WPA3 SAE is not supported on Pi 400 (BCM43456)
Maintainers usually reply within 1 day
Nobody has claimed this yet.
Assessment
- Difficulty
- 4/5
- Estimated time
- 3-5 days
- Newbie friendliness
- 38/100
- Issue type
- Bug
- Clarity
- Needs clarification
- Activity status
- Active
- Tech stack
- c, linux
- Domain
- networking
Research direction
Start by examining the brcmfmac BCM43456 support and the brcm/brcmfmac43456-sdio firmware path, comparing them with the BCM43455 support referenced in the report. Reproduce the capability checks with iw phy and wpa_cli get_capability key_mgmt; done would be WPA3-Personal SAE being reported and usable on Raspberry Pi 400.
Written by the indexing model from the issue text.
Description
Describe the bug
WPA3-Personal SAE Wi-Fi standard doesn't seem to be supported by the firmware/driver of Raspberry Pi 400.
The 400 has BCM43456 module (brcm/brcmfmac43456-sdio firmware), compared to Pi 3B/4/5, which use SYM43455 (cypress/cyfmac43455-sdio firmware).
So far there were issues here and on forum, firmware and code updates from Infineon for 43455 only as far as I could see.
Raspberry Pi 400 on the latest official OS version does not report anything related to SAE in iw phy, as well as wpa_cli get_capability key_mgmt.
Connecting to WPA3-Personal Only networks on Raspberry Pi 400 does not work.
Steps to reproduce the behaviour
Try to connect to WPA3-Personal Only network using Rasberry Pi 400
Device (s)
Raspberry Pi 400
System
6.18.39+rpt-rpi-v8
Logs
$ dmesg | grep 4345
[ 8.809313] Bluetooth: hci0: BCM4345C5
[ 8.809321] Bluetooth: hci0: BCM4345C5 (003.006.006) build 0000
[ 8.938140] brcmfmac: F1 signature read @0x18000000=0x15294345
[ 8.941616] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9
[ 8.980155] Bluetooth: hci0: BCM4345C5 'brcm/BCM4345C5.raspberrypi,400.hcd' Patch
[ 9.212095] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/9 wl0: May 14 2020 17:26:08 version 7.84.17.1 (r871554) FWID 01-3d9e1d87
[ 9.714776] Bluetooth: hci0: BCM43456 37.4MHz Raspberry Pi BT5.0 [Version: 1052.1108]
[ 9.714782] Bluetooth: hci0: BCM4345C5 (003.006.006) build 1108
$ iw phy | grep -i sae || echo empty!
empty!
$ wpa_cli get_capability key_mgmt
NONE IEEE8021X WPA-EAP WPA-PSK WPA-EAP-SUITE-B OWE DPP FT-PSK FT-EAP
(no sae)
$ wpa_cli get_capability auth_alg
OPEN SHARED LEAP
(no sae)
- Dominant language
- C
- Stars
- 13.3k
- Forks
- 5.5k
- Avg merge
- 4d 10h
- Merged PRs (30d)
- 31
Getting set up
This project ships no dev container, Dockerfile or contributing guide, so setting up is up to you: start from its README, and see our first-contribution guide for the general steps.
First steps
- Read the whole issue, then the project's contributing guide.
- Comment on the issue to say you are picking it up — it saves two people doing the same work.
- Fork the repository and make your change on a branch.
- Open a pull request that references the issue number.
More from raspberrypi/linux
-
Difficulty 2/5 1-3 hours Newbie friendliness 68/100
raspberrypi/linux#7415 · 2 comments · 1 reaction ·
Maintainers usually reply within 1 day
-
rp1-cfe doesn't forward V4L2_EVENT_SOURCE_CHANGE event from csi-2 sensor driver to userspace appOpen
Difficulty 2/5 1-3 hours Newbie friendliness 72/100
raspberrypi/linux#7399 · 1 comment ·
Maintainers usually reply within 1 day
-
Difficulty 1/5 Under an hour Newbie friendliness 82/100
raspberrypi/linux#7357 · 1 comment ·
Maintainers usually reply within 1 day
-
Difficulty 2/5 1-3 hours Newbie friendliness 68/100
raspberrypi/linux#7054 · 2 comments ·
Maintainers usually reply within 1 day
-
Difficulty 4/5 3-5 days Newbie friendliness 48/100
raspberrypi/linux#7770 ·
Maintainers usually reply within 1 day
All issues in raspberrypi/linux
Similar issues
-
Difficulty 1/5 Under an hour Newbie friendliness 85/100
Maintainers usually reply within 1 day
-
slice
Difficulty 2/5 Under an hour Newbie friendliness 72/100
Life-Framework/Life-Framework#3465 ·
Maintainers usually reply within 1 day