Error when installing python-apt(or other software) in termux from android

Tái hiện lệnh được báo cáo apt install python-apt và lần theo lỗi đến libsecp256k1/autogen.sh của coincurve, nơi log báo autoreconf: not found. Issue không nêu tệp hoặc bài kiểm thử nào của repository, vì vậy trước tiên hãy xác định liệu repository này có sở hữu đường dẫn cài đặt đang bị lỗi hay không và xác định một tiêu chí chấp nhận dành riêng cho dự án, vượt ra ngoài việc cài đặt gói thành công.

Why I always get an error when installing everything?
For an example python-apt

~ $ apt install python-apt
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following packages were automatically installed and are no longer required: libmaxminddb libssh
Use 'apt autoremove' to remove them.
The following NEW packages will be installed:
python-apt 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed.
Need to get 205 kB of archives.
After this operation, 1118 kB of additional disk space will be used.
Get:1 https://grimler.se/termux-packages-24 stable/main aarch64 python-apt aarch64 2.3.0 [205 kB]
Fetched 205 kB in 2s (85.2 kB/s)
Selecting previously unselected package python-apt.
(Reading database ... 105720 files and directories currently installed.)
Preparing to unpack .../python-apt_2.3.0_aarch64.deb ...
Unpacking python-apt (2.3.0) ... Setting up python-apt (2.3.0) ...
Setting up zeronet (0.7.1-8) ... Installing Python module: gevent...
Requirement already satisfied: gevent in /data/data/com.termux/files/usr/lib/python3.10/site-packages (21.12.0) Requirement already satisfied: zope.event in /data/data/com.termux/files/usr/lib/python3.10/site-packages (from gevent) (4.5.0)
Requirement already satisfied: greenlet<2.0,>=1.1.0 in /data/data/com.termux/files/usr/lib/python3.10/site-packages (from gevent) (1.1.2) Requirement already satisfied: setuptools in /data/data/com.termux/files/usr/lib/python3.10/site-packages (from gevent) (58.1.0)
Requirement already satisfied: zope.interface in /data/data/com.termux/files/usr/lib/python3.10/site-packages (from gevent) (5.4.0)
Installing Python module: msgpack...
Requirement already satisfied: msgpack in /data/data/com.termux/files/usr/lib/python3.10/site-packages (1.0.4)
Installing Python module: base58...
Requirement already satisfied: base58 in /data/data/com.termux/files/usr/lib/python3.10/site-packages (2.1.1)
Installing Python module: merkletools...
Requirement already satisfied: merkletools in /data/data/com.termux/files/usr/lib/python3.10/site-packages (1.0.3) Requirement already satisfied: pysha3>=1.0b1 in /data/data/com.termux/files/usr/lib/python3.10/site-packages (from merkletools) (1.0.2) Installing Python module: rsa...
Requirement already satisfied: rsa in /data/data/com.termux/files/usr/lib/python3.10/site-packages (4.8)
Requirement already satisfied: pyasn1>=0.1.3 in /data/data/com.termux/files/usr/lib/python3.10/site-packages (from rsa) (0.4.8)
Installing Python module: PySocks... Requirement already satisfied: PySocks in /data/data/com.termux/files/usr/lib/python3.10/site-packages (1.7.1)
Installing Python module: pyasn1... Requirement already satisfied: pyasn1 in /data/data/com.termux/files/usr/lib/python3.10/site-packages (0.4.8)
Installing Python module: websocket_client...
