Linux x86_64 Mupen64Next Vulkan crashes with Vsync set to 1 or automatic and fast forwarding
Maintainers usually reply within 2 days
Nobody has claimed this yet.
Assessment
- Difficulty
- 4/5
- Estimated time
- 3-5 days
- Newbie friendliness
- 35/100
- Issue type
- Bug
- Clarity
- Needs clarification
- Activity status
- Active
- Tech stack
- c, linux
- Domain
- computer-graphics
Research direction
Reproduce the crash on Linux with Mupen64Next Parallel Vulkan, Vsync 1 or automatic, and fast forwarding. Capture a backtrace to locate where RetroArch's Vulkan code handles swapchain and vsync during fast forward. No source files or tests are named; start from the Vulkan video driver in the frontend code.
Written by the indexing model from the issue text.
Description
Is there an existing issue for this?
- This is a bug in RetroArch frontend
- I have searched the existing issues
Description
So Mupen64Next Parallel Vulkan crashes when fast forwarding.
I have Max Swapchain images set to 2 and Frame Delay of 5ms.
Switching both off doesn't affect it. Still crashes when fast forwarding.
With Beetle PSX HW Vulkan it works just fine with fast forwarding.
Expected behavior
The fast forwarding wouldn't crash Retroarch in Mupen64Next.
Steps to reproduce the bug
- Install Mupen64Next core and set up lets say Conkers Bad Fur Day to be played.
- Set Vsync to either automatic or 1.
- Run Conkers Bad Fur Day with Parallel settings for Vulkan to kick in.
- Fast forward in the game.
- Notice that it crashes.
Version/Commit
1.22.2 Flatpak
Bisect Results
No response
Present in the nightly version
I don't know
Platform & operating system
Linux Manjaro KDE Wayland
Affected Cores
Mupen64Next
Environment information
KDE Wayland
Flatpak
RX 9070 XT
5950X
32GB RAM
Relevant log output
[INFO] [Environ] SET_SUBSYSTEM_INFO.
[DEBUG] Subsystem ID: 0
Special game type: N64 Disk Drive
Ident: ndd
ID: 1
Content:
[DEBUG] Disk (required)
[DEBUG] Cartridge (required)
[DEBUG] Subsystem ID: 1
Special game type: N64 Transferpak
Ident: gb
ID: 2
Content:
[DEBUG] Gameboy RAM (required)
[DEBUG] Gameboy ROM (required)
[DEBUG] Cartridge (required)
[DEBUG] Subsystems: 2
[INFO] [Core] Using content: "/home/user/Asiakirjat/N64/Conker's Bad Fur Day (USA).z64".
[INFO] [Core] Unloading core...
[INFO] [Core] Unloading core symbols...
[DEBUG] [Video] Does not have enough samples for monitor refresh rate estimation. Requires to run for at least 4096 frames.
[INFO] RetroArch 1.22.2 (Git 69a4f0ea1e)
[INFO] === Build =======================================
[INFO] CPU Model Name: AMD Ryzen 9 5950X 16-Core Processor
[INFO] Ominaisuudet: MMX MMXEXT SSE SSE2 SSE3 SSSE3 SSE4 SSE42 AES AVX AVX2
[INFO] Version: 1.22.2
[INFO] Git: 69a4f0ea1e
[INFO] Built: Nov 11 2011
[INFO] =================================================
[INFO] [Input] Found input driver: "x".
[INFO] [Environ] SET_SUBSYSTEM_INFO.
[DEBUG] Subsystem ID: 0
Special game type: N64 Disk Drive
Ident: ndd
ID: 1
Content:
[DEBUG] Disk (required)
[DEBUG] Cartridge (required)
[DEBUG] Subsystem ID: 1
Special game type: N64 Transferpak
Ident: gb
ID: 2
Content:
[DEBUG] Gameboy RAM (required)
[DEBUG] Gameboy ROM (required)
[DEBUG] Cartridge (required)
[DEBUG] Subsystems: 2
[INFO] [Core] Loading dynamic libretro core from: "/home/user/.var/app/org.libretro.RetroArch/config/retroarch/cores/mupen64plus_next_libretro.so".
[INFO] [Override] Uudelleenohjataan tallennustiedosto kohteeseen "/home/user/.var/app/org.libretro.RetroArch/config/retroarch/saves/Mupen64Plus-Next/Conker's Bad Fur Day (USA).srm".
[INFO] [Override] Uudelleenohjataan tilan tallennus kohteeseen "/home/user/.var/app/org.libretro.RetroArch/config/retroarch/states/Mupen64Plus-Next/Conker's Bad Fur Day (USA).state".
[INFO] [Environ] SET_SUBSYSTEM_INFO.
[DEBUG] Special game type: N64 Disk Drive
Ident: ndd
ID: 1
Content:
[DEBUG] Disk (required)
[DEBUG] Cartridge (required)
[DEBUG] Special game type: N64 Transferpak
Ident: gb
ID: 2
Content:
[DEBUG] Gameboy RAM (required)
[DEBUG] Gameboy ROM (required)
[DEBUG] Cartridge (required)
[INFO] [Environ] GET_CORE_OPTIONS_VERSION.
