Steam Machine: Acer XB270H gets no EDID over DP, falls back to 640x480

Đang mở
#3,028 0 bình luận 0 reaction 0 người được giao Xem trên GitHub

Chưa có ai nhận issue này.

Đánh giá

Độ khó
4/5
Thời gian dự kiến
3-5 ngày
Mức phù hợp với người mới
15/100
Loại issue
Lỗi
Độ rõ ràng
Khá rõ ràng
Mức độ hoạt động
Sôi nổi
Công nghệ
linux
Lĩnh vực
operating-systems

Hướng nghiên cứu

The failure is in the DisplayPort EDID path: start by reading /sys/class/drm/card0-DP-1/edid (0 bytes) and /sys/class/drm/card0-DP-1/modes (only 640x480), then the debugfs override at /sys/kernel/debug/dri/0/DP-1/edid_override described in the linked workaround repo. Done means a reproducible diagnosis of why the sink returns no EDID over AUX, or a kernel-side fallback that gets the panel's native modes without manual overrides.

Do mô hình lập chỉ mục viết ra từ nội dung của issue.

Mô tả

Your system information
  • Steam client version: VERSION_ID=3.9.5
  • SteamOS version: VERSION_CODENAME=holo, KERNEL:7.2.7-valve2-2-neptune-72-g31504582a073
  • Opted into Steam client beta?: No
  • Opted into SteamOS beta?: No
  • Have you checked for updates in Settings > System?: Yes
Please describe your issue in as much detail as possible:

An Acer XB270H (hardware G-SYNC module, native 1920x1080 @ 144 Hz) connected
over DisplayPort is offered only 640x480. Expected: 1920x1080 with 60/100/120/144 Hz.

/sys/class/drm/card0-DP-1/edid is 0 bytes and modes lists a single 640x480
entry while status is connected. The same monitor reports a full EDID from an
NVIDIA host. The AI guess is "that the G-SYNC module NAKs DDC/EDID over AUX from non-NVIDIA sources, so the kernel gets no EDID and uses its no-EDID fallback."

Workaround, verified: writing the monitor's captured 256-byte EDID
hex
to /sys/kernel/debug/dri/0/DP-1/edid_override, then
echo on and echo detect to /sys/class/drm/card0-DP-1/status, gives
1920x1080 at 60/100/120/144 Hz. A boot-time oneshot unit that re-applies it
works in Game Mode at 144 Hz, across reboot and monitor sleep/wake
(not yet checked across a SteamOS update). So the kernel and gamescope handle the
mode fine once an EDID exists; the failure is isolated to the sink returning none.

Workaround repo: https://github.com/JasonEckardt/steamos-edid-fix

Steps for reproducing this issue:
  1. Connect an Acer XB270H to the Steam Machine's DisplayPort output.
  2. Boot, or hotplug the cable.
  3. Check Settings > Display, or cat /sys/class/drm/card0-DP-1/modes: only 640x480.
Ngôn ngữ chính
Không có dữ liệu ngôn ngữ
Star
2.7k
Fork
89
Chỉ số merge pull request
Không có pull request nào được merge trong 30 ngày

Chuẩn bị môi trường

Dự án này không cung cấp dev container, Dockerfile hay hướng dẫn đóng góp, nên bạn cần tự thiết lập môi trường: hãy bắt đầu từ README và xem hướng dẫn đóng góp lần đầu của chúng tôi để biết các bước chung.

Bắt đầu từ đâu

  1. Đọc hết issue, rồi đọc hướng dẫn đóng góp của dự án.
  2. Bình luận trên issue rằng bạn sẽ nhận — tránh hai người làm cùng một việc.
  3. Fork repository và làm thay đổi trên một nhánh.
  4. Mở pull request có tham chiếu số hiệu của issue.

Issue khác của ValveSoftware/SteamOS

Tất cả issue của ValveSoftware/SteamOS

Issue tương tự

Thêm issue về Operating Systems

Nhận issue mới trong hộp thư của bạn

Bản tóm tắt ngắn những issue GitHub phù hợp với người mới.