Requirement already satisfied: websocket_client in /data/data/com.termux/files/usr/lib/python3.10/site-packages (1.3.2)
Installing Python module: gevent-websocket... Requirement already satisfied: gevent-websocket in /data/data/com.termux/files/usr/lib/python3.10/site-packages (0.10.1) Requirement already satisfied: gevent in /data/data/com.termux/files/usr/lib/python3.10/site-packages (from gevent-websocket) (21.12.0)
Requirement already satisfied: zope.event in /data/data/com.termux/files/usr/lib/python3.10/site-packages (from gevent->gevent-websocket) (4.5.0)
Requirement already satisfied: setuptools in /data/data/com.termux/files/usr/lib/python3.10/site-packages (from gevent->gevent-websocket) (58.1.0)
Requirement already satisfied: zope.interface in /data/data/com.termux/files/usr/lib/python3.10/site-packages (from gevent->gevent-websocket) (5.4.0)
Requirement already satisfied: greenlet<2.0,>=1.1.0 in /data/data/com.termux/files/usr/lib/python3.10/site-packages (from gevent->gevent-websocket) (1.1.2)
Installing Python module: bencode.py...
Requirement already satisfied: bencode.py in /data/data/com.termux/files/usr/lib/python3.10/site-packages (4.0.0)
Installing Python module: coincurve...
Collecting coincurve Using cached coincurve-17.0.0.tar.gz (2.5 MB)
Installing build dependencies ... done
Getting requirements to build wheel ... done
Installing backend dependencies ... done
Preparing metadata (pyproject.toml) ... done
Collecting asn1crypto
Using cached asn1crypto-1.5.1-py2.py3-none-any.whl (105 kB)
Collecting cffi>=1.3.0
Using cached cffi-1.15.0-cp310-cp310-linux_aarch64.whl
Collecting pycparser Using cached pycparser-2.21-py2.py3-none-any.whl (118 kB)
Building wheels for collected packages: coincurve
Building wheel for coincurve (pyproject.toml) ... error
error: subprocess-exited-with-error
× Building wheel for coincurve (pyproject.toml) did not run successfully.
│ exit code: 1
╰─> [69 lines of output]
running bdist_wheel
running build
running build_py
creating build
creating build/lib.linux-aarch64-cpython-310
creating build/lib.linux-aarch64-cpython-310/coincurve copying coincurve/init.py -> build/lib.linux-aarch64-cpython-310/coincurve
copying coincurve/_windows_libsecp256k1.py -> build/lib.linux-aarch64-cpython-310/coincurve
copying coincurve/context.py -> build/lib.linux-aarch64-cpython-310/coincurve
copying coincurve/ecdsa.py -> build/lib.linux-aarch64-cpython-310/coincurve
copying coincurve/flags.py -> build/lib.linux-aarch64-cpython-310/coincurve
copying coincurve/keys.py -> build/lib.linux-aarch64-cpython-310/coincurve
copying coincurve/types.py -> build/lib.linux-aarch64-cpython-310/coincurve
copying coincurve/utils.py -> build/lib.linux-aarch64-cpython-310/coincurve
copying coincurve/py.typed -> build/lib.linux-aarch64-cpython-310/coincurve
running build_clib
/data/data/com.termux/files/usr/tmp/pip-install-ey_gvd7g/coincurve_9ad483d313a34c59b8882aa99ae5e80c/libsecp256k1/autogen.sh: 3: autoreconf: not found
Traceback (most recent call last):
File "/data/data/com.termux/files/usr/lib/python3.10/site-packages/pip/_vendor/pep517/in_process/_in_process.py", line 363, in
main()
File "/data/data/com.termux/files/usr/lib/python3.10/site-packages/pip/_vendor/pep517/in_process/_in_process.py", line 345, in main
json_out['return_val'] = hook(**hook_input['kwargs'])
File "/data/data/com.termux/files/usr/lib/python3.10/site-packages/pip/_vendor/pep517/in_process/_in_process.py", line 261, in build_wheel
return _build_backend().build_wheel(wheel_directory, config_settings,
