Hacktoberfest 2026:維護者為十月標記出來的 issue,仍然開放、適合新手。 瀏覽 Hacktoberfest issue

ARM Devices - Supported Platforms: Add instructions to make bluetooth work on Raspberry pi 4

未關閉
#677 0 則留言 0 個 reaction 已指派 0 人 在 GitHub 檢視

還沒有人認領這個 Issue。

評估

難度
2/5
預估耗時
1-3 小時
新手友好度
45/100
Issue 類型
文件
描述清晰度
描述清楚
活躍度
停滯
技術堆疊
raspberry-pi

研究方向

從 Bluetooth 文件開始,將其中關於 Raspberry Pi 的指南與連結的指南以及此 issue 中針對 Void 的步驟進行比較。更新相關文件以涵蓋對 /boot/config.txt 和 /boot/cmdline.txt 的變更,然後確認這些說明清楚地解釋了應如何在 Raspberry Pi 4 上啟用 Bluetooth。

由索引模型根據 Issue 內容生成。

描述

Following the instruction on the Bluetooth doc are not enough to make Bluetooth work on Raspberry pi 4 (the Bluetooth device is not found).

This guide shows how to do it (ignore the Arch ARM specifics)

These are the relevant steps on Void:

  • Remove the line dtoverlay=bcmbt (if present) from /boot/config.txt and add the following line to the same file:
    dtparam=krnbt=on
  • Make sure that enable_uart=0 is also in /boot/config.txt.
  • In /boot/cmdline.txt, remove all references to ttyAMA0
主要語言
CSS
星號
220
分支
214
PR 合併指標
30 天內沒有已合併 PR

環境準備

從這裡開始

  1. 先讀完整個 Issue,再讀專案的貢獻指南。
  2. 在 Issue 下留言說明你要接手 —— 這能避免兩個人做同樣的事。
  3. Fork 儲存庫,在一個分支上完成修改。
  4. 送出 Pull Request,並在描述裡引用這個 Issue 編號。

void-linux/void-docs 的其他 Issue

查看 void-linux/void-docs 的全部 Issue

相似的 Issue

更多 Documentation Issue

把新 issue 寄到你的電子郵件信箱

精選適合新手參與的 GitHub issue 摘要。