File

Issue chứa một bản phác thảo C++ được nhúng, nhưng không nêu tên tệp nào trong repository, bài kiểm thử nào hoặc thay đổi nào được yêu cầu. Trước tiên cần làm rõ vấn đề nào đang được báo cáo và vấn đề đó thuộc về tệp nào của dự án; chưa thể xác định điều kiện hoàn thành cho đến khi phạm vi dự kiến và hành vi mong đợi được nêu rõ.

#define BLYNK_TEMPLATE_ID "TMPL31iM8MY9P"
#define BLYNK_TEMPLATE_NAME "home cotrol"
#define BLYNK_AUTH_TOKEN "QOxacMhJ9hFRpei_laFTAL3N8EHBt8sQ"
#define BLYNK_PRINT Serial
#include <ESP8266WiFi.h>
#include <EEPROM.h>
#include <BlynkSimpleEsp8266_SSL.h>

#define led0 D0
#define led1 D1
#define led2 D2
#define led3 D3
#define led4 D4
#define led5 D5
#define led6 D6
#define led7 D7
#define led8 D8
#define wifihi D10
#define wifiLo D9

int load1=0;
int load2=0;
int load3=0;
int load4=0;
int load5=0;
int load6=0;
int load7=0;
int load8=0;

char auth[] = BLYNK_AUTH_TOKEN;

char ssid[] = "Jio4 AS";
char pass[] = "akbar392";

void setup()
{
EEPROM.begin(512);
Serial.begin(115200);

load1 = EEPROM.read(1);
load2 = EEPROM.read(2);
load3 = EEPROM.read(3);
load4 = EEPROM.read(4);
load5 = EEPROM.read(5);
load6 = EEPROM.read(6);
load7 = EEPROM.read(7);
load8 = EEPROM.read(8);

pinMode(led0, OUTPUT);
pinMode(led1, OUTPUT);
pinMode(led2, OUTPUT);
pinMode(led3, OUTPUT);
pinMode(led4, OUTPUT);
pinMode(led5, OUTPUT);
pinMode(led6, OUTPUT);
pinMode(led7, OUTPUT);
pinMode(led8, OUTPUT);
pinMode(wifihi, OUTPUT);
pinMode(wifiLo, OUTPUT);

updateLed();

Blynk.begin(auth, ssid, pass);

}

void loop()
{

if(WiFi.status() != WL_CONNECTED){
digitalWrite(wifihi,HIGH);
digitalWrite(wifiLo,LOW);

}  
else{
    digitalWrite(wifihi,LOW);
    digitalWrite(wifiLo,HIGH);
        
   } 

Blynk.run();

}

BLYNK_WRITE(V1){
int pinValue= param.asInt();

analogWrite(led0,pinValue);

Blynk.virtualWrite(V1, pinValue);
if(pinValue>260){
digitalWrite(led0, HIGH);

}    

if(pinValue<270){
digitalWrite(led1, LOW);

} 

if(pinValue>280){
 digitalWrite(led1, HIGH);
  digitalWrite(led0, LOW);  
  

   }

}

BLYNK_WRITE(V2){
load2 = param.asInt();
updateLed();
}
BLYNK_WRITE(V3){
load3 = param.asInt();
updateLed();
}

BLYNK_WRITE(V4){
load4 = param.asInt();
updateLed();
}
BLYNK_WRITE(V5){
load5 = param.asInt();
updateLed();
}

BLYNK_WRITE(V6){
load6 = param.asInt();
updateLed();
}
BLYNK_WRITE(V7){
load7 = param.asInt();
updateLed();
}

BLYNK_WRITE(V8){
load8 = param.asInt();
updateLed();
}

BLYNK_WRITE(V9){
load1 = param.asInt();
load2 = param.asInt();
load3 = param.asInt();
load4 = param.asInt();
load5 = param.asInt();
load6 = param.asInt();
load7 = param.asInt();
load8 = param.asInt();
updateLed();

}

BLYNK_WRITE(V10){
load1 = param.asInt();
updateLed();

}

BLYNK_WRITE(V11){
int value = param.asInt();
value ? digitalWrite(led2, HIGH) :
digitalWrite(led2, LOW);
}
BLYNK_WRITE(V12){
int value = param.asInt();
value ? digitalWrite(led3, HIGH) :
digitalWrite(led3, LOW);
}

BLYNK_WRITE(V13){
int value = param.asInt();
value ? digitalWrite(led4, HIGH) :
digitalWrite(led4, LOW);
}
BLYNK_WRITE(V14){
int value = param.asInt();
value ? digitalWrite(led5, HIGH) :
digitalWrite(led5, LOW);
}

BLYNK_WRITE(V15){
int value = param.asInt();
value ? digitalWrite(led6, HIGH) :
digitalWrite(led6, LOW);
}
BLYNK_WRITE(V16){
int value = param.asInt();
value ? digitalWrite(led7, HIGH) :
digitalWrite(led7, LOW);
}

BLYNK_WRITE(V17){
int value = param.asInt();
value ? digitalWrite(led8, HIGH) :
digitalWrite(led8, LOW);
}

BLYNK_WRITE(V18){
int value = param.asInt();
value ? digitalWrite(led1, HIGH) :
digitalWrite(led1, LOW);
value ? digitalWrite(led2, HIGH) :
digitalWrite(led2, LOW);
value ? digitalWrite(led3, HIGH) :
digitalWrite(led3, LOW);
value ? digitalWrite(led4, HIGH) :
digitalWrite(led4, LOW);
value ? digitalWrite(led5, HIGH) :
digitalWrite(led5, LOW);
value ? digitalWrite(led6, HIGH) :
digitalWrite(led6, LOW);
value ? digitalWrite(led7, HIGH) :
digitalWrite(led7, LOW);
value ? digitalWrite(led8, HIGH) :
digitalWrite(led8, LOW);
}

void updateLed(){

digitalWrite(led1, load1);

digitalWrite(led2, load2);
digitalWrite(led3, load3);
digitalWrite(led4, load4);
digitalWrite(led5, load5);
digitalWrite(led6, load6);
digitalWrite(led7, load7);
digitalWrite(led8, load8);
updateEEPROM();

}

void updateEEPROM(){

EEPROM.put(1, load1);

EEPROM.put(2, load2);
EEPROM.put(3, load3);
EEPROM.put(4, load4);
EEPROM.put(5, load5);
EEPROM.put(6, load6);
EEPROM.put
EEPROM.put();
EEPROM.commit();

}