Add a reboot warning to the Lua script after changing receiver settings

未关闭 适合新手
#52 0 条评论 0 个 reaction 已指派 0 人 在 GitHub 查看

还没有人认领这个 Issue。

评估

难度
2/5
预计耗时
1-3 小时
新手友好度
67/100
Issue 类型
功能
描述清晰度
基本清楚
活跃度
活跃
技术栈
lua
领域
embedded-iot

调研方向

首先,找到 Lua 脚本处理 receiver 设置更改的位置,以及它向无线电用户显示消息的方式。参考 pin 13 从 PWM 切换到 Serial RX 的示例,确定哪些设置需要重启。在适用的更改后添加警告,并确认这些设置会显示该警告。

由索引模型根据 Issue 内容生成。

描述

Hi, first of all, thank you for your work.

I wanted to report this episode at the flying field: a friend of mine couldn't understand why his receiver wasn't working with the GPS.

If I understood correctly, changing some settings on a receiver requires a restart. For example, changing pin 13 from PWM to Serial RX on a BETAFPV SuperP to connect a GPS.

When using the Web UI, this is clear, but I don't think it's obvious to people who only use the radio with the Lua script.

Would it be possible to add a message to the Lua script warning users to restart the receiver after changing certain settings?

主要语言
Lua
星标
20
派生
6
平均合并
2 天 8 小时
30 天内合并 PR
6

环境准备

这个项目没有提供开发容器、Dockerfile 或贡献指南,环境需要你自己搭建:先看它的 README,通用步骤见我们的新手贡献指南。

从这里开始

  1. 先读完整个 Issue,再读项目的贡献指南。
  2. 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
  3. Fork 仓库,在一个分支上完成修改。
  4. 提交 Pull Request,并在描述里引用这个 Issue 编号。

相似的 Issue

更多 Lua Issue

把新 issue 发到你的邮箱

精选适合新手参与的 GitHub issue 摘要。