開放
[BUG] G28: Axes move at slow rate after homing at (0,0) with ABL
Bug: Potential ?C: MotionNeeds: Workgood first issue
2 則留言0 個反應0 負責人
倉庫議題
MarlinFirmware/Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
議題
開放
[FR] Runtime adjustable machine travel limits
F: CalibrationT: Feature Requestgood first issue
21 則留言2 個反應0 負責人
開放
[FR] button multiplexing
C: User InterfaceT: Feature Requestgood first issue
6 則留言2 個反應0 負責人
開放
[BUG] LASER_FEATURE inhibits CONTROLLERFAN_SPEED_ACTIVE setting
Bug: Confirmed !help wanted
29 則留言0 個反應0 負責人
開放
[FR] Lerdge K add support to second Z driver as EX-AXIS
C: Boards/PinsT: Feature Requesthelp wanted
5 則留言0 個反應0 負責人
開放
[FR] Filament Change for DGUS / DWIN
C: LCD & ControllersT: Feature Requesthelp wanted
2 則留言0 個反應0 負責人
開放
[FR] TMC5161 stepper driver support
F: TrinamicT: Feature Requesthelp wanted
84 則留言1 個反應0 負責人
開放
[FR] Explicitly switch stealthChop / spreadCycle per move (i.e., anticipate need for "Hybrid" switching)
F: TrinamicT: Feature Requesthelp wanted
15 則留言0 個反應0 負責人
開放
[FR] Dual zone heated bed support
C: TemperaturesT: Feature Requestgood first issuehelp wanted
26 則留言1 個反應0 負責人