File "/data/data/com.termux/files/usr/tmp/pip-build-env-th0aafzx/overlay/lib/python3.10/site-packages/setuptools/build_meta.py", line 244, in build_wheel return self._build_with_temp_dir(['bdist_wheel'], '.whl',
File "/data/data/com.termux/files/usr/tmp/pip-build-env-th0aafzx/overlay/lib/python3.10/site-packages/setuptools/build_meta.py", line 229, in _build_with_temp_dir
self.run_setup() File "/data/data/com.termux/files/usr/tmp/pip-build-env-th0aafzx/overlay/lib/python3.10/site-packages/setuptools/build_meta.py", line 281, in run_setup
super(_BuildMetaLegacyBackend,
File "/data/data/com.termux/files/usr/tmp/pip-build-env-th0aafzx/overlay/lib/python3.10/site-packages/setuptools/build_meta.py", line 174, in run_setup
exec(compile(code, file, 'exec'), locals())
File "setup.py", line 264, in
setup(
File "/data/data/com.termux/files/usr/tmp/pip-build-env-th0aafzx/overlay/lib/python3.10/site-packages/setuptools/init.py", line 87, in setup
return distutils.core.setup(**attrs)
File "/data/data/com.termux/files/usr/tmp/pip-build-env-th0aafzx/overlay/lib/python3.10/site-packages/setuptools/_distutils/core.py", line 148, in setup
return run_commands(dist)
File "/data/data/com.termux/files/usr/tmp/pip-build-env-th0aafzx/overlay/lib/python3.10/site-packages/setuptools/_distutils/core.py", line 163, in run_commands dist.run_commands()
File "/data/data/com.termux/files/usr/tmp/pip-build-env-th0aafzx/overlay/lib/python3.10/site-packages/setuptools/_distutils/dist.py", line 967, in run_commands
self.run_command(cmd)
File "/data/data/com.termux/files/usr/tmp/pip-build-env-th0aafzx/overlay/lib/python3.10/site-packages/setuptools/dist.py", line 1229, in run_command
super().run_command(command)
File "/data/data/com.termux/files/usr/tmp/pip-build-env-th0aafzx/overlay/lib/python3.10/site-packages/setuptools/_distutils/dist.py", line 986, in run_command cmd_obj.run()
File "setup.py", line 97, in run
_bdist_wheel.run(self)
File "/data/data/com.termux/files/usr/tmp/pip-build-env-th0aafzx/overlay/lib/python3.10/site-packages/wheel/bdist_wheel.py", line 299, in run
self.run_command('build')
File "/data/data/com.termux/files/usr/tmp/pip-build-env-th0aafzx/overlay/lib/python3.10/site-packages/setuptools/_distutils/cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "/data/data/com.termux/files/usr/tmp/pip-build-env-th0aafzx/overlay/lib/python3.10/site-packages/setuptools/dist.py", line 1229, in run_command super().run_command(command)
File "/data/data/com.termux/files/usr/tmp/pip-build-env-th0aafzx/overlay/lib/python3.10/site-packages/setuptools/_distutils/dist.py", line 986, in run_command
cmd_obj.run()
File "/data/data/com.termux/files/usr/tmp/pip-build-env-th0aafzx/overlay/lib/python3.10/site-packages/setuptools/_distutils/command/build.py", line 136, in run
self.run_command(cmd_name)
File "/data/data/com.termux/files/usr/tmp/pip-build-env-th0aafzx/overlay/lib/python3.10/site-packages/setuptools/_distutils/cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "/data/data/com.termux/files/usr/tmp/pip-build-env-th0aafzx/overlay/lib/python3.10/site-packages/setuptools/dist.py", line 1229, in run_command
super().run_command(command) File "/data/data/com.termux/files/usr/tmp/pip-build-env-th0aafzx/overlay/lib/python3.10/site-packages/setuptools/_distutils/dist.py", line 986, in run_command
cmd_obj.run()
File "setup.py", line 154, in run
subprocess.check_call([autogen], cwd=absolute('libsecp256k1'))
File "/data/data/com.termux/files/usr/lib/python3.10/subprocess.py", line 369, in check_call raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['/data/data/com.termux/files/usr/tmp/pip-install-ey_gvd7g/coincurve_9ad483d313a34c59b8882aa99ae5e80c/libsecp256k1/autogen.sh']' returned non-zero exit status 127.
