merge-async accepts a GitHub App installation token, then fails with “Enqueuer is not authorized to merge”

Bắt đầu với endpoint REST merge-async đã được tài liệu hóa và các lệnh gửi yêu cầu và polling gh api được cung cấp, sau đó so sánh hành vi của installation-token với probe ủy quyền enqueuePullRequest. Được xem là hoàn tất khi xác nhận được contract được hỗ trợ và nhận được либо một lần enqueue thành công vào merge queue hoặc phản hồi 4xx ngay lập tức, có thể hành động; báo cáo không xác định tệp repository hay test nào.

Summary

The stack-specific asynchronous merge endpoint accepts a GitHub App installation access token, returns 202 / pending, and then fails in the background with:

Enqueuer is not authorized to merge

This happens even though:

• the installation includes the repository;
• the App has Contents: write;
• the response advertises X-Accepted-GitHub-Permissions: contents=write;
• the App also has Merge queues: write and Pull requests: write; and
• the same installation token passes the authorization check for the ordinary GraphQL enqueuePullRequest mutation.

The REST documentation says that merge-async supports GitHub App installation access tokens and requires Contents: write. The request therefore appears to pass the documented endpoint-level authorization, then fail a second, user-role-oriented authorization check in the asynchronous stack worker.

Environment

• GitHub.com native stacked pull requests, public preview
• Direct REST API calls; this does not depend on a gh-stack client-side code path
• Five-PR stack targeting a trunk branch protected by a merge queue
• All five PRs were open, non-draft, approved, and MERGEABLE
• All required status contexts were green
• One lower PR had an unrelated non-required failed check and therefore reported UNSTABLE; the required contexts were green. The terminal API error was authorization-specific, not a repository-rule error.
• The top PR's ordinary mergeStateStatus was BLOCKED by its unmerged stack dependencies; the stack-specific endpoint is expected to merge the contiguous stack from the bottom up.
• Authentication: fresh GitHub App installation access token for hmnd-alphaclaw[bot]
• Relevant installation permissions:
  • contents: write
  • merge_queues: write
  • pull_requests: write
  • actions: write
  • workflows: write
• The repository is included in the installation's repository selection.
• Under the installation token, GraphQL repository.viewerPermission is null. GitHub's App documentation says installation-token requests depend on App permissions rather than a human repository role, so this should not remove the documented endpoint access.

The affected repository is private. Repository and PR identifiers are omitted from this public report, but the request UUID and timestamps below should allow GitHub staff to correlate the server-side job. Full identifiers can be provided privately through GitHub Support.

Reproduction

Use a GitHub App installation token as GH_TOKEN. The installation must include the repository and grant at least Contents: write.

Create a native stack whose PRs satisfy the target branch's required reviews and checks, then request a merge of the top PR through the merge queue:

owner='<owner>'
repo='<repo>'
pull_number='<top-pr-number>'
head_sha='<current-top-pr-head-sha>'

submit="$(gh api -X PUT \
  -H 'Accept: application/vnd.github+json' \
  -H 'X-GitHub-Api-Version: 2022-11-28' \
  "repos/$owner/$repo/pulls/$pull_number/merge-async" \
  -f sha="$head_sha" \
  -f merge_action=merge_queue)"

printf '%s\n' "$submit" | jq .
uuid="$(printf '%s\n' "$submit" | jq -r '.details.uuid')"

# Poll the asynchronous result.
gh api \
  -H 'Accept: application/vnd.github+json' \
  -H 'X-GitHub-Api-Version: 2022-11-28' \
  "repos/$owner/$repo/pulls/$pull_number/merge-async/$uuid" | jq .

Actual result

Submission at 2026-09-04T22:32:25Z returned:

{
  "status": "pending",
  "details": {
    "message": "Merge request enqueued.",
    "uuid": "5fccdf27-0e4c-4a11-8a7e-520f3097dfd3",
    "merge_method": "default",
    "merge_action": "merge_queue",
    "expected_head_sha": "<current-top-pr-head-sha>"
  }
}

Polling at 2026-09-04T22:36:40Z returned:

{
  "status": "failed",
  "details": {
    "message": "Enqueuer is not authorized to merge"
  }
}

No pull request was merged or added to the merge queue. All five PRs remained open.

Expected result

Because the endpoint documentation explicitly supports GitHub App installation access tokens and requires Contents: write, one of these should happen:

1. the stack is added to the merge queue; or
2. if installation actors are not actually supported for merge_action=merge_queue, the initial request fails synchronously with a documented 4xx response that identifies the missing requirement.

Returning 202 with "Merge request enqueued." and only later rejecting the actor contradicts the documented token/permission contract and makes submission look successful until the UUID is polled.

Authorization control

To separate ordinary merge-queue permission from stack-specific behavior, the same fresh installation token was used for a deliberately non-mutating GraphQL probe:

• call enqueuePullRequest on an ordinary PR;
• supply an intentionally incorrect expectedHeadOid;
• observe expected head oid does not match the current head oid, rather than an authorization error; and
• confirm mergeQueueEntry remains null.

This proves the mutation reached the expected-head validation after authorization without changing queue state. Before Merge queues: write was granted, the same mutation failed at authorization. After it was granted and a fresh token was minted, authorization passed—but the native stack worker still produced the terminal error above.

Documented contract

GitHub's REST documentation for Merge a pull request asynchronously states that:

• this is the required method for stacked PRs;
• GitHub App installation access tokens are supported;
• the required fine-grained permission is Contents: write; and
• branch protection and repository rules are not evaluated when the initial request is accepted, only later in the background job.

GitHub's GitHub App permissions documentation also says:

The success of an API request with an installation access token only depends on the app's permissions.

A human repository role is therefore not documented as an additional requirement for this token type.

Why this looks server-side

The request passes all observable front-door checks:

• supported token type;
• repository included in the installation;
• documented Contents: write permission present;
• accepted-permissions response header matches that permission;
• current head SHA supplied; and
• initial request accepted as pending.

The failure appears only when the asynchronous worker evaluates the enqueuer. One possible explanation is that the worker checks a human-style repository role for the App actor, sees viewerPermission: null, and rejects it instead of evaluating installation repository access plus App permissions. That is only a hypothesis; GitHub will need to confirm the actual backend path.

Requested fix / clarification

1. Confirm whether GitHub App installation access tokens are supported for merge-async when merge_action=merge_queue, as the REST documentation currently states.
2. If supported, authorize the asynchronous enqueuer using installation repository access and the documented App permissions rather than requiring a human repository role.
3. If unsupported, update the documentation and reject the initial request synchronously with an actionable 4xx error.
4. Do not return "Merge request enqueued." before the worker has established that the actor can enqueue it, or make the provisional nature unmistakable.
5. Document what repository.viewerPermission: null means for installation actors and ensure it is not treated as “no repository access” by stack workers.
6. Add an integration test covering an installation token with Contents: write and merge_action=merge_queue.

Related issues (no exact duplicate found)

• #268 covered ordinary enqueue/auto-merge APIs rejecting stacks; the async stack route added in gh-stack v0.1.0 addressed that routing problem, not this worker authorization failure.
• #315 covers missing admin-bypass behavior in stack merges and reports other cases where merge-async accepts work it cannot complete.
• #323 covers stack merges failing despite approved, mergeable PRs, but does not report GitHub App installation-token authorization.

Searches of open and closed github/gh-stack issues found no report containing GitHub App, installation token, or the exact error Enqueuer is not authorized to merge.