Enabling ObCaseInsensitive leads to Error code: Wsl/Service/CreateInstance/CreateVm/ConfigureGpu/HCS/ERROR_PATH_NOT_FOUND
Maintainers usually reply within 1 day
Nobody has claimed this yet.
Assessment
- Difficulty
- 4/5
- Estimated time
- 3-5 days
- Newbie friendliness
- 42/100
- Issue type
- Bug
- Clarity
- Mostly clear
- Activity status
- Active
- Tech stack
- cpp
- Domain
- operating-systems
Research direction
Start by reproducing the reported failure with WSL 2 and the ObCaseInsensitive registry setting enabled, then trace the CreateVm/ConfigureGpu path named in the error. The payload does not identify source files or tests, so locate the relevant WSL startup code and check whether the setting changes the path lookup. Done means WSL starts successfully with the setting enabled.
Written by the indexing model from the issue text.
Description
Windows Version
10.0.26300.9818
WSL Version
3.0.3.0
Are you using WSL 1, WSL 2, or WSLC?
- WSL 2
- WSL 1
- WSLC
Kernel Version
6.18.54.1-1
Distro Version
Current kali-linux
Other Software
WSL version: 3.0.3.0
Kernel version: 6.18.54.1-1
WSLg version: 1.0.79
MSRDC version: 1.2.7391
Direct3D version: 1.611.1-81528511
DXCore version: 10.0.26100.1-240331-1435.ge-release
Windows version: 10.0.26300.9818
Repro Steps
- On default configuration Windows 11, install optional Windows feature WSL
- Install kali-linux distribution
- Reboot
- From CMD, run WSL, and note all's well.
- Using REGEDIT, change registry HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\kernel dword:ObCaseInsensitive from 0 to 1
- Reboot
- From CMD, run WSL
Expected Behavior
WSL should start with no error, giving shell prompt.
Actual Behavior
The system cannot find the path specified.
Error code: Wsl/Service/CreateInstance/CreateVm/ConfigureGpu/HCS/ERROR_PATH_NOT_FOUND
Diagnostic Logs
No response
- Dominant language
- C++
- Stars
- 34.4k
- Forks
- 1.9k
- Avg merge
- 1d 23h
- Merged PRs (30d)
- 166
Getting set up
- No Dockerfile or Docker Compose file
- Has a pull request template
- Read the contributing guide
First steps
- Read the whole issue, then the project's contributing guide.
- Comment on the issue to say you are picking it up — it saves two people doing the same work.
- Fork the repository and make your change on a branch.
- Open a pull request that references the issue number.
More from microsoft/WSL
-
feature wsl2
Difficulty 2/5 1-3 hours Newbie friendliness 80/100
microsoft/WSL#42306 · 3 comments ·
Maintainers usually reply within 1 day
-
feature
Difficulty 2/5 1-3 hours Newbie friendliness 72/100
microsoft/WSL#42114 · 3 comments ·
Maintainers usually reply within 1 day
-
feature kernel wsl2
Difficulty 2/5 1-3 hours Newbie friendliness 68/100
microsoft/WSL#41107 · 3 comments · 1 reaction ·
Maintainers usually reply within 1 day
-
feature kernel
Difficulty 2/5 1-3 hours Newbie friendliness 82/100
microsoft/WSL#41054 · 9 comments · 1 reaction ·
Maintainers usually reply within 1 day
-
feature GPU
Difficulty 1/5 1-3 hours Newbie friendliness 70/100
microsoft/WSL#13592 · 4 comments ·
Maintainers usually reply within 1 day
Similar issues
-
bug
Difficulty 2/5 1-3 hours Newbie friendliness 62/100
nextcloud/passman-android#214 ·
Maintainers usually reply within 1 day
-
Difficulty 1/5 1-3 hours Newbie friendliness 62/100
Maintainers usually reply within 1 day
-
2026.11.0 fails to install on Intel macOS: requirements.txt pins cryptography==50.0.2 for Darwin x86_64May be free again A pull request for this issue was closed without being merged. Open
Difficulty 1/5 Under an hour Newbie friendliness 87/100
esphome/esphome#22892 · 1 comment ·
Maintainers usually reply within 1 day
-
bug
Difficulty 2/5 1-3 hours Newbie friendliness 77/100
distante/esphome-components#50 · 1 comment ·
Maintainers usually reply within 1 day
-
arch-based hyprland
Difficulty 2/5 1-3 hours Newbie friendliness 77/100
noctalia-dev/noctalia#5423 ·
Maintainers usually reply within 1 day