3.3.1: create temp directory in source tree causes build fail
Nobody has claimed this yet.
Assessment
- Difficulty
- 2/5
- Estimated time
- 1-3 hours
- Newbie friendliness
- 42/100
- Issue type
- Bug
- Clarity
- Mostly clear
- Activity status
- Stale
- Tech stack
- python
- Domain
- build-system
Research direction
Start by inspecting pyproject.toml and reproduce the failure by creating a temp/ directory, then run /usr/bin/python3 -sBm build -w --no-isolation. Check the package-discovery configuration against the reported setuptools error; done means the build completes successfully with the extra directory present.
Written by the indexing model from the issue text.
Description
After create temp/ directory in source tree I found that build fails.
Looks like some bits are missing in pyproject.toml
Here is test case
+ mkdir temp
+ cd jaraco.classes-3.3.1
+ ASMFLAGS='-m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -O2 -g -grecord-gcc-switches -pipe -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -fdata-sections -ffunction-sections -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -flto=auto -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -Wall -Werror=format-security'
+ CFLAGS='-m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -O2 -g -grecord-gcc-switches -pipe -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -fdata-sections -ffunction-sections -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -flto=auto -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -Wall -Werror=format-security'
+ CXXFLAGS='-m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -O2 -g -grecord-gcc-switches -pipe -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -fdata-sections -ffunction-sections -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -flto=auto -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -Wall -Werror=format-security'
+ FFLAGS='-m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -O2 -g -grecord-gcc-switches -pipe -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -fdata-sections -ffunction-sections -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -flto=auto -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -Wall -Werror=format-security -I/usr/lib64/gfortran/modules'
+ FCFLAGS='-m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -O2 -g -grecord-gcc-switches -pipe -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -fdata-sections -ffunction-sections -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -flto=auto -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -Wall -Werror=format-security -I/usr/lib64/gfortran/modules'
+ LDFLAGS='-specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--gc-sections -Wl,--as-needed -Wl,--build-id=sha1 -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -Wl,-z,pack-relative-relocs -flto=auto -fuse-linker-plugin'
+ RUSTFLAGS='-C codegen-units=1 -C debuginfo=2 -C opt-level=2 -C link-arg=-Wl,--as-needed -C link-arg=-Wl,--build-id=sha1 -C link-arg=-Wl,-z,now -C link-arg=-specs=/usr/lib/rpm/redhat/redhat-hardened-ld -C link-arg=-Wl,-z,pack-relative-relocs -C link-arg=-Wl,-z,relro -C link-arg=-flto=auto --cap-lints=warn'
+ VALAFLAGS=-g
+ CC=/usr/bin/gcc
+ CXX=/usr/bin/g++
+ FC=/usr/bin/gfortran
+ AR=/usr/bin/gcc-ar
+ NM=/usr/bin/gcc-nm
+ RANLIB=/usr/bin/gcc-ranlib
+ export ASMFLAGS CFLAGS CXXFLAGS FFLAGS FCFLAGS LDFLAGS VALAFLAGS CC CXX FC AR NM RANLIB RUSTFLAGS VALAFLAGS
+ PBR_VERSION=3.3.1
+ PDM_BUILD_SCM_VERSION=3.3.1
+ SETUPTOOLS_SCM_PRETEND_VERSION=3.3.1
+ /usr/bin/python3 -sBm build -w --no-isolation
* Getting build dependencies for wheel...
error: Multiple top-level packages discovered in a flat-layout: ['jaraco', 'temp'].
To avoid accidental inclusion of unwanted files or directories,
setuptools will not proceed with this build.
If you are trying to create a single distribution with multiple packages
on purpose, you should not rely on automatic discovery.
Instead, consider the following options:
1. set up custom discovery (`find` directive with `include` or `exclude`)
2. use a `src-layout`
3. explicitly set `py_modules` or `packages` with a list of names
To find more information, look for "package discovery" on setuptools docs.
ERROR Backend subprocess exited when trying to invoke get_requires_for_build_wheel
- Dominant language
- No language data
- Stars
- 152
- Forks
- 38
- Avg merge
- 6h 27m
- Merged PRs (30d)
- 4
Getting set up
This project ships no dev container, Dockerfile or contributing guide, so setting up is up to you: start from its README, and see our first-contribution guide for the general steps.
First steps
- Read the whole issue, then the project's contributing guide.
- Comment on the issue to say you are picking it up — it saves two people doing the same work.
- Fork the repository and make your change on a branch.
- Open a pull request that references the issue number.
More from jaraco/skeleton
-
Difficulty 1/5 Under an hour Newbie friendliness 91/100
-
Difficulty 3/5 1-2 days Newbie friendliness 67/100
-
Difficulty 5/5 Over a week Newbie friendliness 35/100
-
Difficulty 4/5 3-5 days Newbie friendliness 32/100
-
Difficulty 4/5 3-5 days Newbie friendliness 35/100
Similar issues
-
Difficulty 2/5 1-3 hours Newbie friendliness 76/100
ivo-toby/mcp-openapi-server#113 ·
-
Difficulty 2/5 1-3 hours Newbie friendliness 78/100
-
Difficulty 1/5 Under an hour Newbie friendliness 88/100
Maintainers usually reply within 2 days
-
Difficulty 2/5 1-3 hours Newbie friendliness 62/100
podman-container-tools/skopeo#3041 ·
Maintainers usually reply within 1 day
-
Difficulty 1/5 Under an hour Newbie friendliness 78/100
excalidraw/excalidraw#12641 ·
Maintainers usually reply within 1 day