[INFO] [Environ] SET_CORE_OPTIONS_V2.
[INFO] [Environ] SET_CONTROLLER_INFO.
[DEBUG] Portti 1:
[DEBUG] "Controller" (1)
[DEBUG] "RetroPad" (1)
[DEBUG] Portti 2:
[DEBUG] "Controller" (1)
[DEBUG] "RetroPad" (1)
[DEBUG] Portti 3:
[DEBUG] "Controller" (1)
[DEBUG] "RetroPad" (1)
[DEBUG] Portti 4:
[DEBUG] "Controller" (1)
[DEBUG] "RetroPad" (1)
[INFO] [Environ] GET_SYSTEM_DIRECTORY: "/home/user/.var/app/org.libretro.RetroArch/config/retroarch/system".
[INFO] [Environ] GET_SYSTEM_DIRECTORY: "/home/user/.var/app/org.libretro.RetroArch/config/retroarch/system".
[INFO] [Environ] GET_LOG_INTERFACE.
[INFO] [Environ] GET_PERF_INTERFACE.
[INFO] [Environ] SET_PIXEL_FORMAT: XRGB8888.
[INFO] [Environ] GET_RUMBLE_INTERFACE.
[libretro INFO] mupen64plus: Using full mem base
[INFO] [Environ] GET_SYSTEM_DIRECTORY: "/home/user/.var/app/org.libretro.RetroArch/config/retroarch/system".
[INFO] [Content] Ladataan sisältötiedostoa: "/home/user/Asiakirjat/N64/Conker's Bad Fur Day (USA).z64".
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-rdp-plugin = "parallel"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-rsp-plugin = "parallel"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-ThreadedRenderer = "False"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-BilinearMode = "3point"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-HybridFilter = "True"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-DitheringPattern = "False"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-DitheringQuantization = "False"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-RDRAMImageDitheringMode = "False"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-FXAA = "0"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-MultiSampling = "0"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-FrameDuping = "True"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-Framerate = "Fullspeed"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-virefresh = "2200"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-EnableLODEmulation = "True"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-EnableFBEmulation = "True"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-EnableN64DepthCompare = "False"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-EnableCopyColorToRDRAM = "Async"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-EnableCopyColorFromRDRAM = "False"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-EnableCopyDepthToRDRAM = "Software"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-EnableHWLighting = "False"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-CorrectTexrectCoords = "Off"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-EnableTexCoordBounds = "False"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-EnableInaccurateTextureCoordinates = "False"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-BackgroundMode = "OnePiece"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-EnableNativeResTexrects = "Disabled"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-txFilterMode = "None"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-txEnhancementMode = "None"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-txFilterIgnoreBG = "True"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-txHiresEnable = "False"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-txCacheCompression = "True"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-txHiresFullAlphaChannel = "False"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-MaxHiResTxVramLimit = "0"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-MaxTxCacheSize = "8000"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-EnableLegacyBlending = "False"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-EnableFragmentDepthWrite = "True"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-EnableShadersStorage = "True"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-EnableTextureCache = "True"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-EnableEnhancedTextureStorage = "False"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-EnableEnhancedHighResStorage = "False"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-EnableHiResAltCRC = "False"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-EnableCopyAuxToRDRAM = "False"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-GLideN64IniBehaviour = "late"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-cpucore = "dynamic_recompiler"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-aspect = "4:3"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-EnableNativeResFactor = "0"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-43screensize = "320x240"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-CountPerOp = "0"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-CountPerOpDenomPot = "0"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-EnableOverscan = "Enabled"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-OverscanTop = "5"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-OverscanLeft = "5"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-OverscanRight = "5"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-OverscanBottom = "5"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-ForceDisableExtraMem = "False"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-IgnoreTLBExceptions = "False"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-parallel-rdp-synchronous = "False"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-parallel-rdp-overscan = "16"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-parallel-rdp-divot-filter = "True"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-parallel-rdp-gamma-dither = "True"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-parallel-rdp-vi-aa = "True"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-parallel-rdp-vi-bilinear = "True"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-parallel-rdp-dither-filter = "True"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-parallel-rdp-upscaling = "1x"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-parallel-rdp-super-sampled-read-back = "False"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-parallel-rdp-super-sampled-read-back-dither = "True"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-parallel-rdp-downscaling = "disable"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-parallel-rdp-native-texture-lod = "False"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-parallel-rdp-native-tex-rect = "True"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-parallel-rdp-deinterlace-method = "Bob"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-pak1 = "rumble"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-pak2 = "memory"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-pak3 = "none"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-pak4 = "none"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-astick-deadzone = "15"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-astick-sensitivity = "100"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-r-cbutton = "C1"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-l-cbutton = "C2"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-d-cbutton = "C3"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-u-cbutton = "C4"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-alt-map = "False"