[end of output]

note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for coincurve
Failed to build coincurve
ERROR: Could not build wheels for coincurve, which is required to install pyproject.toml-based projects
Retrying installation of coincurve...
Collecting coincurve
Using cached coincurve-17.0.0.tar.gz (2.5 MB)
Installing build dependencies ... done
Getting requirements to build wheel ... done
Installing backend dependencies ... done
Preparing metadata (pyproject.toml) ... done
Collecting asn1crypto Using cached asn1crypto-1.5.1-py2.py3-none-any.whl (105 kB)
Collecting cffi>=1.3.0
Using cached cffi-1.15.0-cp310-cp310-linux_aarch64.whl Collecting pycparser Using cached pycparser-2.21-py2.py3-none-any.whl (118 kB)
Building wheels for collected packages: coincurve
Building wheel for coincurve (pyproject.toml) ... error
error: subprocess-exited-with-error

× Building wheel for coincurve (pyproject.toml) did not run successfully.
│ exit code: 1
╰─> [69 lines of output]
running bdist_wheel
running build
running build_py
creating build
creating build/lib.linux-aarch64-cpython-310
creating build/lib.linux-aarch64-cpython-310/coincurve
copying coincurve/init.py -> build/lib.linux-aarch64-cpython-310/coincurve copying coincurve/_windows_libsecp256k1.py -> build/lib.linux-aarch64-cpython-310/coincurve
copying coincurve/context.py -> build/lib.linux-aarch64-cpython-310/coincurve
copying coincurve/ecdsa.py -> build/lib.linux-aarch64-cpython-310/coincurve
copying coincurve/flags.py -> build/lib.linux-aarch64-cpython-310/coincurve
copying coincurve/keys.py -> build/lib.linux-aarch64-cpython-310/coincurve
copying coincurve/types.py -> build/lib.linux-aarch64-cpython-310/coincurve
copying coincurve/utils.py -> build/lib.linux-aarch64-cpython-310/coincurve
copying coincurve/py.typed -> build/lib.linux-aarch64-cpython-310/coincurve
running build_clib
/data/data/com.termux/files/usr/tmp/pip-install-f87csmrq/coincurve_67e21ff6a4f54121b25a230ee86908d5/libsecp256k1/autogen.sh: 3: autoreconf: not found
Traceback (most recent call last):
File "/data/data/com.termux/files/usr/lib/python3.10/site-packages/pip/_vendor/pep517/in_process/in_process.py", line 363, in
main()
File "/data/data/com.termux/files/usr/lib/python3.10/site-packages/pip/vendor/pep517/in_process/in_process.py", line 345, in main
json_out['return_val'] = hook(**hook_input['kwargs'])
File "/data/data/com.termux/files/usr/lib/python3.10/site-packages/pip/vendor/pep517/in_process/in_process.py", line 261, in build_wheel
return build_backend().build_wheel(wheel_directory, config_settings,
File "/data/data/com.termux/files/usr/tmp/pip-build-env-6q9jimy/overlay/lib/python3.10/site-packages/setuptools/build_meta.py", line 244, in build_wheel
return self.build_with_temp_dir(['bdist_wheel'], '.whl',
File "/data/data/com.termux/files/usr/tmp/pip-build-env-6q9jimy/overlay/lib/python3.10/site-packages/setuptools/build_meta.py", line 229, in build_with_temp_dir
self.run_setup()
File "/data/data/com.termux/files/usr/tmp/pip-build-env-6q9jimy/overlay/lib/python3.10/site-packages/setuptools/build_meta.py", line 281, in run_setup
super(BuildMetaLegacyBackend,
File "/data/data/com.termux/files/usr/tmp/pip-build-env-6q9jimy/overlay/lib/python3.10/site-packages/setuptools/build_meta.py", line 174, in run_setup
exec(compile(code, file, 'exec'), locals()) File "setup.py", line 264, in
setup(
File "/data/data/com.termux/files/usr/tmp/pip-build-env-6q9jimy/overlay/lib/python3.10/site-packages/setuptools/init.py", line 87, in setup
