Previous Versions not removing on Winget update

未關閉
#6,474 3 則留言 0 個 reaction 已指派 0 人 在 GitHub 檢視

維護者通常 2 天內回覆

還沒有人認領這個 Issue。

評估

難度
4/5
預估耗時
3-5 天
新手友好度
45/100
Issue 類型
缺陷
描述清晰度
基本清楚
活躍度
活躍
技術堆疊
powershell

研究方向

首先使用提供的 MSIX 和 PowerShell 命令重現升級過程,尤其是 Get-AppxPackage -AllUsers、Add-AppxPackage 以及透過 AppXManifest.xml 進行註冊。比較佈建套件和已安裝套件的版本,並記錄受支援的升級或移除路徑;完成的標準是升級後舊的 DesktopAppInstaller 版本不再存在。

由索引模型根據 Issue 內容生成。

描述

Command-Upgrade Issue-Bug PowerShell
Relevant area(s)

PowerShell Module

Relevant command(s)

winget upgrade

Brief description of your issue

Hi,

Owing to CVE-2026-68821 where we need to update Winget/DesktopAppInstaller, I've been running through some upgrades in my lab environment and noticed some unusual behaviour.

First off, DesktopAppInstaller is not able to be uninstalled, from what I can see, it's by design.
When I update a device to the latest release, I can see both the old and new installed when using Get-AppXPackage, when I check which is provisioned, I can only see the latest version.

This then means, the updated version goes through completely fine, but it's not overwriting the older installed versions, leaving the vulnerability on the devices.

I've also tried to Set-NonRemovableAppsPolicy against the family, which doesnt work, and force register against the appxmanifest, which goes through, but the old version still lives on the device.

Since were utilising the likes of SCCM paired with either an application deployment (using the MSIX directly) or via a script install, Is there a suggested way to upgrade the application and force remove the older versions?

Steps to reproduce

Install Latest MSIX from GH Repo
Use - Get-AppxPackage -AllUsers | Where-Object {$_.Name -Like 'DesktopAppInstaller'}
Both old and new versions show in output

Try using the following script to install and register the software, however both versions still show when using the above query.

<#
.SYNOPSIS
Installs and registers the Windows Desktop App Installer.
.DESCRIPTION
Checks if Windows Desktop App Installer is present, compares the installed
version against the required version, If installed is not present or less
than required. The script will install all dependencies, install
Windows Desktop App Installer and then register the package.
.NOTES
Script Name: Install-WindowsDesktopAppInstaller.ps1
Author: Daniel Fletcher - 2026-08-18
Requires: Requires the following files "Microsoft.DesktopAppInstaller_8wekyb3d8bbwe.msixbundle",
"AppXManifest.xml", "Microsoft.VCLibs.140.00.UWPDesktop_14.0.33728.0_Universal_X64.appx",
"Microsoft.VCLibs.140.00_14.0.33519.0_Universal_X64.appx", "Microsoft.WindowsAppRuntime.1.8_8000.879.2017.0_Universal_X64.msix"
.HISTORY
Version 1.0 - Script inception
#>

######################

MARK: Functions

######################

Log file path and name

$logFilePath = "C:\Windows\fndr\logs"
$logFileName = "$logFilePath\Install-WindowsDesktopAppInstaller.log"

Function to write logs

function Write-Log {
# Write-Log function version: 1.2
param (
[string]$message
)

$timestamp  = Get-Date -Format "yyyy-MM-dd HH:mm:ss"
$logMessage = "$timestamp FNDR - $message"
Write-Output $logMessage

# Ensure log file path exists
if (-not (Test-Path $logFilePath)) {
    New-Item -Path $logFilePath -ItemType Directory | Out-Null
}

# Write log message to log file
Add-Content -Path $logFileName -Value $logMessage

# Prune log entries older than 90 days once per script execution
if (-not $script:LogPrunedThisRun -and (Test-Path $logFileName)) {
    $cutoff = (Get-Date).AddDays(-90)
    $lines  = Get-Content $logFileName | Where-Object {
        try {
            ([datetime]($_.Substring(0,19))) -ge $cutoff
        } catch {
            $true
        }
    }
    Set-Content -Path $logFileName -Value $lines
    $script:LogPrunedThisRun = $true
}

