Regression: Qualcomm bootloader/fastboot device (05c6:9500 hub + 05c6:9501 gadget) fails to enumerate on Pi 5 with 6.12/6.18 kernels; worked on 6.1.54
Maintainer thường phản hồi trong vòng 1 ngày
Chưa có ai nhận issue này.
Đánh giá
- Độ khó
- 4/5
- Thời gian dự kiến
- 3-5 ngày
- Mức phù hợp với người mới
- 35/100
- Loại issue
- Lỗi
- Độ rõ ràng
- Cần làm rõ
- Mức độ hoạt động
- Sôi nổi
- Công nghệ
- c, linux
- Lĩnh vực
- embedded-iot, operating-systems
Hướng nghiên cứu
Reproduce the issue on a Pi 5 with the Qualcomm device, then compare USB hub enumeration and dmesg between kernel 6.1.54 and 6.12.25 or later. Done means the 05c6:9501 gadget enumerates behind the 05c6:9500 hub, fastboot devices detects it, and the repeated hub_ext_port_status errors stop.
Do mô hình lập chỉ mục viết ra từ nội dung của issue.
Mô tả
Describe the bug
A Qualcomm QCS-based Android device in bootloader (fastboot) mode presents as a 7-port USB 2.0 hub (05c6:9500, no string descriptors) with the fastboot gadget (05c6:9501) behind port 1 of that hub.
On kernel 6.1.54-1+rpt2 (2023-10-10 Raspberry Pi OS), the gadget enumerates and fastboot works. On 6.12.25+rpt, 6.18.34+rpt and 6.18.39+rpt, the hub enumerates but its downstream port never completes reset — the gadget is never seen — and dmesg floods with hub_ext_port_status failed (err = 3) (~2500 msgs/sec, i.e. the hub returns a 3-byte GetPortStatus response).
The device is certainly out-of-spec (the 9501 gadget also advertises bulk endpoint ... invalid maxpacket 8, which 6.1 logs and tolerates), but per the no-regression principle it worked on 6.1 and no combination of usbcore quirks restores it on 6.12+. This likely affects fastboot flashing of other Qualcomm-ABL-based devices from Pi 5 hosts.
Steps to reproduce the behaviour
Connect a Qualcomm QCS/IoT-platform Android device to a Pi 5 via USB.
adb reboot bootloader (device re-enumerates as 05c6:9500 hub).
fastboot devices → empty; observe dmesg.
Device (s)
Raspberry Pi 5
System
Raspberry Pi 5 Model B rev 1.0 (d04170) and rev 1.1 (d04171)
Raspberry Pi OS Bookworm (2023-10-10, 2025-05-13) and Trixie (2026-06-18)
Kernels: 6.1.54-1+rpt2 (good), 6.12.25-1+rpt1 / 6.18.34+rpt / 6.18.39+rpt (bad)
Device: Qualcomm QCS-based Android IoT device ("YUPIKP-IOT-IDP"), Qualcomm ABL bootloader; normal (non-bootloader) ADB mode (18d1:4ee2) enumerates fine on all kernels
Logs
Working case — 6.1.54-1+rpt2, Pi 5 rev 1.0 (d04170)
usb 3-1: New USB device found, idVendor=05c6, idProduct=9500, bcdDevice= 1.00
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 7 ports detected
usb 3-1.1: new high-speed USB device number 49 using xhci-hcd
usb 3-1.1: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 8
usb 3-1.1: config 1 interface 0 altsetting 0 bulk endpoint 0x2 has invalid maxpacket 8
usb 3-1.1: New USB device found, idVendor=05c6, idProduct=9501, bcdDevice= 1.00
Failing case — 6.12.25+rpt (identical on 6.18.34/6.18.39), Pi 5 rev 1.1 (d04171)
usb 1-1: new high-speed USB device number 29 using xhci-hcd
usb 1-1: New USB device found, idVendor=05c6, idProduct=9500, bcdDevice= 1.00
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: attempt power cycle
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: unable to enumerate USB device
usb 1-1: device descriptor read/64, error -71
hub 1-1:1.0: hub_ext_port_status failed (err = 3) [repeats ~2500/sec]
Additional context
No response
- Ngôn ngữ chính
- C
- Star
- 13.3k
- Fork
- 5.5k
- Merge trung bình
- 4 ngày 10 giờ
- Pull request đã merge (30 ngày)
- 31
Chuẩn bị môi trường
Dự án này không cung cấp dev container, Dockerfile hay hướng dẫn đóng góp, nên bạn cần tự thiết lập môi trường: hãy bắt đầu từ README và xem hướng dẫn đóng góp lần đầu của chúng tôi để biết các bước chung.
Bắt đầu từ đâu
- Đọc hết issue, rồi đọc hướng dẫn đóng góp của dự án.
- Bình luận trên issue rằng bạn sẽ nhận — tránh hai người làm cùng một việc.
- Fork repository và làm thay đổi trên một nhánh.
- Mở pull request có tham chiếu số hiệu của issue.
Issue khác của raspberrypi/linux
-
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 68/100
raspberrypi/linux#7415 · 2 bình luận · 1 reaction ·
Maintainer thường phản hồi trong vòng 1 ngày
-
rp1-cfe doesn't forward V4L2_EVENT_SOURCE_CHANGE event from csi-2 sensor driver to userspace appĐang mở
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 72/100
raspberrypi/linux#7399 · 1 bình luận ·
Maintainer thường phản hồi trong vòng 1 ngày
-
Documentation update requiredĐang mở
Độ khó 1/5 Dưới một giờ Mức phù hợp với người mới 82/100
raspberrypi/linux#7357 · 1 bình luận ·
Maintainer thường phản hồi trong vòng 1 ngày
-
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 68/100
raspberrypi/linux#7054 · 2 bình luận ·
Maintainer thường phản hồi trong vòng 1 ngày
-
Độ khó 4/5 3-5 ngày Mức phù hợp với người mới 48/100
raspberrypi/linux#7770 ·
Maintainer thường phản hồi trong vòng 1 ngày
Tất cả issue của raspberrypi/linux
Issue tương tự
-
Độ khó 1/5 Dưới một giờ Mức phù hợp với người mới 85/100
Maintainer thường phản hồi trong vòng 1 ngày
-
A letter from the pastĐang mởslice
Độ khó 2/5 Dưới một giờ Mức phù hợp với người mới 72/100
Life-Framework/Life-Framework#3465 ·
Maintainer thường phản hồi trong vòng 1 ngày