[BUG] <title>Container loses bridge network attachment after Ugreen UGOS system update
還沒有人認領這個 Issue。
評估
- 難度
- 4/5
- 預估耗時
- 3-5 天
- 新手友好度
- 25/100
- Issue 類型
- 缺陷
- 描述清晰度
- 需要釐清
- 活躍度
- 活躍
- 技術堆疊
- docker
- 領域
- devops, networking
研究方向
Start with the UGOS Docker GUI configuration and compare the working and broken startup logs, especially eth0 versus lo and the two recorded kernel versions. Reproduce the failure across an update if possible; done means identifying an image-side workaround or documenting that the failure is outside linuxserver/emby and cannot be fixed here.
由索引模型根據 Issue 內容生成。
描述
Is there an existing issue for this?
- I have searched the existing issues
Current Behavior
On a Ugreen NASync DXP480T Plus running UGOS Pro, every system update breaks the container's network attachment. After an update, the container starts and reports as Running, but the NetworkManager only detects the loopback address (127.0.0.1 and ::1) — the bridge address (172.x.x.x) is missing entirely. The container is then unreachable from the network.
The log signature is:
Detected local ip addresses: [{"IPAddress":"127.0.0.1"...},{"IPAddress":"::1"...}]
— with no 172.x address present.
The fix is to delete and recreate the container. This has occurred across at least three separate UGOS updates.
This is likely a UGOS issue rather than an image issue, but documenting it here in case a workaround is possible from the image side (e.g. a restart policy or network health check).
Expected Behavior
No response
Steps To Reproduce
- Run linuxserver/emby container in bridge mode on a Ugreen NASync DXP480T Plus NAS (UGOS Pro)
- Perform a UGOS system update
- After the update, the container restarts automatically
- Attempt to access Emby on port 8096 — connection refused
Environment
OS: UGOS Pro (Debian 12 based), kernel updated by NAS firmware
How docker service was installed: Built into UGOS Pro (Ugreen's Docker app)- OS:
- How docker service was installed:
CPU architecture
x86-64
Docker creation
For **Docker creation**, paste this:
Created via Ugreen UGOS Pro Docker GUI (no CLI access). Settings:
Image: linuxserver/emby:latest
Network mode: bridge
Ports: 8096:8096/TCP, 8920:8920/TCP, 7359:7359/UDP, 1900:1900/UDP
Volumes:
- Shared Folder/docker/emby/config → /config (Read/Write)
- Shared Folder/media → /mnt/media (Read/Write)
Note: Container is created via the UGOS web GUI, not docker CLI or compose.
Container logs
# First occurrence (2026-09-19) — container working correctly after previous fix:
Info NetworkManager: Detected local ip addresses: [{"IPAddress":"172.17.0.3","HasGateWayAddress":true,...},{"IPAddress":"127.0.0.1",...},{"IPAddress":"::1",...}]
# Latest occurrence (2026-09-29) — after UGOS system update, broken state:
Info NetworkManager: networkInterface: Loopback lo, Speed: -1, Description: lo
Info NetworkManager: UnicastAddresses: 127.0.0.1,::1
Info NetworkManager: Detected local ip addresses: [{"IPAddress":"127.0.0.1","HasGateWayAddress":false,...},{"IPAddress":"::1",...}]
# Note: eth0 interface is entirely absent from network detection after the update.
# On working startups, eth0 is detected with GatewayAddress 172.17.0.1 and UnicastAddress 172.17.0.3.
# On broken startups, only the loopback interface (lo) is detected — eth0 is missing.
# The container shows as Running with correct port mappings, but is unreachable externally.
# Fix: delete and recreate the container. Restart does not fix it.
# UGOS kernel before update: #696c5cd7dce5
# UGOS kernel after update: #f586cf5b8315
- 主要語言
- Dockerfile
- 星號
- 152
- 分支
- 49
- 平均合併
- 3 天 13 小時
- 30 天內合併 PR
- 1
環境準備
- 提供 Dockerfile 或 Docker Compose 檔案
- 有 Pull Request 範本
- 閱讀貢獻指南
從這裡開始
- 先讀完整個 Issue,再讀專案的貢獻指南。
- 在 Issue 下留言說明你要接手 —— 這能避免兩個人做同樣的事。
- Fork 儲存庫,在一個分支上完成修改。
- 送出 Pull Request,並在描述裡引用這個 Issue 編號。
linuxserver/docker-emby 的其他 Issue
-
no-issue-activity
難度 4/5 3-5 天 新手友好度 35/100
linuxserver/docker-emby#123 · 7 則留言 ·
查看 linuxserver/docker-emby 的全部 Issue
相似的 Issue
-
Internal Error未關閉bug
難度 2/5 1-3 小時 新手友好度 66/100
frappe/frappe_docker#2071 ·
維護者通常 1 天內回覆
-
難度 2/5 1-3 小時 新手友好度 78/100
維護者通常 1 天內回覆
-
難度 1/5 1 小時以內 新手友好度 86/100
-
難度 2/5 1-3 小時 新手友好度 74/100
melodic-software/claude-code-plugins#17374 · 2 則留言 ·
維護者通常 1 天內回覆
-
難度 2/5 1-3 小時 新手友好度 67/100