Performance: pcolormesh PNG export misses the 10× Matplotlib target (5.54× in release audit)

Đang mở
  • Có gì không ổn?
#551 0 bình luận 0 reaction 0 người được giao Xem trên GitHub

Maintainer thường phản hồi trong vòng 1 ngày

Chưa có ai nhận issue này.

Đánh giá

Độ khó
5/5
Thời gian dự kiến
Hơn một tuần
Mức phù hợp với người mới
30/100
Loại issue
Lỗi
Độ rõ ràng
Đặc tả rõ ràng
Mức độ hoạt động
Sôi nổi
Công nghệ
matplotlib, numpy, python, rust
Lĩnh vực
backend, data-visualization, performance

Hướng nghiên cứu

Start with benchmarks/bench_pyplot_vs_matplotlib.py and spec/benchmarks/methodology.md; first apply the described DPI correction to the XY save call, then reproduce the pcolormesh row on a controlled runner and capture dimensions and raw samples. Profile build, rasterization, and PNG encoding to identify the measured bottleneck. Done means meeting the 10× standard target with image correctness preserved, or revising the specification with reproducible evidence; record profile results and add a regression benchmark.

Do mô hình lập chỉ mục viết ra từ nội dung của issue.

Mô tả

The matched-output release benchmark found a pcolormesh export gap against the existing per-family 10× Matplotlib/Agg goal in the benchmark methodology.

Workload XY total median Matplotlib total median Speedup XY tier
80 x 120 cells 14.96 ms 82.85 ms 5.54× direct

Both outputs are nonblank 1800×840 PNGs. The metric is figure construction through a completed compressed PNG, excluding imports, data generation and warm-up. XY renders this row directly. Preserve mesh geometry, normalization, colorbar behavior and seam-free cell fills.

These are diagnostic results from three repetitions on a shared workstation, with one warm-up, recorded during the 2026-11-05 release audit. Confirm the gap on a controlled runner before selecting an optimization. This does not establish a regression from v0.0.8.

Reproduce

Audited source: 5e58b12c0a1b89a58c4555af370204ef1ed0515e plus local release-validation fixes. Environment: Linux x86_64, 12 logical CPUs, CPython 3.14.6, NumPy 2.5.1, Matplotlib 3.11.0, native XY core, Rust 1.96.0.

Harness prerequisite: the audited upstream bench_pyplot_vs_matplotlib.py omits export DPI in _xy_render. Set its save call to the following before measuring, matching the Matplotlib adapter:

fig.savefig(out, format="png", dpi=EXPORT_DPI)

Both adapters build at 100 DPI and export at 200 DPI. Without that correction, the harness fails its dimension check before producing a valid comparison. The correction and output-size regression test are prepared locally on farhan/release-validation, but have not landed upstream.

cargo build --release
uv sync --extra matplotlib --group dev
uv pip install 'matplotlib==3.11.0'
MPLBACKEND=Agg uv run --no-sync python benchmarks/bench_pyplot_vs_matplotlib.py \
  --profile smoke --reps 3 --warmups 1 \
  --json /tmp/pyplot-smoke.json

The harness runs all six families; inspect the pcolormesh row. For confirmation and the existing standard target gate:

MPLBACKEND=Agg uv run --no-sync python benchmarks/bench_pyplot_vs_matplotlib.py \
  --profile standard --reps 21 --warmups 3 \
  --target-speedup 10 --require-target \
  --json /tmp/pyplot-standard.json

--require-target gates every family, so a failure in another family does not by itself establish this issue's outcome.

Raw observations
[
  {
    "library": "xy.pyplot",
    "total_samples_ms": [
      15.01132,
      14.961026,
      14.659394
    ],
    "build_median_ms": 0.396198,
    "render_median_ms": 14.516297,
    "total_median_ms": 14.961026,
    "total_p95_ms": 15.01132,
    "png_bytes": 276368
  },
  {
    "library": "matplotlib",
    "total_samples_ms": [
      82.847815,
      80.768711,
      86.329222
    ],
    "build_median_ms": 6.175336,
    "render_median_ms": 76.659255,
    "total_median_ms": 82.847815,
    "total_p95_ms": 86.329222,
    "png_bytes": 55310
  }
]
Acceptance
  • Reproduce on a controlled runner and record environment, exact commit, raw samples, output dimensions and tier decisions.
  • Profile build, rasterization and PNG encoding separately; optimize the measured bottleneck.
  • Meet the existing standard-profile 10× total-time target for pcolormesh, or explicitly revise the specification with reproducible evidence explaining why the target is not met.
  • Retain image correctness, labels and dimensions; do not achieve the target by silently reducing visual quality or dropping data.
  • Record smoke, standard and huge profile results and output sizes, and add a meaningful regression benchmark.
  • Update benchmark evidence and specifications with the resulting behavior.

The local audit report and complete raw comparison are prepared under spec/process/release-validation/2026-11-05/; they are currently uncommitted. The observations above are included here so this issue is reproducible without access to that worktree.

Ngôn ngữ chính
Python
Star
1.9k
Fork
79
Merge trung bình
1 ngày 39 phút
Pull request đã merge (30 ngày)
22

Chuẩn bị môi trường

Bắt đầu từ đâu

  1. Đọc hết issue, rồi đọc hướng dẫn đóng góp của dự án.
  2. Bình luận trên issue rằng bạn sẽ nhận — tránh hai người làm cùng một việc.
  3. Fork repository và làm thay đổi trên một nhánh.
  4. Mở pull request có tham chiếu số hiệu của issue.

Issue khác của reflex-dev/xy

Tất cả issue của reflex-dev/xy

Issue tương tự

Thêm issue về Python

Nhận issue mới trong hộp thư của bạn

Bản tóm tắt ngắn những issue GitHub phù hợp với người mới.