return distutils.core.setup(**attrs) File "/data/data/com.termux/files/usr/tmp/pip-build-env-6q9jimy/overlay/lib/python3.10/site-packages/setuptools/distutils/core.py", line 148, in setup
return run_commands(dist)
File "/data/data/com.termux/files/usr/tmp/pip-build-env-6q9jimy/overlay/lib/python3.10/site-packages/setuptools/distutils/core.py", line 163, in run_commands
dist.run_commands() File "/data/data/com.termux/files/usr/tmp/pip-build-env-6q9jimy/overlay/lib/python3.10/site-packages/setuptools/distutils/dist.py", line 967, in run_commands
self.run_command(cmd)
File "/data/data/com.termux/files/usr/tmp/pip-build-env-6q9jimy/overlay/lib/python3.10/site-packages/setuptools/dist.py", line 1229, in run_command super().run_command(command)
File "/data/data/com.termux/files/usr/tmp/pip-build-env-6q9jimy/overlay/lib/python3.10/site-packages/setuptools/distutils/dist.py", line 986, in run_command cmd_obj.run()
File "setup.py", line 97, in run bdist_wheel.run(self)
File "/data/data/com.termux/files/usr/tmp/pip-build-env-6q9jimy/overlay/lib/python3.10/site-packages/wheel/bdist_wheel.py", line 299, in run
self.run_command('build') File "/data/data/com.termux/files/usr/tmp/pip-build-env-6q9jimy/overlay/lib/python3.10/site-packages/setuptools/distutils/cmd.py", line 313, in run_command self.distribution.run_command(command)
File "/data/data/com.termux/files/usr/tmp/pip-build-env-6q9jimy/overlay/lib/python3.10/site-packages/setuptools/dist.py", line 1229, in run_command
super().run_command(command)
File "/data/data/com.termux/files/usr/tmp/pip-build-env-6q9jimy/overlay/lib/python3.10/site-packages/setuptools/distutils/dist.py", line 986, in run_command
cmd_obj.run() File "/data/data/com.termux/files/usr/tmp/pip-build-env-6q9jimy/overlay/lib/python3.10/site-packages/setuptools/distutils/command/build.py", line 136, in run
self.run_command(cmd_name)
File "/data/data/com.termux/files/usr/tmp/pip-build-env-6q9jimy/overlay/lib/python3.10/site-packages/setuptools/distutils/cmd.py", line 313, in run_command
self.distribution.run_command(command) File "/data/data/com.termux/files/usr/tmp/pip-build-env-6q9jimy/overlay/lib/python3.10/site-packages/setuptools/dist.py", line 1229, in run_command
super().run_command(command)
File "/data/data/com.termux/files/usr/tmp/pip-build-env-6q9jimy/overlay/lib/python3.10/site-packages/setuptools/_distutils/dist.py", line 986, in run_command
cmd_obj.run() File "setup.py", line 154, in run
subprocess.check_call([autogen], cwd=absolute('libsecp256k1'))
File "/data/data/com.termux/files/usr/lib/python3.10/subprocess.py", line 369, in check_call
raise CalledProcessError(retcode, cmd) subprocess.CalledProcessError: Command '['/data/data/com.termux/files/usr/tmp/pip-install-f87csmrq/coincurve_67e21ff6a4f54121b25a230ee86908d5/libsecp256k1/autogen.sh']' returned non-zero exit status 127. [end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for coincurve
Failed to build coincurve ERROR: Could not build wheels for coincurve, which is required to install pyproject.toml-based projects Failed to install coincurve.
dpkg: error processing package zeronet (--configure):
installed zeronet package post-installation script subprocess returned error exit status 1 Errors were encountered while processing:
zeronet E: Sub-process /data/data/com.termux/files/usr/bin/dpkg returned an error code (1)

Please,if anyone know how to fix the problem