[DEBUG] [Environ] GET_VARIABLE: mupen64plus-rdp-plugin = "parallel"
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-43screensize = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-169screensize = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-aspect = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-EnableNativeResFactor = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-ThreadedRenderer = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-BilinearMode = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-HybridFilter = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-DitheringPattern = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-DitheringQuantization = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-RDRAMImageDitheringMode = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-MultiSampling = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-FXAA = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-EnableLODEmulation = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-EnableFBEmulation = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-EnableCopyAuxToRDRAM = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-EnableCopyColorToRDRAM = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-EnableCopyColorFromRDRAM = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-EnableCopyDepthToRDRAM = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-BackgroundMode = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-EnableHWLighting = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-CorrectTexrectCoords = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-EnableInaccurateTextureCoordinates = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-EnableTexCoordBounds = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-EnableNativeResTexrects = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-EnableLegacyBlending = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-EnableFragmentDepthWrite = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-EnableN64DepthCompare = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-EnableShadersStorage = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-EnableTextureCache = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-EnableOverscan = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-OverscanTop = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-OverscanLeft = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-OverscanRight = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-OverscanBottom = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-MaxHiResTxVramLimit = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-MaxTxCacheSize = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-txFilterMode = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-txEnhancementMode = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-txFilterIgnoreBG = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-txHiresEnable = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-txCacheCompression = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-txHiresFullAlphaChannel = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-EnableEnhancedTextureStorage = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-EnableHiResAltCRC = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-EnableEnhancedHighResStorage = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-GLideN64IniBehaviour = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-parallel-rdp-synchronous = visible
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-parallel-rdp-overscan = visible
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-parallel-rdp-divot-filter = visible
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-parallel-rdp-gamma-dither = visible
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-parallel-rdp-vi-aa = visible
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-parallel-rdp-vi-bilinear = visible
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-parallel-rdp-dither-filter = visible
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-parallel-rdp-upscaling = visible
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-parallel-rdp-super-sampled-read-back = visible
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-parallel-rdp-super-sampled-read-back-dither = visible
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-parallel-rdp-downscaling = visible
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-parallel-rdp-native-texture-lod = visible
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-parallel-rdp-native-tex-rect = visible
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-parallel-rdp-deinterlace-method = visible
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-angrylion-vioverlay = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-angrylion-sync = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-angrylion-multithread = hidden
[DEBUG] [Environ] SET_CORE_OPTIONS_DISPLAY: mupen64plus-angrylion-overscan = hidden
[INFO] [Environ] SET_HW_RENDER, context type: vulkan.
[INFO] [HW] Requesting Vulkan context.
[INFO] [Environ] SET_HW_RENDER_CONTEXT_NEGOTIATION_INTERFACE.
[libretro DEBUG] mupen64plus: [EmuThread] M64CMD_ROM_OPEN
[libretro INFO] mupen64plus: Goodname: Conker's Bad Fur Day (U) [!]
[libretro INFO] mupen64plus: Name: CONKER BFD
[libretro INFO] mupen64plus: MD5: 00E2920665F2329B95797A7EAABC2390
[libretro INFO] mupen64plus: CRC: 30C7AC50 7704072D
[libretro INFO] mupen64plus: Imagetype: .z64 (native)
[libretro INFO] mupen64plus: Rom size: 67108864 bytes (or 64 Mb or 512 Megabits)
[libretro INFO] mupen64plus: ClockRate = F
[libretro INFO] mupen64plus: Version: 1447
[libretro INFO] mupen64plus: Manufacturer: Nintendo
[libretro INFO] mupen64plus: Cartridge_ID: 5546
[libretro INFO] mupen64plus: Country: USA
[libretro INFO] mupen64plus: PC = 80001000
[libretro INFO] mupen64plus: Save type: 1
[libretro DEBUG] mupen64plus: [EmuThread] M64CMD_ROM_GET_HEADER
[INFO] [Core] libretro-API:n versio: 1, Koottu vastaamaan API: 1
[INFO] [Core] Geometry: 640x480, Aspect: 1.333, FPS: 60.00, Sample rate: 44100.00 Hz.
[INFO] [Video] Set video size to: fullscreen.
[INFO] [Video] Using HW render, vulkan driver forced.
[INFO] [Video] "vulkan" saved as cached driver.
[DEBUG] [Wayland] Add global 1, interface wl_compositor, version 6.
[INFO] [Wayland] Registered interface wl_compositor at version 6.
[DEBUG] [Wayland] Add global 3, interface zwp_tablet_manager_v2, version 2.
[DEBUG] [Wayland] Add global 4, interface zwp_keyboard_shortcuts_inhibit_manager_v1, version 1.
[DEBUG] [Wayland] Add global 5, interface xdg_session_manager_v1, version 1.
[DEBUG] [Wayland] Add global 6, interface zxdg_decoration_manager_v1, version 2.
[INFO] [Wayland] Registered interface zxdg_decoration_manager_v1 at version 2.
