Headphone detection on the A33

未关闭
#133 1 条评论 0 个 reaction 已指派 0 人 在 GitHub 查看

还没有人认领这个 Issue。

评估

难度
4/5
预计耗时
3-5 天
新手友好度
42/100
Issue 类型
功能
描述清晰度
基本清楚
活跃度
活跃
技术栈
cpp
领域
embedded-iot

调研方向

The issue describes headset detection through the A33 vendor kernel's PRCM jack-detect block, with ADC readings and an interrupt flag, but names no project files or tests. First inspect the board's audio and PRCM code and compare it with the vendor kernel's headset driver. Done means detecting both plug and unplug events on the A33 console; the issue says testing is still in progress.

由索引模型根据 Issue 内容生成。

描述

Following up on #7 and #46: there is a way to detect the headphones on the A33 after all. The vendor kernel's headset driver uses a jack-detect block in the PRCM, not the registers at the A64's offsets that I had checked before, and on my v1.1 it responds: the ADC reads 10 with nothing in the jack and 0 with headphones plugged in, and it raises an interrupt flag in both directions. The jack has a normally closed contact to the codec's HBIAS pin, no GPIO involved.

I'm testing a few options on my console and it looks promising. I'll post updates here after testing.

主要语言
C++
星标
54
派生
8
平均合并
16 天 19 小时
30 天内合并 PR
4

环境准备

这个项目没有提供开发容器、Dockerfile 或贡献指南,环境需要你自己搭建:先看它的 README,通用步骤见我们的新手贡献指南。

从这里开始

  1. 先读完整个 Issue,再读项目的贡献指南。
  2. 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
  3. Fork 仓库,在一个分支上完成修改。
  4. 提交 Pull Request,并在描述里引用这个 Issue 编号。

CodeZombie/goodluckOS 的其他 Issue

查看 CodeZombie/goodluckOS 的全部 Issue

相似的 Issue

更多 C++ Issue

把新 issue 发到你的邮箱

精选适合新手参与的 GitHub issue 摘要。