[Bug] 9PFS client trusts server-controlled stat/name lengths in getdents path, leading to out-of-bounds read
維護者通常 1 天內回覆
還沒有人認領這個 Issue。
評估
- 難度
- 4/5
- 預估耗時
- 3-5 天
- 新手友好度
- 42/100
- Issue 類型
- 缺陷
- 描述清晰度
- 基本清楚
- 活躍度
- 冷清
- 技術堆疊
- c
研究方向
從 components/dfs/dfs_v1/filesystems/9pfs/dfs_9pfs.c 中的 p9_transaction()、dfs_9pfs_read()、dfs_9pfs_getdents() 和 get_rx_valueXX_of() helpers 開始;同時檢查 dfs_9pfs.h 和 dirent.h 中相關的宣告。追蹤傳輸層回報的回覆大小如何處理,然後確認格式錯誤的 Rread 回覆會在存取欄位、推進記錄或複製名稱之前被拒絕。
由索引模型根據 Issue 內容生成。
描述
RT-Thread Version
master, verified on current worktree at commit 25295501c0cc7181d6a541a867fdf7214879ddf8
Hardware Type/Architectures
Any BSP using DFS v1 9PFS with an untrusted 9P transport/peer
Develop Toolchain
GCC
Describe the bug
Summary
A 9PFS client-side parsing vulnerability exists in RT-Thread DFS v1 9PFS.
RT-Thread's 9PFS client receives the actual reply size from the transport layer in p9_transaction(), but later parsing code such as dfs_9pfs_getdents() ignores that received size and instead trusts server-controlled fields embedded in the reply body, including count, stat_size, and name_len.
As a result, a malicious 9P server can return a short or malformed reply whose internal size fields cause the client to read beyond the received message buffer while parsing directory entries.
The most realistic impact is denial of service (crash / fault) in the 9PFS client. Depending on memory layout, the client may also copy out-of-bounds data into returned dirent entries and expose unintended memory contents to local callers.
Affected Components
components/dfs/dfs_v1/filesystems/9pfs/dfs_9pfs.ccomponents/dfs/dfs_v1/filesystems/9pfs/dfs_9pfs.hcomponents/libc/compilers/common/include/dirent.h
Key Evidence
1. Actual reply length is discarded by callers
p9_transaction() receives the transport-reported reply length:
components/dfs/dfs_v1/filesystems/9pfs/dfs_9pfs.c:179components/dfs/dfs_v1/filesystems/9pfs/dfs_9pfs.h:132
But callers such as dfs_9pfs_read() and dfs_9pfs_getdents() pass RT_NULL for out_rx_size, so the actual received length is discarded.
2. Field access helpers have no bounds checking
components/dfs/dfs_v1/filesystems/9pfs/dfs_9pfs.c:48
get_rx_value16_of() / get_rx_value32_of() directly read from conn->rx_buffer[idx] by offset without any bounds validation.
3. dfs_9pfs_getdents() trusts server-controlled lengths
Relevant locations:
components/dfs/dfs_v1/filesystems/9pfs/dfs_9pfs.c:815components/dfs/dfs_v1/filesystems/9pfs/dfs_9pfs.c:846components/dfs/dfs_v1/filesystems/9pfs/dfs_9pfs.c:854components/dfs/dfs_v1/filesystems/9pfs/dfs_9pfs.c:880components/dfs/dfs_v1/filesystems/9pfs/dfs_9pfs.c:882
The function uses:
ret = get_rx_value32_of(conn, P9_MSG_READ_COUNT);
stat_size = get_rx_value16_of(conn, off + P9_MSG_STAT_SIZE) + sizeof(rt_uint16_t);
dirp->d_namlen = get_rx_value16_of(conn, off + P9_MSG_STAT_NAME_LEN);
rt_strncpy(dirp->d_name, conn->rx_buffer + off + P9_MSG_STAT_NAME, dirp->d_namlen);
But it does not verify that:
ret <= actual_rx_size - P9_MSG_READ_DATAoff + P9_MSG_STAT_SIZE + 2 <= actual_rx_sizestat_size <= remaining returned dataoff + P9_MSG_STAT_NAME + d_namlen <= actual_rx_size
4. getdents() is worse than read()
dfs_9pfs_read() is still problematic because it ignores the actual reply size, but got is at least constrained by got <= set, and set <= conn->msg_size - P9_MSG_READ_DATA.
dfs_9pfs_getdents() is worse because ret, stat_size, and name_len are all trusted and off keeps increasing based on unvalidated values.
5. Primary issue is source-buffer over-read, not a local dirent destination overflow
components/libc/compilers/common/include/dirent.h:57
d_namlen is uint8_t and d_name is 256 bytes, so the more credible issue is reading past the received 9P reply buffer and then copying that data into the returned dirent.
Impact
If a system mounts an untrusted 9P peer, the peer can send malformed directory reply data that drives the client into out-of-bounds reads while parsing directory entries.
