bcm2835-codec: encoder stops working after some time

Open
#7,675 14 comments 0 reactions 0 assignees View on GitHub

Maintainers usually reply within 1 day

Nobody has claimed this yet.

Assessment

Difficulty
5/5
Estimated time
Over a week
Newbie friendliness
32/100
Issue type
Bug
Clarity
Needs clarification
Activity status
Active
Tech stack
c, linux
Domain
embedded-iot

Research direction

Start from the dmesg strings: locate bcm2835_mmal_vchiq: timed out waiting for sync completion and vchiq_mmal_component_init: failed to create component in the MMAL/VCHIQ driver code, plus bcm2835_codec_create_component and bcm2835_codec_stop_streaming in the bcm2835-codec media driver. Trace how the sync-completion timeout leaves GPU-side resources or component handles unreleased across repeated start/stop cycles, and check error-path cleanup around -62 (ETIMEIMEOUT) failures. Done means identifying the leak or stuck state on repeated start/stop of ril.video_encode/ril.image_encode and confirming a reproduction path; the issue itself states reproduction is unknown, so this is maintainer-level kernel debugging rather than a startable first fix.

Written by the indexing model from the issue text.

Description

Describe the bug

PiKVM users report that sometimes after several restarts and successful operation sessions, JPEG encoder (image_encode) and H.264 (video_encode) stop initializing. It seems this is a bit similar to #7163

Dmesg:

[17056.541287] bcm2835_mmal_vchiq: timed out waiting for sync completion
[17056.547944] bcm2835-codec bcm2835-codec: bcm2835_codec_stop_streaming: Failed disabling i/p port, ret -62
[17059.613354] bcm2835_mmal_vchiq: timed out waiting for sync completion
[17059.619987] bcm2835-codec bcm2835-codec: bcm2835_codec_stop_streaming: Failed enabling component, ret -62
[17062.685429] bcm2835_mmal_vchiq: timed out waiting for sync completion
[17065.757505] bcm2835_mmal_vchiq: timed out waiting for sync completion
[94500.799477] bcm2835_mmal_vchiq: timed out waiting for sync completion
[94500.806073] bcm2835_mmal_vchiq: vchiq_mmal_component_init: failed to create component -62 (Not enough GPU mem?)
[94500.816710] bcm2835-codec bcm2835-codec: bcm2835_codec_create_component: failed to create component ril.video_encode
[108339.129068] bcm2835_mmal_vchiq: timed out waiting for sync completion
[108339.135924] bcm2835_mmal_vchiq: vchiq_mmal_component_init: failed to create component -62 (Not enough GPU mem?)
[108339.147743] bcm2835-codec bcm2835-codec: bcm2835_codec_create_component: failed to create component ril.video_encode
[108350.649267] bcm2835_mmal_vchiq: timed out waiting for sync completion
[108350.656703] bcm2835_mmal_vchiq: vchiq_mmal_component_init: failed to create component -62 (Not enough GPU mem?)
[108350.667764] bcm2835-codec bcm2835-codec: bcm2835_codec_create_component: failed to create component ril.video_encode
[109034.436851] bcm2835_mmal_vchiq: timed out waiting for sync completion
[109034.444505] bcm2835_mmal_vchiq: vchiq_mmal_component_init: failed to create component -62 (Not enough GPU mem?)
[109034.455702] bcm2835-codec bcm2835-codec: bcm2835_codec_create_component: failed to create component ril.video_encode

And (another user):

18:29:31  bcm2835_mmal_vchiq: timed out waiting for sync completion
18:29:31  vchiq_mmal_component_init: failed to create component -62
18:29:31  bcm2835-codec: failed to create component ril.image_encode
Steps to reproduce the behaviour

The exact method for reproducing is unknown, but it is said that this happens after several restarts of the process that initializes the M2M codec. Just run, stop and run again any encoder like gstreamer to capture and encode stream from tc358743 to h264, several times.

I can ask users to perform special diagnostics or provide SSH.

Device (s)

Raspberry Pi CM4

System
  • Arch Linux ARM
  • version 288930ab4712b99596f32732664aaaeb881ef1e0 (clean) (release) (start)
  • 6.12.105-2-rpi (built from 73b1c785241360882ab9f7fb0793e775c25db325)
Logs
[root@cobas-pure-box kvmd-webterm]# cat /boot/config.txt
# PiKVM
# See /boot/overlays/README for all available options
initramfs initramfs-linux.img followkernel

dtoverlay=cma,cma-192
hdmi_force_hotplug=1
gpu_mem=192
enable_uart=1
dtoverlay=disable-bt

# USB emulation
dtoverlay=dwc2,dr_mode=peripheral

# Video and audio
dtoverlay=tc358743,4lane=1
dtoverlay=tc358743-audio

# I2C (display)
dtparam=i2c_arm=on

# Clock
dtoverlay=i2c-rtc,pcf8563,wakeup-source

# Passthrough
dtoverlay=vc4-kms-v3d
disable_overscan=1
dtparam=ant2

[root@cobas-pure-box kvmd-webterm]# cat /boot/cmdline.txt
root=LABEL=PIROOT ro rootwait console=serial0,115200 console=tty1 fsck.repair=yes audit=0
Additional context

No response

Dominant language
C
Stars
13.3k
Forks
5.5k
Avg merge
4d 10h
Merged PRs (30d)
31

Getting set up

This project ships no dev container, Dockerfile or contributing guide, so setting up is up to you: start from its README, and see our first-contribution guide for the general steps.

First steps

  1. Read the whole issue, then the project's contributing guide.
  2. Comment on the issue to say you are picking it up — it saves two people doing the same work.
  3. Fork the repository and make your change on a branch.
  4. Open a pull request that references the issue number.

More from raspberrypi/linux

All issues in raspberrypi/linux

Similar issues

More C issues

Get new issues in your inbox

A short digest of beginner-friendly GitHub issues.