ESP32-C3 PinAlarm not firing in light_sleep on level high
維護者通常 1 天內回覆
還沒有人認領這個 Issue。
評估
- 難度
- 4/5
- 預估耗時
- 3-5 天
- 新手友好度
- 52/100
- Issue 類型
- 缺陷
- 描述清晰度
- 基本清楚
- 活躍度
- 活躍
- 領域
- embedded-iot
研究方向
Start by tracing ESP32-C3 light-sleep PinAlarm handling and how it configures the pin for a high-level wake condition; the issue does not name source files or tests. Compare the low-level alarm behavior with the reported high-level case and the three short-sleep workaround. Done when releasing the button wakes light sleep promptly without requiring the workaround.
由索引模型根據 Issue 內容生成。
描述
CircuitPython version and board name
Adafruit CircuitPython 10.3.1 on 2026-09-14; Maker Go ESP32C3 Supermini with ESP32-C3
Board ID:makergo_esp32c3_supermini
Code/REPL
...
wake = alarm.light_sleep_until_alarms(
alarm.time.TimeAlarm(monotonic_time=deadline),
alarm.pin.PinAlarm(
pin=board.IO21,
value=True,
pull=False,
)
)
Behavior
When the (active-low) button is not pressed, I add the alarm:
alarm.pin.PinAlarm(
pin=board.IO21,
value=False,
pull=True,
)
Then the light_sleep returns immediately with the PinAlarm as soon as the button is pressed.
But after that, I call the light sleep again, this time adding:
alarm.pin.PinAlarm(
pin=board.IO21,
value=True,
pull=False,
)
But this time, releasing the button has no effect, and the sleep returns later with a TimerAlarm once the time_monotonic deadline is reached.
I have a workaround: call the light_sleep 3 times with very short deadlines (time_monotonic 10ms in future). After this, I call light_sleep with a much longer timer expiry, and releasing the button has immediate effect.
The electrical wiring has the button pulling the pin to earth, with no other components such as pull-ups.
This issue is asymmetrical, because a PinAlarm waiting for a logic low (button pressed) always returns instantly from the sleep. It's just waiting for logic high that's giving me problems.
Fortunately the workaround has proven effective. But I'd like to find a cleaner solution.
For context, I'm executing the light_sleep in a scheduler run loop, where the scheduler is feeding off a jobs queue, executing jobs that are due to run, and otherwise light_sleeping until the next job is due.
Description
No response
Additional information
No response
- 主要語言
- C
- 星號
- 4.6k
- 分支
- 1.4k
- 平均合併
- 1 天 8 小時
- 30 天內合併 PR
- 183
環境準備
這個專案沒有提供開發容器、Dockerfile 或貢獻指南，環境需要你自己搭建：先看它的 README，通用步驟見我們的新手貢獻指南。
從這裡開始
- 先讀完整個 Issue，再讀專案的貢獻指南。
- 在 Issue 下留言說明你要接手 —— 這能避免兩個人做同樣的事。
- Fork 儲存庫，在一個分支上完成修改。
- 送出 Pull Request，並在描述裡引用這個 Issue 編號。
adafruit/circuitpython 的其他 Issue
-
documentation enhancement
難度 2/5 1-3 小時 新手友好度 67/100
adafruit/circuitpython#11689 ·
維護者通常 1 天內回覆
-
SD card read errors are not reported to the host and send bad data可能已有人在做 @mikeysklar 於 1 天前認領。 未關閉bug sdcardio storage usb
難度 3/5 1-2 天 新手友好度 55/100
adafruit/circuitpython#11715 · 已指派 1 人 ·
維護者通常 1 天內回覆
-
Hard fault with combination of ESP32SPI and wifi monitor可能已有人在做 @dhalbert 於 2 天前認領。 未關閉bug network
adafruit/circuitpython#11710 · 6 則留言 · 已指派 1 人 ·
維護者通常 1 天內回覆
-
Feather RP2350: MAX3421E instead of PIO USB host, or a second build?可能已有人在做 @mikeysklar 於 5 天前認領。 未關閉rp2 usb
adafruit/circuitpython#11697 · 5 則留言 · 已指派 2 人 ·
維護者通常 1 天內回覆
-
rp2040 zephyr
難度 5/5 一週以上 新手友好度 35/100
adafruit/circuitpython#11690 ·
維護者通常 1 天內回覆
查看 adafruit/circuitpython 的全部 Issue
相似的 Issue
-
[compiler-rt] Rtsan-aarch64-NoInstTest: error: no such file or directory: 'NOTFOUND' (libatomic)未關閉build-problem compiler-rt:rtsan platform:linux
難度 2/5 1-3 小時 新手友好度 63/100
llvm/llvm-project#239039 ·
維護者通常 1 天內回覆
-
component:obi contribfest go test
難度 2/5 1 小時以內 新手友好度 83/100
open-telemetry/opentelemetry-ebpf-instrumentation#4143 · 1 則留言 ·
維護者通常 1 天內回覆
-
難度 2/5 1-3 小時 新手友好度 72/100
維護者通常 1 天內回覆
-
Bug :bug:
難度 2/5 1-3 小時 新手友好度 72/100
sonic-net/sonic-buildimage#30541 ·
維護者通常 1 天內回覆