[DEBUG] [Wayland] Add global 7, interface wp_viewporter, version 1.
[INFO] [Wayland] Registered interface wp_viewporter at version 1.
[DEBUG] [Wayland] Add global 9, interface wp_fractional_scale_manager_v1, version 1.
[INFO] [Wayland] Registered interface wp_fractional_scale_manager_v1 at version 1.
[DEBUG] [Wayland] Add global 10, interface wl_shm, version 2.
[INFO] [Wayland] Registered interface wl_shm at version 2.
[DEBUG] [Wayland] Add global 11, interface wl_seat, version 10.
[INFO] [Wayland] Registered interface wl_seat at version 10.
[DEBUG] [Wayland] Add global 12, interface zwp_pointer_gestures_v1, version 3.
[DEBUG] [Wayland] Add global 13, interface zwp_pointer_constraints_v1, version 1.
[INFO] [Wayland] Registered interface zwp_pointer_constraints_v1 at version 1.
[DEBUG] [Wayland] Add global 14, interface zwp_relative_pointer_manager_v1, version 1.
[INFO] [Wayland] Registered interface zwp_relative_pointer_manager_v1 at version 1.
[DEBUG] [Wayland] Add global 15, interface wl_data_device_manager, version 3.
[INFO] [Wayland] Registered interface wl_data_device_manager at version 3.
[DEBUG] [Wayland] Add global 16, interface ext_data_control_manager_v1, version 1.
[DEBUG] [Wayland] Add global 17, interface wp_cursor_shape_manager_v1, version 2.
[INFO] [Wayland] Registered interface wp_cursor_shape_manager_v1 at version 2.
[DEBUG] [Wayland] Add global 18, interface zwp_primary_selection_device_manager_v1, version 1.
[DEBUG] [Wayland] Add global 19, interface org_kde_kwin_idle, version 1.
[DEBUG] [Wayland] Add global 20, interface zwp_idle_inhibit_manager_v1, version 1.
[INFO] [Wayland] Registered interface zwp_idle_inhibit_manager_v1 at version 1.
[DEBUG] [Wayland] Add global 21, interface ext_idle_notifier_v1, version 2.
[DEBUG] [Wayland] Add global 22, interface org_kde_plasma_shell, version 8.
[DEBUG] [Wayland] Add global 23, interface org_kde_kwin_appmenu_manager, version 2.
[DEBUG] [Wayland] Add global 24, interface org_kde_kwin_server_decoration_palette_manager, version 1.
[DEBUG] [Wayland] Add global 26, interface org_kde_plasma_virtual_desktop_management, version 4.
[DEBUG] [Wayland] Add global 28, interface org_kde_kwin_shadow_manager, version 2.
[DEBUG] [Wayland] Add global 29, interface org_kde_kwin_dpms_manager, version 1.
[DEBUG] [Wayland] Add global 30, interface org_kde_kwin_server_decoration_manager, version 1.
[DEBUG] [Wayland] Add global 31, interface kde_output_management_v2, version 21.
[DEBUG] [Wayland] Add global 32, interface kde_output_device_registry_v2, version 23.
[DEBUG] [Wayland] Add global 33, interface zxdg_output_manager_v1, version 3.
[DEBUG] [Wayland] Add global 34, interface wl_subcompositor, version 1.
[DEBUG] [Wayland] Add global 35, interface zxdg_exporter_v2, version 1.
[DEBUG] [Wayland] Add global 36, interface zxdg_importer_v2, version 1.
[DEBUG] [Wayland] Add global 37, interface zwp_input_method_v1, version 1.
[DEBUG] [Wayland] Add global 39, interface xdg_activation_v1, version 1.
[DEBUG] [Wayland] Add global 41, interface wp_content_type_manager_v1, version 1.
[INFO] [Wayland] Registered interface wp_content_type_manager_v1 at version 1.
[DEBUG] [Wayland] Add global 42, interface wp_tearing_control_manager_v1, version 1.
[DEBUG] [Wayland] Add global 43, interface xdg_toplevel_drag_manager_v1, version 1.
[DEBUG] [Wayland] Add global 44, interface xdg_toplevel_icon_manager_v1, version 1.
[INFO] [Wayland] Registered interface xdg_toplevel_icon_manager_v1 at version 1.
[DEBUG] [Wayland] Add global 45, interface kde_screen_edge_manager_v1, version 1.
[DEBUG] [Wayland] Add global 46, interface frog_color_management_factory_v1, version 1.
[DEBUG] [Wayland] Add global 47, interface wp_presentation, version 2.
[DEBUG] [Wayland] Add global 48, interface wp_color_manager_v1, version 2.
[DEBUG] [Wayland] Add global 49, interface xdg_wm_dialog_v1, version 1.
[DEBUG] [Wayland] Add global 50, interface kde_external_brightness_v1, version 3.
[DEBUG] [Wayland] Add global 51, interface wp_alpha_modifier_v1, version 1.
