Convert Type Parameters to follow PEP 695 syntax introduced in Python 3.12
Maintainer thường phản hồi trong vòng 1 ngày
@FrancescoPezzella đang làm issue này rồi.
Từ ngày 14/10/2026.
Đánh giá
- Độ khó
- 4/5
- Thời gian dự kiến
- 3-5 ngày
- Mức phù hợp với người mới
- 22/100
- Loại issue
- Tái cấu trúc
- Độ rõ ràng
- Khá rõ ràng
- Mức độ hoạt động
- Sôi nổi
- Công nghệ
- python
- Lĩnh vực
- developer-experience
Hướng nghiên cứu
The issue gives one example: a pipe method with overloads that uses module-level TypeVar and ParamSpec declarations, in a file over 1000 lines. Before editing, check the project's minimum supported Python version and read the three comments to see whether maintainers have agreed to adopt PEP 695 syntax. Done would mean one module converted, its type checker passing, and any remaining TypeVar uses (such as covariant ones) explained.
Do mô hình lập chỉ mục viết ra từ nội dung của issue.
Mô tả
What is your issue?
Background
https://peps.python.org/pep-0695/ introduced new syntax for Type Parameters.
Out of interest, I took a quick look through the project due to another project I am working on and noticed that this project uses Python 3.12, but still uses a mix of syntax introduced in 3.5 (for reference: https://peps.python.org/pep-0484/) and 3.12, instead of fully modernizing the syntax (where it can be safely done) to the new one.
Sometimes a change cannot be done, for example, if a TypeVar declares covariance/contravariance in a Generic class, since these cases are handled automatically in Python 3.12, and there is no new way to define with the modern syntax.
Example
Old Syntax
from typing import (
...
ParamSpec,
TypeVar,
...
)
T_Resample = TypeVar("T_Resample", bound="Resample")
C = TypeVar("C")
T = TypeVar("T")
P = ParamSpec("P")
@overload
def pipe(
self,
func: Callable[Concatenate[Self, P], T],
*args: P.args,
**kwargs: P.kwargs,
) -> T: ...
@overload
def pipe(
self,
func: tuple[Callable[..., T], str],
*args: Any,
**kwargs: Any,
) -> T: ...
def pipe(
self,
func: Callable[Concatenate[Self, P], T] | tuple[Callable[P, T], str],
*args: P.args,
**kwargs: P.kwargs,
This is a perfect example, where the code could greatly benefit from the new syntax. The file is over a 1000 lines long, the Type Variables are not used anywhere else nor exported. The new syntax would greatly simplify them. This follows Python conventions.
With the new syntax
@overload
def pipe[T, P**](
self,
func: Callable[Concatenate[Self, P], T],
*args: P.args,
**kwargs: P.kwargs,
) -> T: ...
@overload
def pipe[T](
self,
func: tuple[Callable[..., T], str],
*args: Any,
**kwargs: Any,
) -> T: ...
def pipe[T, P**](
self,
func: Callable[Concatenate[Self, P], T] | tuple[Callable[P, T], str],
*args: P.args,
**kwargs: P.kwargs,
This is just one example. I am still looking into this just as interesting case study regarding my research. If this is something that the developers are interested in, I would be happy to look into it more, investigate each case and propose a change with a tool that I am still developing.
Let me know if you would further information, I am quite to making issues and contributions, so I tried my best to follow some examples I read here.
No AI was used in the writing of this.
- Ngôn ngữ chính
- Python
- Star
- 4.2k
- Fork
- 1.5k
- Merge trung bình
- 2 ngày 21 giờ
- Pull request đã merge (30 ngày)
- 74
Chuẩn bị môi trường
Khởi chạy dev container của dự án ngay trên trình duyệt, bằng tài khoản GitHub của bạn.
- Không có Dockerfile hay tệp Docker Compose
- Có mẫu pull request
- Đọc hướng dẫn đóng góp
Bắt đầu từ đâu
- Đọc hết issue, rồi đọc hướng dẫn đóng góp của dự án.
- Bình luận trên issue rằng bạn sẽ nhận — tránh hai người làm cùng một việc.
- Fork repository và làm thay đổi trên một nhánh.
- Mở pull request có tham chiếu số hiệu của issue.
Issue khác của pydata/xarray
-
xarray removes axis grid from pcolormeshCó thể đã có người làm @Sealdot đã nhận hôm nay. Đang mởbug needs triage
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 70/100
Maintainer thường phản hồi trong vòng 1 ngày
-
`DataTree.map_over_datasets` behavior can be obscure sometimesCó thể đã có người làm @mohansree14 đã nhận 24 ngày trước. Đang mởneeds triage
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 78/100
pydata/xarray#11813 · 1 bình luận ·
Maintainer thường phản hồi trong vòng 1 ngày
-
Comparing attrs that contain a dict of NumPy arrays raises ValueError in identical / assert_identicalCó thể đã có người làm @SohamXYZDev đã nhận 29 ngày trước. Đang mởbug needs triage
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 73/100
pydata/xarray#11777 · 1 bình luận ·
Maintainer thường phản hồi trong vòng 1 ngày
-
RangeIndex` with datetime64 bounds cannot be printed (`Unknown format code 'g'`)Có thể đã có người làm @d-chambers đã nhận 60 ngày trước. Đang mởbug
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 68/100
pydata/xarray#11598 · 3 bình luận ·
Maintainer thường phản hồi trong vòng 1 ngày
-
DataTree constructor error message says dict even though dict is not acceptedCó thể đã có người làm @aryansk đã nhận 100 ngày trước. Đang mởbug contrib-good-first-issue topic-DataTree topic-error reporting
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 72/100
pydata/xarray#11514 · 2 bình luận ·
Maintainer thường phản hồi trong vòng 1 ngày
Tất cả issue của pydata/xarray
Issue tương tự
-
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 78/100
abetlen/llama-cpp-python#2424 ·
Maintainer thường phản hồi trong vòng 1 ngày
-
Bug IronPython Python 3
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 72/100
pyrevitlabs/pyRevit#4184 ·
Maintainer thường phản hồi trong vòng 1 ngày
-
CLAW (Agents & Orchestration)Đang mở
Độ khó 1/5 Dưới một giờ Mức phù hợp với người mới 74/100
jqueryscript/awesome-claude-code#1009 ·
-
tests
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 66/100
Maintainer thường phản hồi trong vòng 3 ngày
-
Độ khó 2/5 1-3 giờ Mức phù hợp với người mới 72/100
Maintainer thường phản hồi trong vòng 1 ngày