Hacktoberfest 2026:维护者为十月标记出来的 issue,仍然开放、适合新手。 浏览 Hacktoberfest issue

Firmware update with pinetime-mcuboot-app-dfu-1.14.0.zip and GadgetBridge fails

未关闭
#2,084 5 条评论 2 个 reaction 已指派 0 人 在 GitHub 查看

还没有人认领这个 Issue。

评估

难度
4/5
预计耗时
3-5 天
新手友好度
25/100
Issue 类型
缺陷
描述清晰度
需要澄清
活跃度
停滞
技术栈
cpp

调研方向

未指定源文件、测试或入口点。首先使用 PineTime 固件 1.14.0、GadgetBridge 0.80.0、列出的 Huawei 设备以及 pinetime-mcuboot-app-dfu-1.14.0.zip 压缩包复现该故障。完成的标准应是设备保持连接,并通过 GadgetBridge 完成固件上传。

由索引模型根据 Issue 内容生成。

描述

bug
Verification
  • I searched for similar bug reports (including closed issues) and found none was relevant.
What happened?

GadgetBridge reports "connection problems"

What should happen instead?

GadgetBridge should connect

Reproduction steps

Installed GadgetBridge 0.80.0 on a HUAWEI
PineTime hardware
downloaded on the HUAWEI the pinetime-mcuboot-app-dfu-1.14.0.zip

More details?

I received the PineTime and with my iphone and InfiniLink i connected to it and updated with the latest version 1.14.0
Then I wanted to try out how the updating of the pinetime through DFU would work and therefore i installed GadgetBridge on the HUAWEI
I tried to connect several times , and while the PineTime shows up in the BLE devices, often the connection last few seconds and then disconnect.
A only time I was able to connect, then started the upload of the firmware but then the connection broke again.

Version

v.1.14.0

Companion app

GadgetBridge v 0.80

主要语言
C
星标
3.4k
派生
1.1k
平均合并
23 小时 18 分钟
30 天内合并 PR
1

环境准备

在 Codespaces 中打开

在浏览器里用你自己的 GitHub 账号启动这个项目的开发容器。

  • 没有 Dockerfile 或 Docker Compose 文件
  • 没有 Pull Request 模板
  • 阅读贡献指南

从这里开始

  1. 先读完整个 Issue,再读项目的贡献指南。
  2. 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
  3. Fork 仓库,在一个分支上完成修改。
  4. 提交 Pull Request,并在描述里引用这个 Issue 编号。

InfiniTimeOrg/InfiniTime 的其他 Issue

查看 InfiniTimeOrg/InfiniTime 的全部 Issue

相似的 Issue

更多 C Issue

把新 issue 发到你的邮箱

精选适合新手参与的 GitHub issue 摘要。