GA36-MB A23 doesn't boot (Black Screen)

未关闭
#171 2 条评论 0 个 reaction 已指派 0 人 在 GitHub 查看

还没有人认领这个 Issue。

评估

难度
4/5
预计耗时
一周以上
新手友好度
18/100
Issue 类型
缺陷
描述清晰度
基本清楚
活跃度
活跃
技术栈
c, cpp, shell
领域
embedded-iot

调研方向

The report concerns a firmware image built by the web builder for an A23 variant (script.bin parsing, panel1/panel2 zips) that boots to a black screen on a GA36-MB V1.1 board. Reproducing it requires the physical hardware and the builder's output; the first step is comparing the approved variant's script.bin handling with the board revision in the photos. Done would mean a boot-verified build or a documented root cause, which needs maintainer input on board support.

由索引模型根据 Issue 内容生成。

描述

IMG_20260503_204357 IMG_20260503_204333 IMG_20260503_204402 IMG_20260503_204413

Hi. I have a R36S clone with the GA36-MB V1.1-20251025 motherboard. Your builder parsed my script.bin and returned:

script.bin parsed: 35008 bytes
Approved variant: GA36-MB A23 Underscore
Variant SoC: A23

I built the firmware using your website (tried both goodluck_base_a23_panel1.zip and goodluck_base_a23_panel2.zip). I flashed the images to the SD card using Win32 Disk Imager. The writing process completes successfully.

The problem: When I turn on the device, I get a black screen. I tried both panel variants (panel1 and panel2), and the result is the same — the system does not boot.

Could you please advise what might be causing this? Maybe my board revision requires a different screen driver, or the A23 build doesn't fully support this specific motherboard yet? I have attached photos of the board and the builder's output.

主要语言
C++
星标
54
派生
8
平均合并
16 天 19 小时
30 天内合并 PR
4

环境准备

这个项目没有提供开发容器、Dockerfile 或贡献指南,环境需要你自己搭建:先看它的 README,通用步骤见我们的新手贡献指南。

从这里开始

  1. 先读完整个 Issue,再读项目的贡献指南。
  2. 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
  3. Fork 仓库,在一个分支上完成修改。
  4. 提交 Pull Request,并在描述里引用这个 Issue 编号。

CodeZombie/goodluckOS 的其他 Issue

查看 CodeZombie/goodluckOS 的全部 Issue

相似的 Issue

更多 C++ Issue

把新 issue 发到你的邮箱

精选适合新手参与的 GitHub issue 摘要。