Steam Frame: Wireless Adapter "Paired, but could not connect" after Windows restart (WlanConnect error 1168)

Đang mở
  • Có gì không ổn?
#3,045 0 bình luận 0 reaction 0 người được giao Xem trên GitHub

Chưa có ai nhận issue này.

Đánh giá

Độ khó
4/5
Thời gian dự kiến
3-5 ngày
Mức phù hợp với người mới
42/100
Loại issue
Lỗi
Độ rõ ràng
Khá rõ ràng
Mức độ hoạt động
Sôi nổi
Công nghệ
networking
Lĩnh vực
networking

Hướng nghiên cứu

Start by reviewing the PC's remote_connections.txt entries around the Realtek driver initialization, repeated connection timeouts, and WlanConnect error 1168. Compare behavior with the onboard RZ616 Wi-Fi adapter enabled and disabled, since the reporter could not identify which of several changes restored the connection. Done means identifying why the headset fails to connect after a Windows restart and confirming a reliable fix across restarts.

Do mô hình lập chỉ mục viết ra từ nội dung của issue.

Mô tả

Your system information
  • Steam client version: 1792618285 (PC, beta)
  • SteamOS version: 0.4.5
  • Opted into Steam client beta?: Yes (PC)
  • Opted into SteamOS beta?: No
  • Have you checked for updates in Settings > System?: Yes
  • Host PC: Windows 11 64-bit, MSI MS-7D75, AMD Ryzen 7 7800X3D, NVIDIA RTX 5080 (driver 32.0.16.2114), 32 GB RAM, SteamVR 2.18.4
  • Steam ID: 76561198179305869
  • System report submitted from the headset: Yes
Please describe your issue in as much detail as possible:

Expected: The Steam Frame connects to the included Wireless Adapter after pairing, and PC VR streaming via SteamVR works.

What happens: Pairing succeeds, but the headset never connects to the adapter.
Steam on the PC shows: "Paired, but the Steam Frame could not connect to the Wireless Adapter".
The headset shows the adapter as detected, then stuck on "Waiting...".
SteamVR stays on "Awaiting Wireless Connection", the headset shows "SteamVR not ready".

It worked at first (PC VR incl. Half-Life: Alyx ran over the adapter). After a PC restart it stopped working. A fresh re-pair fixed it once, but it broke again after the next restart. Now re-pairing does not help anymore.

From remote_connections.txt on the PC:

  • Realtek driver initializes, "Dongle VR Mode Initialize Ok"
  • then repeated "Connect timeout event"
  • WlanConnect() fails with error 1168
  • "sent ssid frame_CA7F6F2D"
    The headset is found via broadcast, but the WLAN link between adapter and headset is never established.

Already tried:

  • Unpair/re-pair on PC and headset, toggled "Enable Streaming Adapter"
  • Clean SteamVR reinstall incl. resetting steamvr.vrsettings
  • Steam client and SteamVR beta
  • Different USB ports (rear motherboard USB 3.0, no hub)
  • Disabled Bluetooth PAN adapter (stopped a USB connect/disconnect loop, but did not fix the connection)
  • Windows Fast Startup disabled
  • Firewall rules for Steam, SteamVR and vrserver allowed (private + public)
  • Factory reset of the headset

Possibly related: a stale SSID on the headset side, as reported by another user who fixed a similar "Waiting..." state with softapcmd refresh via ADB.

Steps for reproducing this issue:
  1. Pair the Steam Frame with the Wireless Adapter (works, PC VR streaming works).
  2. Restart or shut down the Windows PC.
  3. Adapter is detected again, but the headset stays on "Waiting..." and Steam shows "Paired, but the Steam Frame could not connect to the Wireless Adapter". Re-pairing no longer fixes it.

Update: Got it working again.

What changed right before it worked:

  • Disabled the onboard Wi-Fi adapter of the motherboard ("RZ616 Wi-Fi 6E 160MHz", also 6 GHz capable) in Windows network connections
  • Re-plugged the Steam Frame Wireless Adapter into a different USB port
  • Clicked "Pair" again from Steam on the PC

After that the headset connected to the adapter and PC VR works again.

netsh wlan show interfaces showed both adapters ("Realtek 8832CU Wireless LAN WiFi 6 USB NIC For Valve" and the onboard RZ616), both disconnected, before the fix. Possibly the onboard 6E adapter interferes with or conflicts with the Steam Frame adapter. Not 100% sure which of the steps fixed it.

Will report back whether it survives a PC restart, since that is when it broke before.

Ngôn ngữ chính
Không có dữ liệu ngôn ngữ
Star
2.7k
Fork
89
Không có pull request nào được merge trong 30 ngày

Chuẩn bị môi trường

Dự án này không cung cấp dev container, Dockerfile hay hướng dẫn đóng góp, nên bạn cần tự thiết lập môi trường: hãy bắt đầu từ README và xem hướng dẫn đóng góp lần đầu của chúng tôi để biết các bước chung.

Bắt đầu từ đâu

  1. Đọc hết issue, rồi đọc hướng dẫn đóng góp của dự án.
  2. Bình luận trên issue rằng bạn sẽ nhận — tránh hai người làm cùng một việc.
  3. Fork repository và làm thay đổi trên một nhánh.
  4. Mở pull request có tham chiếu số hiệu của issue.

Issue khác của ValveSoftware/SteamOS

Tất cả issue của ValveSoftware/SteamOS

Issue tương tự

Thêm issue về Networking

Nhận issue mới trong hộp thư của bạn

Bản tóm tắt ngắn những issue GitHub phù hợp với người mới.