[DEBUG] [Wayland] Add global 52, interface wl_fixes, version 2.
[DEBUG] [Wayland] Add global 53, interface wp_fifo_manager_v1, version 1.
[DEBUG] [Wayland] Add global 54, interface wp_single_pixel_buffer_manager_v1, version 1.
[INFO] [Wayland] Registered interface wp_single_pixel_buffer_manager_v1 at version 1.
[DEBUG] [Wayland] Add global 55, interface xdg_toplevel_tag_manager_v1, version 1.
[DEBUG] [Wayland] Add global 56, interface wp_color_representation_manager_v1, version 1.
[DEBUG] [Wayland] Add global 57, interface wp_pointer_warp_v1, version 1.
[DEBUG] [Wayland] Add global 58, interface ext_background_effect_manager_v1, version 1.
[DEBUG] [Wayland] Add global 60, interface zwp_linux_dmabuf_v1, version 5.
[DEBUG] [Wayland] Add global 61, interface wp_linux_drm_syncobj_manager_v1, version 1.
[DEBUG] [Wayland] Add global 62, interface zwp_input_panel_v1, version 1.
[DEBUG] [Wayland] Add global 63, interface xdg_wm_base, version 6.
[INFO] [Wayland] Registered interface xdg_wm_base at version 6.
[DEBUG] [Wayland] Add global 64, interface zwlr_layer_shell_v1, version 5.
[DEBUG] [Wayland] Add global 65, interface org_kde_kwin_keystate, version 5.
[DEBUG] [Wayland] Add global 66, interface wl_output, version 4.
[INFO] [Wayland] Registered interface wl_output at version 4.
[DEBUG] [Wayland] Add global 67, interface wl_output, version 4.
[INFO] [Wayland] Registered interface wl_output at version 4.
[DEBUG] [Wayland] Add global 68, interface wl_output, version 4.
[INFO] [Wayland] Registered interface wl_output at version 4.
[DEBUG] [Wayland] Add global 69, interface wp_drm_lease_device_v1, version 1.
[DEBUG] [Wayland] Add global 70, interface kde_output_order_v1, version 1.
[DEBUG] [Wayland] Add global 71, interface zwp_text_input_manager_v2, version 1.
[DEBUG] [Wayland] Add global 72, interface zwp_text_input_manager_v3, version 2.
[DEBUG] [Wayland] Add global 74, interface org_kde_kwin_slide_manager, version 1.
[DEBUG] [Wayland] Add global 75, interface xdg_system_bell_v1, version 1.
[INFO] [Vulkan] Vulkan dynamic library loaded.
[DEBUG] [Vulkan] Found vulkan context: "vk_wayland".
[DEBUG] [Vulkan] Detecting screen resolution: 1680x1050.
[INFO] [Vulkan] Got HW context negotiation interface 2.
[INFO] [Vulkan] Found GPU at index 0: "AMD Radeon RX 9070 XT (RADV GFX1201)".
[INFO] [Vulkan] Found GPU at index 1: "AMD Radeon RX 9070 XT (RADV GFX1201)".
[INFO] [Vulkan] Found GPU at index 2: "llvmpipe (LLVM 21.1.8, 256 bits)".
[INFO] [Vulkan] Found GPU at index 3: "llvmpipe (LLVM 21.1.8, 256 bits)".
[INFO] [Vulkan] Using GPU index 0.
[INFO] [Vulkan] Using fences for WSI acquire.
[INFO] [Vulkan] Using GPU: "AMD Radeon RX 9070 XT (RADV GFX1201)".
[DEBUG] [Vulkan] Swapchain supports present mode: MAILBOX.
[DEBUG] [Vulkan] Swapchain supports present mode: FIFO.
[DEBUG] [Vulkan] Swapchain supports present mode: IMMEDIATE.
[INFO] [Vulkan] Got 2 swapchain images.
[INFO] [Wayland] Auto fullscreen monitor index, letting compositor decide.
[INFO] [Vulkan] Using resolution 2940x1838.
[INFO] [Vulkan] Using BGRA8888 format.
[INFO] [Vulkan] Loading stock shader.
[DEBUG] [udev] Couldn't open any joypads. Are permissions set correctly for /dev/input/event* and /run/udev/?
[INFO] [Input] Found joypad driver: "udev".
[INFO] [Wayland] Enabling idle inhibitor.
[INFO] [Video] Found display server: "null".
[INFO] [Environ] SET_INPUT_DESCRIPTORS.