}

######################

MARK: Variables

######################

MSIX Variables

$dependencyPath = "C:\AppInstaller\Dependencies"
$msixPath = "C:\AppInstaller\Microsoft.DesktopAppInstaller_8wekyb3d8bbwe.msixbundle"
$appName = "Microsoft.DesktopAppInstaller"

System Variables

$newInstall = $false

######################

MARK: Pre-Check

######################

Check if dependencies and MSIX bundle exist

if (-not (Test-Path -Path $dependencyPath)){
Write-Log "Dependency path does not exist. Exiting script."
exit 1
}

if (-not (Test-Path -Path $msixPath)){
Write-Log "MSIX Bundle is missing. Exiting script."
exit 1
}

Write-Log "Checking if $appName is installed"

$isInstalled = Get-AppxPackage -AllUsers | Where-Object {$_.Name -like "$appName"} | Sort-Object Version -Descending | Select-Object -First 1

if($isInstalled)
{
Write-Log "$appName is installed."
Write-Log "Current Installed Version: $($isInstalled.Version)"
}

Check if Desktop App is at the required version.

$requiredVersion = "1.30.100.0"

if ($isInstalled -and [version]$isInstalled.Version -eq [version]$requiredVersion) {
Write-Log "$appName is already at the required version. No action needed."
Exit 0
}

######################

MARK: Installation

######################

Install Dependencies

foreach($dependency in Get-ChildItem $dependencyPath){
Write-Log "attempting to install dependency: $($dependency.FullName)"
try{
Add-AppxPackage -Path $dependency.FullName -ErrorAction Stop
Write-Log "Dependency: $($dependency.FullName) installed"
}catch{
Write-Log "Failed to install dependency: $($dependency.FullName). ERROR: $_"
}
}

Start-Sleep 10

Write-Log "attempting to install $appName"
try{
Add-AppxPackage -Path $msixPath -AllUsers -ErrorAction Stop
Write-Log "$appName installed successfully"
$newInstall = $true
}catch{
Write-Log "Failed to install $appName. ERROR: $_"
}

Start-Sleep 10

######################
#MARK: Registration
######################

Attempting to register package

if ($newInstall -eq $true){
$manifest = Get-AppxPackage -AllUsers | Where-Object {$.Name -like "$appName"} | Sort-Object Version -Descending | Select-Object -First 1
$regParams =@{
Register ="$($manifest.InstallLocation)\AppXManifest.xml"
DisableDevelopmentMode = $true
ForceApplicationShutdown = $true
ForceUpdateFromAnyVersion = $true
ErrorAction = 'Stop'
}
Write-Log "Attempting to register $appName..."
try {
Add-AppxPackage @regParams
Write-Log "$appName registered successfully"
}catch{
Write-Log "Failed to register $appName. ERROR: $
"
}
}else{
Write-Log "Failed to install $appName, skipping registration"
exit 1
}

Expected behavior

Only latest version to show after an upgrade from the MSIX

Actual behavior

Both old and new versions show after installation of the MSIX

Environment
<#
.SYNOPSIS
    Installs and registers the Windows Desktop App Installer.
.DESCRIPTION
    Checks if Windows Desktop App Installer is present, compares the installed
    version against the required version, If installed is not present or less
    than required. The script will install all dependencies, install
    Windows Desktop App Installer and then register the package.
.NOTES
    Script Name: Install-WindowsDesktopAppInstaller.ps1
    Author: Daniel Fletcher - 2026-08-18
    Requires: Requires the following files "Microsoft.DesktopAppInstaller_8wekyb3d8bbwe.msixbundle",
                "AppXManifest.xml", "Microsoft.VCLibs.140.00.UWPDesktop_14.0.33728.0_Universal_X64.appx",
                "Microsoft.VCLibs.140.00_14.0.33519.0_Universal_X64.appx", "Microsoft.WindowsAppRuntime.1.8_8000.879.2017.0_Universal_X64.msix"
.HISTORY
    Version 1.0 - Script inception
#>

######################
# MARK: Functions
######################

# Log file path and name
$logFilePath = "C:\Windows\fndr\logs"
$logFileName = "$logFilePath\Install-WindowsDesktopAppInstaller.log"

# Function to write logs
function Write-Log {
    # Write-Log function version: 1.2
    param (
        [string]$message
    )

    $timestamp  = Get-Date -Format "yyyy-MM-dd HH:mm:ss"
    $logMessage = "$timestamp FNDR - $message"
    Write-Output $logMessage