Practical impact:
- Client crash / fault / denial of service
- Undefined behavior during directory enumeration
- Possible copying of out-of-bounds data into returned
direntstructures, which may leak unintended memory contents to local callers
Steps to Reproduce
A practical PoC requires a malicious or instrumented 9P server / transport peer.
- Build RT-Thread with DFS v1 9PFS enabled.
- Connect or mount a 9P peer that the attacker controls.
- Trigger a directory listing on the mounted 9P filesystem so that
dfs_9pfs_getdents()is used. - Return a malformed
Rreadreply where:- The actual received packet is short, but
P9_MSG_READ_COUNTis set larger than the real reply payload, and/or- The embedded stat record
sizefield is inflated, and/or name_lenpoints beyond the actual received message body.
- Observe that the RT-Thread client continues parsing using those server-controlled lengths and reads beyond the valid received reply data.
Expected Behavior
The 9PFS client should track the actual reply size returned by the transport and reject any response whose internal fields exceed that boundary.
In particular:
dfs_9pfs_getdents()should reject replies ifretexceeds the actual received payload size- Each parsed
stat_sizeshould be validated before advancingoff - Each
name_lenshould be validated against the remaining received message length before reading or copying the name
Actual Behavior
The 9PFS client ignores the transport-reported reply length in this parsing path and trusts internal reply fields from the server to drive further buffer reads.
This allows a malicious 9P server to induce out-of-bounds reads during directory entry parsing, likely causing a crash or other denial-of-service condition.
Suggested Fix
The fix should make reply parsing length-aware and reject malformed replies early.
At minimum:
- Propagate and use the actual
rx_sizereturned byp9_transaction()in all reply parsing paths - Reject any
RreadwhereP9_MSG_READ_COUNTexceedsrx_size - P9_MSG_READ_DATA - In
dfs_9pfs_getdents(), before each field access, validate that the corresponding offset is still within the actual received reply length - Reject any record where:
stat_sizeis smaller than the fixed stat headerstat_sizeexceeds the remaining returned dataname_lenextends past the received message boundary
- Stop using raw
get_rx_valueXX_of()on unvalidated offsets for attacker-controlled message bodies
Kindly let me know if you intend to request a CVE ID upon confirmation of the vulnerability.
Other additional context
No response
- 主要語言
- C
- 星號
- 12.3k
- 分支
- 5.5k
- 平均合併
- 7 天 22 小時
- 30 天內合併 PR
- 30
環境準備
在瀏覽器裡用你自己的 GitHub 帳號啟動這個專案的開發容器。
- 沒有 Dockerfile 或 Docker Compose 檔案
- 有 Pull Request 範本
- 閱讀貢獻指南
從這裡開始
- 先讀完整個 Issue,再讀專案的貢獻指南。
- 在 Issue 下留言說明你要接手 —— 這能避免兩個人做同樣的事。
- Fork 儲存庫,在一個分支上完成修改。
- 送出 Pull Request,並在描述裡引用這個 Issue 編號。
RT-Thread/rt-thread 的其他 Issue
-
[bsp][stm32][bluepill] README「快速上手」缺少重新生成 MDK 工程这一步,按文档操作无法编译通过可能已有人在做 @moment-NEW 於 16 天前認領。 未關閉in progress
難度 2/5 1-3 小時 新手友好度 75/100
RT-Thread/rt-thread#11818 · 4 則留言 · 已指派 1 人 ·
維護者通常 1 天內回覆
-
BSP BSP: Loongson bug RT-Smart
難度 2/5 1-3 小時 新手友好度 72/100
RT-Thread/rt-thread#11717 · 2 則留言 ·
維護者通常 1 天內回覆
-
Arch: RISC-V BSP BSP: HPMicro bug
難度 2/5 1-3 小時 新手友好度 72/100
RT-Thread/rt-thread#11687 · 3 則留言 ·
維護者通常 1 天內回覆
-
難度 2/5 1-3 小時 新手友好度 68/100
RT-Thread/rt-thread#11472 · 2 則留言 ·
維護者通常 1 天內回覆
-
難度 5/5 一週以上 新手友好度 25/100
RT-Thread/rt-thread#11898 · 2 則留言 ·
維護者通常 1 天內回覆
查看 RT-Thread/rt-thread 的全部 Issue
相似的 Issue
-
os:linux
難度 2/5 1-3 小時 新手友好度 66/100
mpv-player/mpv#18649 ·
維護者通常 1 天內回覆
-
難度 2/5 1-3 小時 新手友好度 85/100
facebookincubator/muse-gadget-sdk#249 ·
維護者通常 1 天內回覆
-
docs: nng_dial / nng_dialer_start can return NNG_ECONNSHUT and NNG_ECRYPTO, which are not documented未關閉
難度 1/5 1-3 小時 新手友好度 89/100
維護者通常 1 天內回覆
-
難度 2/5 1-3 小時 新手友好度 78/100
micropython/micropython#19786 ·
維護者通常 1 天內回覆
-
難度 2/5 1-3 小時 新手友好度 84/100
vercel-labs/zerolang#442 ·