SettingsBackport + MergeSettings: a backported hook edit makes the overlay own `hooks`, and the next SessionStart merge drops every hook it does not list

Đang mở
#2,820 2 bình luận 0 reaction 0 người được giao Xem trên GitHub

Maintainer thường phản hồi trong vòng 5 ngày

Chưa có ai nhận issue này.

Đánh giá

Độ khó
5/5
Thời gian dự kiến
Hơn một tuần
Mức phù hợp với người mới
15/100
Loại issue
Lỗi
Độ rõ ràng
Khá rõ ràng
Mức độ hoạt động
Sôi nổi
Công nghệ
typescript

Hướng nghiên cứu

Start by reading SettingsBackport.ts and MergeSettings.ts, especially INSTALLER_OWNED_KEYS and the mergeSettings annotation handling. Reproduce the loss in a throwaway CLAUDE_CONFIG_DIR using the SessionStart command, then verify that all three hook events survive backport plus merge. Done means a hook edit no longer lets the overlay own hooks, unknown flags are rejected, and the merge either preserves registrations or refuses explicitly with --allow-hook-drop.

Do mô hình lập chỉ mục viết ra từ nội dung của issue.

Mô tả

The SessionStart hook runs SettingsBackport.ts; MergeSettings.ts --system … --user … --output settings.json. v8.761.0's settings.system.json ships no hooks key, and hooks is in MergeSettings.ts INSTALLER_OWNED_KEYS: mergeSettingsPreserving carries it from the existing settings.json only while neither layer defines it.

1. Silent hook loss (most serious). SettingsBackport.ts never consults INSTALLER_OWNED_KEYS. When anything edits part of live hooks, the backport writes that part into USER/CONFIG/settings.user.json, and from then on the overlay owns hooks. If the edit changes a group (a timeout, say), the drift counts as one element removed and one added, so it is backported as a whole array. That array verifies, and the next merge writes a settings.json holding only the backported event. Every other hook event is gone, and nothing reports the dropped events: the backport only warns that the one array is now pinned.

Repro, in a throwaway CLAUDE_CONFIG_DIR:

  • the system layer has no hooks;
  • the overlay is {"model":"x"};
  • the snapshot and live settings.json carry SessionStart, PreToolUse and Stop;
  • change one PreToolUse hook's timeout in live;
  • run SettingsBackport, then MergeSettings.

Expected: all three events in the output. Actual: only PreToolUse.

A tool that re-registers its own hooks at startup by removing its groups and appending them again (which moves them to the end) is enough to trigger the reorder form, § 2 below.

2. Nested annotations never resolve, so the chain wedges. This part is #2636 (and #2737), both closed as fixed for the next release; it is kept here because § 1 depends on it. In mergeSettings, a user key that the system layer lacks recurses as mergeSettings(undefined, user[key]). A plain object then falls through to cloneJsonValue(user), and any __merge annotation inside is copied out raw:

mergeSettings({}, { hooks: { X: { __merge: "append", values: [1] } } })
// → { hooks: { X: { __merge: "append", values: [1] } } }   expected { hooks: { X: [1] } }

__merge: "remove" leaks the same way. The control is the same overlay merged against a system layer that has hooks: {}: it resolves to { hooks: { X: [1] } }.

In the chain:

  • A reorder of live hook groups backports as append annotations, so SettingsBackport's verification fails, MergeSettings refuses to write ("backporting its hand edits failed"), and the merge snapshot never refreshes. Every later session start repeats it.
  • Adding one spinner tip does the same, because the system layer has no spinnerTipsOverride, so the backport appends onto a parent the merge cannot resolve.

Refusing is the safe outcome here, but it hides § 1. Fixing § 2 first, on an install whose overlay already holds a captured partial hooks, turns the wedge into the loss in § 1. That is the order the #2636 fix puts installs in: once it reaches them, a wedged chain stops refusing and the next session start writes settings.json with only the hooks the overlay captured. Shipping § 1's guard (fix 1 or 2 below) in the same release as the #2636 fix avoids that.

3. Smaller defects in the same chain.

  • SettingsBackport writes settings.user.json before it verifies, and does not roll back a failed non-deletion change.
  • permissions arrays are planned as sets (ORDER_FREE_ROOTS) but verified in order, so a reordered allow list plus one new rule plans an append that then fails verification.
  • An array drift onto a non-array system value plans an append, and the merge throws __merge: "append" requires the system value to be an array or absent.
  • Verification compares the merge with the live file, so a permission the system layer added since the last snapshot, together with one added live in the same window, makes a correct append fail verification (system ["Read","Bash"], snapshot ["Read"], live ["Read","Write"]). The chain then refuses again on every later session start.
  • SettingsBackport ignores flags it does not know: SettingsBackport.ts --help runs a real backport, and writes the overlay if there is drift. Only --dry-run is recognised.

A possible fix.

  1. SettingsBackport drops drift under any INSTALLER_OWNED_KEYS entry that neither layer defines. The merge already carries those keys from live, so a hand edit survives without a backport.
  2. MergeSettings --output refuses to write while the merge would remove any hook registration that the existing settings.json has, unless --allow-hook-drop is passed. A registration is counted with multiplicity and keyed by event, matcher, and the hook record apart from timeout. Keying on event + command alone misses a removed matcher group whose command still runs under another matcher. This catches § 1 whatever the cause, including a future settings.system.json that starts shipping hooks.
  3. SettingsBackport appends only when the system layer has the array's parent object and the leaf is an array or absent, and otherwise writes the array whole. Order-free roots verify as sets.
  4. With 1-3 in place, fixing § 2 is safe. Rejecting unknown flags fixes the last bullet of § 3.

Related. #2636 and #2737 (§ 2, closed); #2736 (SettingsBackport refuses on a missing system key, the same wedge from another trigger); #2759 (a fresh install's first merge drops all hooks, because InstallAll writes them into settings.json only). § 1 is a different path to the same loss as #2759: it needs no fresh install, only one backported hook edit.

Ngôn ngữ chính
TypeScript
Star
19.9k
Fork
2.5k
Chỉ số merge pull request
Không có pull request nào được merge trong 30 ngày

Chuẩn bị môi trường

Dự án này không cung cấp dev container, Dockerfile hay hướng dẫn đóng góp, nên bạn cần tự thiết lập môi trường: hãy bắt đầu từ README và xem hướng dẫn đóng góp lần đầu của chúng tôi để biết các bước chung.

Bắt đầu từ đâu

  1. Đọc hết issue, rồi đọc hướng dẫn đóng góp của dự án.
  2. Bình luận trên issue rằng bạn sẽ nhận — tránh hai người làm cùng một việc.
  3. Fork repository và làm thay đổi trên một nhánh.
  4. Mở pull request có tham chiếu số hiệu của issue.

Issue khác của danielmiessler/LifeOS

Tất cả issue của danielmiessler/LifeOS

Issue tương tự

Thêm issue về TypeScript

Nhận issue mới trong hộp thư của bạn

Bản tóm tắt ngắn những issue GitHub phù hợp với người mới.