split gimbal and chassis estimators
还没有人认领这个 Issue。
评估
- 难度
- 4/5
- 预计耗时
- 3-5 天
- 新手友好度
- 42/100
- Issue 类型
- 重构
- 描述清晰度
- 基本清楚
- 活跃度
- 冷清
- 技术栈
- c
- 领域
- embedded-iot, robotics
调研方向
Start by locating the gimbal and chassis estimator code and how each is used in the firmware; the issue does not name files or tests. Map their shared and separate responsibilities, then identify simulation or testing entry points that rely on them. Done means each has a separate estimator and the relevant simulation or tests can exercise them independently.
由索引模型根据 Issue 内容生成。
描述
gimbal and chassis should have separate estimators. figure that just makes sense. but also makes simulation/testing easier if things are more modular
- 主要语言
- C
- 星标
- 11
- 派生
- 2
- 平均合并
- 18 天 3 小时
- 30 天内合并 PR
- 3
环境准备
这个项目没有提供开发容器、Dockerfile 或贡献指南,环境需要你自己搭建:先看它的 README,通用步骤见我们的新手贡献指南。
从这里开始
- 先读完整个 Issue,再读项目的贡献指南。
- 在 Issue 下留言说明你要接手 —— 这能避免两个人做同样的事。
- Fork 仓库,在一个分支上完成修改。
- 提交 Pull Request,并在描述里引用这个 Issue 编号。
CU-Robotics/firmware 的其他 Issue
-
good first issue not started
难度 2/5 1-3 小时 新手友好度 90/100
CU-Robotics/firmware#257 ·
-
in progress
难度 2/5 1-3 小时 新手友好度 70/100
CU-Robotics/firmware#222 ·
-
Fix existing clang-tidy findings可能已有人在做 @roccoagain 今天认领。 未关闭
CU-Robotics/firmware#262 · 已指派 1 人 ·
-
not started
难度 5/5 一周以上 新手友好度 35/100
CU-Robotics/firmware#258 ·
-
good first issue not started
难度 3/5 1-2 天 新手友好度 76/100
CU-Robotics/firmware#256 ·
查看 CU-Robotics/firmware 的全部 Issue
相似的 Issue
-
难度 2/5 1-3 小时 新手友好度 71/100
ROCm/rocm-libraries#16108 ·
维护者通常 2 天内回复
-
wiznet_common: emac_wiznet_transmit() reports a frame as failed when the SEND_OK read is delayed (IDFGH-18721)可能已有人在做 @valdijanio 今天认领。 未关闭Status: Opened
难度 2/5 1-3 小时 新手友好度 82/100
espressif/esp-eth-drivers#198 ·
-
难度 2/5 1-3 小时 新手友好度 76/100
维护者通常 1 天内回复
-
难度 2/5 1-3 小时 新手友好度 76/100
schrodinger/pymol-open-source#532 ·
-
难度 2/5 1-3 小时 新手友好度 73/100
facebookexperimental/hermit#347 ·
维护者通常 1 天内回复