[DEBUG] Portti 1:
[DEBUG] "Ristiohjain ylös" => "D-Pad Up"
[DEBUG] "Ristiohjain alas" => "D-Pad Down"
[DEBUG] "Ristiohjain vasen" => "D-Pad Left"
[DEBUG] "Ristiohjain oikea" => "D-Pad Right"
[DEBUG] "B-painike (Alin)" => "A Button (C3)"
[DEBUG] "A-painike (Oikea)" => "(C1)"
[DEBUG] "Y-painike (Vasen)" => "B Button (C2)"
[DEBUG] "X-painike (Ylin)" => "(C4)"
[DEBUG] "Start-painike" => "Start"
[DEBUG] "L-painike (Olka)" => "L Shoulder"
[DEBUG] "R-painike (Olka)" => "R Shoulder"
[DEBUG] "L2-painike (Liipaisin)" => "Z Trigger"
[DEBUG] "R2-painike (Liipaisin)" => "C Buttons Mode"
[DEBUG] "Vasen analogi Y- (Ylös)" => "Control Stick Y"
[DEBUG] "Vasen analogi Y+ (Alas)" => "Control Stick Y"
[DEBUG] "Vasen analogi X- (Vasemmalle)" => "Control Stick X"
[DEBUG] "Vasen analogi X+ (Oikealle)" => "Control Stick X"
[DEBUG] "Oikea analogi Y- (Ylös)" => "C Buttons Y"
[DEBUG] "Oikea analogi Y+ (Alas)" => "C Buttons Y"
[DEBUG] "Oikea analogi X- (Vasemalle)" => "C Buttons X"
[DEBUG] "Oikea analogi X+ (Oikealle)" => "C Buttons X"
[DEBUG] Portti 2:
[DEBUG] "Ristiohjain ylös" => "D-Pad Up"
[DEBUG] "Ristiohjain alas" => "D-Pad Down"
[DEBUG] "Ristiohjain vasen" => "D-Pad Left"
[DEBUG] "Ristiohjain oikea" => "D-Pad Right"
[DEBUG] "B-painike (Alin)" => "A Button (C3)"
[DEBUG] "A-painike (Oikea)" => "(C1)"
[DEBUG] "Y-painike (Vasen)" => "B Button (C2)"
[DEBUG] "X-painike (Ylin)" => "(C4)"
[DEBUG] "Start-painike" => "Start"
[DEBUG] "L-painike (Olka)" => "L Shoulder"
[DEBUG] "R-painike (Olka)" => "R Shoulder"
[DEBUG] "L2-painike (Liipaisin)" => "Z Trigger"
[DEBUG] "R2-painike (Liipaisin)" => "C Buttons Mode"
[DEBUG] "Vasen analogi Y- (Ylös)" => "Control Stick Y"
[DEBUG] "Vasen analogi Y+ (Alas)" => "Control Stick Y"
[DEBUG] "Vasen analogi X- (Vasemmalle)" => "Control Stick X"
[DEBUG] "Vasen analogi X+ (Oikealle)" => "Control Stick X"
[DEBUG] "Oikea analogi Y- (Ylös)" => "C Buttons Y"
[DEBUG] "Oikea analogi Y+ (Alas)" => "C Buttons Y"
[DEBUG] "Oikea analogi X- (Vasemalle)" => "C Buttons X"
[DEBUG] "Oikea analogi X+ (Oikealle)" => "C Buttons X"
[DEBUG] Portti 3:
[DEBUG] "Ristiohjain ylös" => "D-Pad Up"
[DEBUG] "Ristiohjain alas" => "D-Pad Down"
[DEBUG] "Ristiohjain vasen" => "D-Pad Left"
[DEBUG] "Ristiohjain oikea" => "D-Pad Right"
[DEBUG] "B-painike (Alin)" => "A Button (C3)"
[DEBUG] "A-painike (Oikea)" => "(C1)"
[DEBUG] "Y-painike (Vasen)" => "B Button (C2)"
[DEBUG] "X-painike (Ylin)" => "(C4)"
[DEBUG] "Start-painike" => "Start"
[DEBUG] "L-painike (Olka)" => "L Shoulder"
[DEBUG] "R-painike (Olka)" => "R Shoulder"
[DEBUG] "L2-painike (Liipaisin)" => "Z Trigger"
[DEBUG] "R2-painike (Liipaisin)" => "C Buttons Mode"
[DEBUG] "Vasen analogi Y- (Ylös)" => "Control Stick Y"
[DEBUG] "Vasen analogi Y+ (Alas)" => "Control Stick Y"
[DEBUG] "Vasen analogi X- (Vasemmalle)" => "Control Stick X"
[DEBUG] "Vasen analogi X+ (Oikealle)" => "Control Stick X"
[DEBUG] "Oikea analogi Y- (Ylös)" => "C Buttons Y"
[DEBUG] "Oikea analogi Y+ (Alas)" => "C Buttons Y"
[DEBUG] "Oikea analogi X- (Vasemalle)" => "C Buttons X"
[DEBUG] "Oikea analogi X+ (Oikealle)" => "C Buttons X"
[DEBUG] Portti 4:
[DEBUG] "Ristiohjain ylös" => "D-Pad Up"
[DEBUG] "Ristiohjain alas" => "D-Pad Down"
[DEBUG] "Ristiohjain vasen" => "D-Pad Left"
[DEBUG] "Ristiohjain oikea" => "D-Pad Right"
