PerlIO::via FILENO callback is omitted on open
維護者通常 1 天內回覆
還沒有人認領這個 Issue。
評估
研究方向
Start where a :via handle is opened and layers are pushed: inspect ViaLayer and LayeredIOHandle.fileno() to find the open/layer-setup path, then compare it with the callback-order probe in the issue. Run the gzip reproducer and t/001_roundtrip.t to confirm current behavior. Done means FILENO runs during open before the first WRITE with the expected layer and handle arguments, plus regression tests for ordering and initialization passing on JVM and interpreter backends.
由索引模型根據 Issue 內容生成。
描述
Summary
PerlOnJava does not invoke a PerlIO::via layer's FILENO callback when opening a :via(...) handle. Perl invokes this callback before the first WRITE. A layer that initializes its underlying stream in FILENO therefore reaches WRITE with no initialized state.
This breaks PerlIO-via-gzip 0.03 on both PerlOnJava execution backends. Its FILENO callback initializes IO::Compress::Gzip or IO::Uncompress::Gunzip, and its write/read callbacks require that initialization.
Reproducer
With PerlIO-via-gzip 0.03 available in @INC:
use PerlIO::via::gzip;
my $path = "/tmp/perlio-via-gzip-$$.gz";
open(my $fh, ">:via(gzip)", $path) or die "open: $!";
print {$fh} "hello\n";
close $fh or die "close: $!";
unlink $path;
System Perl completes this successfully. PerlOnJava emits an uninitialized-value warning from PerlIO::via::gzip::FLUSH, then dies from PerlIO::via::gzip::WRITE with handle not initialized.
A callback-order probe gives the minimal behavior difference. For a layer implementing PUSHED, FILENO, WRITE, and FLUSH, system Perl calls:
PUSHED,FILENO,WRITE,FLUSH
PerlOnJava calls:
PUSHED,WRITE,FLUSH,FLUSH,FLUSH
The FILENO callback is omitted on both JVM and interpreter backends.
CPAN and verification evidence
- Distribution:
PerlIO-via-gzip0.03; upstream test:t/001_roundtrip.t. - PerlOnJava CPAN run:
20261120-195805-13340; the test exits after 5 of 10 planned tests with the uninitializedFLUSHwarning andWRITEerror described above. - At PerlOnJava source commit
506371c134837d026687b1958c856edb3c6f70e4,t/001_roundtrip.tpasses all 10 tests on system Perl 5.34.1 and fails after test 5 with the same error on both the JVM and interpreter backends. - The repository
nice -n 19 makegate passed at that commit. - The distribution is pure Perl; its runtime prerequisites are
IO::Compress::GzipandIO::Uncompress::Gunzip.
Environment and implementation notes
Reproduced on macOS 26.7.3 arm64 with OpenJDK 24.0.2.
ViaLayer discovers and implements onFileno(), and LayeredIOHandle.fileno() forwards to it when called. The observed difference is that opening a :via handle does not cause this callback to run before writes, as system Perl does. Please check where FILENO must be triggered during open/layer setup and preserve the callback's return/error semantics.
Acceptance criteria
- A
:vialayer'sFILENOcallback runs during open, before its first read or write callback, matching system Perl. - The callback receives the same layer object and underlying handle arguments expected by PerlIO::via.
- Add focused regression coverage for callback ordering and for a layer that depends on
FILENOinitialization. t/001_roundtrip.tpasses on system Perl, the PerlOnJava JVM backend, and the interpreter backend.
- 主要語言
- Perl
- 星號
- 67
- 分支
- 8
- 平均合併
- 4 小時 36 分鐘
- 30 天內合併 PR
- 123
環境準備
- 提供 Dockerfile 或 Docker Compose 檔案
- 沒有 Pull Request 範本
- 閱讀貢獻指南
從這裡開始
- 先讀完整個 Issue,再讀專案的貢獻指南。
- 在 Issue 下留言說明你要接手 —— 這能避免兩個人做同樣的事。
- Fork 儲存庫,在一個分支上完成修改。
- 送出 Pull Request,並在描述裡引用這個 Issue 編號。
fglock/PerlOnJava 的其他 Issue
-
area:runtime bug
難度 2/5 1-3 小時 新手友好度 72/100
fglock/PerlOnJava#2164 ·
維護者通常 1 天內回覆
-
area:cpan-port bug
難度 2/5 1-3 小時 新手友好度 70/100
fglock/PerlOnJava#2153 ·
維護者通常 1 天內回覆
-
area:cpan-port area:parser bug
難度 2/5 1-3 小時 新手友好度 68/100
fglock/PerlOnJava#2137 ·
維護者通常 1 天內回覆
-
area:backend area:cpan-port area:runtime bug
難度 2/5 1-3 小時 新手友好度 76/100
fglock/PerlOnJava#2071 ·
維護者通常 1 天內回覆
-
area:runtime documentation enhancement
難度 2/5 1-3 小時 新手友好度 72/100
fglock/PerlOnJava#1579 ·
維護者通常 1 天內回覆
查看 fglock/PerlOnJava 的全部 Issue
相似的 Issue
-
Dev-output directory preparation accepts file-valued lib/include paths and fails on dangling links未關閉team-cli
難度 2/5 1-3 小時 新手友好度 70/100
維護者通常 2 天內回覆
-
難度 2/5 1-3 小時 新手友好度 66/100
-
難度 1/5 1 小時以內 新手友好度 93/100
維護者通常 1 天內回覆
-
難度 2/5 1-3 小時 新手友好度 73/100
inverse-inc/packetfence#9728 ·
維護者通常 1 天內回覆
-
fix(char-create): show the real reason a character is refused可能已有人在做 @baphomello 於 1 天前認領。 未關閉
難度 2/5 1-3 小時 新手友好度 84/100
維護者通常 1 天內回覆