields from the packet without checking how much data arrived可能已有人在做 @DustinHab 于 40 天前认领。 未关闭
难度 4/5 3-5 天 新手友好度 56/100
InfiniTimeOrg/InfiniTime#2485 ·
-
Unexpected jump back to watch face when button pressed可能已有人在做 @SteveAmor 于 83 天前认领。 未关闭bug
难度 4/5 3-5 天 新手友好度 50/100
InfiniTimeOrg/InfiniTime#2461 · 2 条评论 ·
-
Screen doesn't go to sleep after reset countdown app可能已有人在做 @SteveAmor 于 81 天前认领。 未关闭bug
难度 4/5 3-5 天 新手友好度 45/100
InfiniTimeOrg/InfiniTime#2419 · 4 条评论 ·
-
难度 4/5 3-5 天 新手友好度 25/100
InfiniTimeOrg/InfiniTime#2410 ·
-
难度 4/5 3-5 天 新手友好度 45/100
InfiniTimeOrg/InfiniTime#2407 · 4 条评论 ·
查看 InfiniTimeOrg/InfiniTime 的全部 Issue
相似的 Issue
-
难度 2/5 1-3 小时 新手友好度 65/100
sumatrapdfreader/sumatrapdf#6403 ·
-
难度 2/5 1-3 小时 新手友好度 68/100
-
followup
难度 1/5 1 小时以内 新手友好度 83/100
维护者通常 1 天内回复
-
难度 2/5 1-3 小时 新手友好度 68/100
bytecodealliance/StarlingMonkey#343 ·
维护者通常 1 天内回复
-
难度 2/5 1-3 小时 新手友好度 76/100
oetiker/rrdtool-1.x#1392 ·