[DEBUG] "B-painike (Alin)" => "A Button (C3)"
[DEBUG] "A-painike (Oikea)" => "(C1)"
[DEBUG] "Y-painike (Vasen)" => "B Button (C2)"
[DEBUG] "X-painike (Ylin)" => "(C4)"
[DEBUG] "Start-painike" => "Start"
[DEBUG] "L-painike (Olka)" => "L Shoulder"
[DEBUG] "R-painike (Olka)" => "R Shoulder"
[DEBUG] "L2-painike (Liipaisin)" => "Z Trigger"
[DEBUG] "R2-painike (Liipaisin)" => "C Buttons Mode"
[DEBUG] "Vasen analogi Y- (Ylös)" => "Control Stick Y"
[DEBUG] "Vasen analogi Y+ (Alas)" => "Control Stick Y"
[DEBUG] "Vasen analogi X- (Vasemmalle)" => "Control Stick X"
[DEBUG] "Vasen analogi X+ (Oikealle)" => "Control Stick X"
[DEBUG] "Oikea analogi Y- (Ylös)" => "C Buttons Y"
[DEBUG] "Oikea analogi Y+ (Alas)" => "C Buttons Y"
[DEBUG] "Oikea analogi X- (Vasemalle)" => "C Buttons X"
[DEBUG] "Oikea analogi X+ (Oikealle)" => "C Buttons X"
[DEBUG] Portti 5:
[DEBUG] Portti 6:
[DEBUG] Portti 7:
[DEBUG] Portti 8:
[INFO] [Audio] Set audio input rate to: 44101.76 Hz.
[DEBUG] [PulseAudio] Sink detected: alsa_output.pci-0000_07_00.1.hdmi-stereo-extra2.
[DEBUG] [PulseAudio] Sink detected: easyeffects_sink.
[DEBUG] [PulseAudio] Sink detected: bluez_output.88_0E_85_5C_0E_5D.1.
[INFO] [PulseAudio] Requested 24576 bytes buffer, got 18432.
[INFO] [Audio] Started synchronous audio driver.
[INFO] [ALSA] Using ALSA version 1.2.14
[INFO] [Microphone] Initialized microphone driver.
[INFO] [Display] Found display driver: "vulkan".
[INFO] [Environ] SET_SUBSYSTEM_INFO.
[DEBUG] Subsystem ID: 0
Special game type: N64 Disk Drive
Ident: ndd
ID: 1
Content:
[DEBUG] Disk (required)
[DEBUG] Cartridge (required)
[DEBUG] Subsystem ID: 1
Special game type: N64 Transferpak
Ident: gb
ID: 2
Content:
[DEBUG] Gameboy RAM (required)
[DEBUG] Gameboy ROM (required)
[DEBUG] Cartridge (required)
[DEBUG] Subsystems: 2
[INFO] [Rewind] Alustetaan takaisinkelauksen puskuria kokoon: 1073 MB
[INFO] [Qt] Reloading shader parameters.
[INFO] [Playlist] Ladataan suosikkien tiedostoa: "/home/user/.var/app/org.libretro.RetroArch/config/retroarch/playlists/builtin/content_favorites.lpl".
[INFO] [Playlist] Ladataan historiatiedostoa: "/home/user/.var/app/org.libretro.RetroArch/config/retroarch/playlists/builtin/content_history.lpl".
[INFO] [Playlist] Ladataan historiatiedostoa: "/home/user/.var/app/org.libretro.RetroArch/config/retroarch/playlists/builtin/content_image_history.lpl".
[INFO] [Playlist] Ladataan historiatiedostoa: "/home/user/.var/app/org.libretro.RetroArch/config/retroarch/playlists/builtin/content_music_history.lpl".
[INFO] [Playlist] Ladataan historiatiedostoa: "/home/user/.var/app/org.libretro.RetroArch/config/retroarch/playlists/builtin/content_video_history.lpl".
[DEBUG] [Audio] Started audio driver "pulse" (is_shutdown=false)
[libretro DEBUG] mupen64plus: [EmuThread] M64CMD_EXECUTE
[libretro INFO] mupen64plus: Game controller 0 (Standard controller) has a Rumble pak plugged in
[libretro INFO] mupen64plus: Game controller 1 (Standard controller) has a Memory pak plugged in
[libretro INFO] mupen64plus: Game controller 2 (Standard controller) has nothing plugged in
[libretro INFO] mupen64plus: Game controller 3 (Standard controller) has nothing plugged in
[libretro INFO] mupen64plus: Using CIC type X105
[INFO] [Environ] SET_MEMORY_MAPS.