    # Ensure log file path exists
    if (-not (Test-Path $logFilePath)) {
        New-Item -Path $logFilePath -ItemType Directory | Out-Null
    }

    # Write log message to log file
    Add-Content -Path $logFileName -Value $logMessage

    # Prune log entries older than 90 days once per script execution
    if (-not $script:LogPrunedThisRun -and (Test-Path $logFileName)) {
        $cutoff = (Get-Date).AddDays(-90)
        $lines  = Get-Content $logFileName | Where-Object {
            try {
                ([datetime]($_.Substring(0,19))) -ge $cutoff
            } catch {
                $true
            }
        }
        Set-Content -Path $logFileName -Value $lines
        $script:LogPrunedThisRun = $true
    }
}

######################
# MARK: Variables
######################

# MSIX Variables
$dependencyPath = "C:\AppInstaller\Dependencies\"
$msixPath = "C:\AppInstaller\Microsoft.DesktopAppInstaller_8wekyb3d8bbwe.msixbundle"
$appName = "Microsoft.DesktopAppInstaller"

# System Variables
$newInstall = $false

######################
# MARK: Pre-Check
######################

# Check if dependencies and MSIX bundle exist

if (-not (Test-Path -Path $dependencyPath)){
    Write-Log "Dependency path does not exist. Exiting script."
    exit 1
}

if (-not (Test-Path -Path $msixPath)){
    Write-Log "MSIX Bundle is missing. Exiting script."
    exit 1
}

Write-Log "Checking if $appName is installed"

$isInstalled = Get-AppxPackage -AllUsers | Where-Object {$_.Name -like "*$appName*"} | Sort-Object Version -Descending | Select-Object -First 1

if($isInstalled)
{
    Write-Log "$appName is installed."
    Write-Log "Current Installed Version: $($isInstalled.Version)"
}

# Check if Desktop App is at the required version.

$requiredVersion = "1.30.100.0"

if ($isInstalled -and [version]$isInstalled.Version -eq [version]$requiredVersion) {
    Write-Log "$appName is already at the required version. No action needed."
    Exit 0
}

######################
# MARK: Installation
######################

# Install Dependencies
foreach($dependency in Get-ChildItem $dependencyPath){
    Write-Log "attempting to install dependency: $($dependency.FullName)"
    try{
        Add-AppxPackage -Path $dependency.FullName -ErrorAction Stop 
        Write-Log "Dependency: $($dependency.FullName) installed"
    }catch{
        Write-Log "Failed to install dependency: $($dependency.FullName). ERROR: $_"
    }   
}

Start-Sleep 10

Write-Log "attempting to install $appName"
try{
    Add-AppxPackage -Path $msixPath -AllUsers -ErrorAction Stop
    Write-Log "$appName installed successfully"
    $newInstall = $true
}catch{
    Write-Log "Failed to install $appName. ERROR: $_"
}

Start-Sleep 10

######################
#MARK: Registration
######################

# Attempting to register package
if ($newInstall -eq $true){
    $manifest = Get-AppxPackage -AllUsers | Where-Object {$_.Name -like "*$appName*"} | Sort-Object Version -Descending | Select-Object -First 1
    $regParams =@{
        Register    ="$($manifest.InstallLocation)\AppXManifest.xml"
        DisableDevelopmentMode  = $true
        ForceApplicationShutdown    = $true
        ForceUpdateFromAnyVersion   = $true
        ErrorAction = 'Stop'
    }
    Write-Log "Attempting to register $appName..."
    try {
        Add-AppxPackage @regParams
        Write-Log "$appName registered successfully"
    }catch{
        Write-Log "Failed to register $appName. ERROR: $_"
    }
}else{
    Write-Log "Failed to install $appName, skipping registration"
    exit 1
}
主要語言
C++
星號
26.6k
分支
1.8k
平均合併
3 天 10 小時
30 天內合併 PR
41

環境準備

從這裡開始

  1. 先讀完整個 Issue,再讀專案的貢獻指南。
  2. 在 Issue 下留言說明你要接手 —— 這能避免兩個人做同樣的事。
  3. Fork 儲存庫,在一個分支上完成修改。
  4. 送出 Pull Request,並在描述裡引用這個 Issue 編號。

microsoft/winget-cli 的其他 Issue

查看 microsoft/winget-cli 的全部 Issue

相似的 Issue

更多 C++ Issue

把新 issue 寄到你的電子郵件信箱

精選適合新手參與的 GitHub issue 摘要。