[DEBUG] ndx flags ptr offset start select disconn len addrspace
[DEBUG] 001 M1A1bc 0x7f7de51f0000 00000000 80000000 20000000 C0000000 00800000
[DEBUG] 002 M1A1bc 0x7f7de51f0000 00000000 A0000000 00000000 00000000 00800000
[DEBUG] 003 M1A1bc 0x7f7e4f45ec08 00000000 A3F00000 00000000 00000000 000FFFFF
[DEBUG] 004 M1A1bc 0x7f7de91f0000 00000000 A4000000 00000000 00000000 0000FFFF
[DEBUG] 005 M1A1bc 0x7f7e4f45e8d0 00000000 A4040000 00000000 00000000 0000FFFF
[DEBUG] 006 M1A1bc 0x7f7e4f45e8f0 00000000 A4080000 00000000 00000000 0000FFFF
[DEBUG] 007 M1A1bc 0x7f7e4f45e000 00000000 A4100000 00000000 00000000 0000FFFF
[DEBUG] 008 M1A1bc 0x7f7e4f45e020 00000000 A4200000 00000000 00000000 0000FFFF
[DEBUG] 009 M1A1bc 0x7f7e4f45e9a0 00000000 A4300000 00000000 00000000 0000FFFF
[DEBUG] 010 M1A1bc 0x7f7e4f45ea88 00000000 A4400000 00000000 00000000 0000FFFF
[DEBUG] 011 M1A1bc 0x7f7e4f45e938 00000000 A4500000 00000000 00000000 0000FFFF
[DEBUG] 012 M1A1bc 0x7f7e4f45e9b8 00000000 A4600000 00000000 00000000 0000FFFF
[DEBUG] 013 M1A1bc 0x7f7e4f45ea20 00000000 A4700000 00000000 00000000 0000FFFF
[DEBUG] 014 M1A1bc 0x7f7e4f45ea48 00000000 A4800000 00000000 00000000 0000FFFF
[DEBUG] 015 M1A1bc 0x7f7e4f5e1470 00000000 A8000000 00000000 00000000 0001FFFF
[DEBUG] 016 M1A1bC 0x7f7ddd1ed010 00000000 B0000000 00000000 00000000 03FFFFFF
[DEBUG] 017 M1A1bC 0x7f7e04df0000 00000000 BFC00000 00000000 00000000 000007C0
[DEBUG] 018 M1A1bc 0x7f7e04df07c0 00000000 BFC007C0 00000000 00000000 00000040
[libretro INFO] Using 2 sync frames for parallel-RDP.
[libretro INFO] paraLLEl-RDP: Using RDRAM size of 8388608 bytes.
[libretro INFO] mupen64plus: Initializing 4 RDRAM modules for a total of 8 MB
[libretro INFO] mupen64plus: Starting R4300 emulator: Dynamic Recompiler
[libretro INFO] mupen64plus: Init new dynarec
[libretro INFO] mupen64plus: Enabled TLB
[DEBUG] [Vulkan] Creating swapchain with present mode: FIFO.
[DEBUG] [Vulkan] Creating swapchain with present mode: FIFO.
[DEBUG] [Vulkan] Creating swapchain with present mode: MAILBOX.
- Dominant language
- C
- Stars
- 14.6k
- Forks
- 2.4k
- Avg merge
- 2d 5h
- Merged PRs (30d)
- 63
Getting set up
- No Dockerfile or Docker Compose file
- Has a pull request template
- Read the contributing guide
First steps
- Read the whole issue, then the project's contributing guide.
- Comment on the issue to say you are picking it up — it saves two people doing the same work.
- Fork the repository and make your change on a branch.
- Open a pull request that references the issue number.
More from libretro/RetroArch
-
Difficulty 2/5 1-3 hours Newbie friendliness 68/100
libretro/RetroArch#20108 · 3 comments ·
Maintainers usually reply within 2 days
-
Difficulty 1/5 Under an hour Newbie friendliness 78/100
Maintainers usually reply within 2 days
-
Difficulty 2/5 1-3 hours Newbie friendliness 78/100
libretro/RetroArch#20061 · 3 comments ·
Maintainers usually reply within 2 days
-
[Feature Request] [UX] Improve descriptions for "Rewind Buffer Size" and "Rewind Buffer Size Step"Openfeature request
Difficulty 2/5 1-3 hours Newbie friendliness 65/100
libretro/RetroArch#19915 · 2 comments ·
Maintainers usually reply within 2 days
-
Difficulty 2/5 1-3 hours Newbie friendliness 68/100
Maintainers usually reply within 2 days
All issues in libretro/RetroArch
Similar issues
-
Difficulty 2/5 1-3 hours Newbie friendliness 76/100
schrodinger/pymol-open-source#532 ·
-
Difficulty 1/5 Under an hour Newbie friendliness 86/100
CTSRD-CHERI/cheribsd#2769 ·
Maintainers usually reply within 2 days
-
good first issue not started
Difficulty 2/5 1-3 hours Newbie friendliness 90/100
CU-Robotics/firmware#257 ·
-
documentation good first issue
Difficulty 2/5 1-3 hours Newbie friendliness 82/100
-
severity: low
Difficulty 2/5 1-3 hours Newbie friendliness 83/100
luainkernel/lunatik#2633 ·
Maintainers usually reply within 1 day