Evaluate Concurrent NDT, Gyro Odometry, and EKF Processing with Replay
メンテナーはふだん 2 日以内に返信
評価
- 難易度
- 5/5
- 見積もり時間
- 1週間以上
- 初心者へのやさしさ
- 18/100
- issue の種類
- 機能追加
- 明瞭さ
- おおむね明確
- 活発さ
- 活発
- 技術スタック
- rust
- 領域
- performance, robotics, testing
調査の方向性
The payload names no files or tests, so start by locating the existing replay/benchmark harness and the documented task/CPU assignments for NDT, gyro odometry, and EKF in the Awkernel tree. Read the timing and trace configuration first, then identify how input release, queues, and output publication are currently instrumented. Done means a documented replay configuration with reproducible traces and metrics for scheduling delay, dropped inputs, convergence, and localization error against a low-interference baseline.
索引モデルが issue の本文から書いたものです。
説明
Establish a reproducible replay-based evaluation of the integrated Awkernel localization pipeline, with NDT, gyro odometry, and EKF processing active concurrently. Evaluate scheduling interference, temporal correctness, and localization behavior under representative workloads.
Scope:
- Replay timestamped LiDAR, IMU, and vehicle velocity data while preserving their relative timing and input rates
- Run NDT, gyro odometry, and periodic EKF processing concurrently using documented task and CPU assignments
- Include the EKF-to-NDT initial-pose feedback path with causal data availability
- Compare a low-interference baseline with concurrent execution under increasing NDT workloads
- Trace input release, task readiness, execution, measurement consumption, and output publication
- Record queue occupancy, dropped inputs, convergence outcomes, and localization results
Acceptance criteria:
- Replay datasets, clock mapping, playback rate, task periods, deadlines, priorities, and CPU assignments are documented.
- Input release is independent of processing completion, so slow processing does not silently reduce the offered workload.
- Input and task traces confirm that the intended concurrent workload is exercised.
- Buffering and overflow policies are explicit, and delayed or dropped inputs remain visible in the results.
- Scheduling delay, execution time, deadline misses, output latency, and consumed-input age are measured with defined timing boundaries.
- Localization error and NDT convergence are evaluated alongside timing metrics, using ground truth where available.
- Repeated runs report variability and retain sufficient configuration and trace data for reproduction.
- Any differences from a reference run are analyzed with respect to both numerical behavior and measurement-consumption timing.
Out of scope:
Live sensor integration, closed-loop vehicle control, exhaustive scheduler comparisons, and systematic fault injection reserved for M3.
- 主要言語
- Rust
- スター
- 282
- フォーク
- 12
- 平均マージ
- 2日 9時間
- マージ済み PR(30日)
- 28
環境構築
このプロジェクトには開発コンテナ、Dockerfile、コントリビューションガイドがありません。まず README を読み、一般的な手順ははじめてのコントリビューションガイドを参照してください。
はじめの一歩
- issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
- 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
- リポジトリをフォークし、ブランチを切って変更します。
- issue 番号を参照したプルリクエストを送ります。
tier4/awkernel のほかの issue
-
難易度 1/5 1時間未満 初心者へのやさしさ 88/100
メンテナーはふだん 2 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 75/100
メンテナーはふだん 2 日以内に返信
-
難易度 4/5 3〜5日 初心者へのやさしさ 48/100
メンテナーはふだん 2 日以内に返信
-
難易度 4/5 3〜5日 初心者へのやさしさ 48/100
メンテナーはふだん 2 日以内に返信
-
Deadlock in ixgbeオープン
難易度 4/5 3〜5日 初心者へのやさしさ 25/100
メンテナーはふだん 2 日以内に返信
似ている issue
-
marketing
難易度 2/5 1〜3時間 初心者へのやさしさ 82/100
メンテナーはふだん 1 日以内に返信
-
難易度 1/5 1時間未満 初心者へのやさしさ 88/100
flashbots/panetiere#46 · コメント 1 件 ·
メンテナーはふだん 5 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 78/100
jlcodes99/cockpit-tools#3190 ·
メンテナーはふだん 4 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 72/100
Feyisara2108/stellargive#1376 ·
メンテナーはふだん 1 日以内に返信
-
area:post bug effort:medium P7 source:agent
難易度 2/5 1〜3時間 初心者へのやさしさ 78/100
メンテナーはふだん 1 日以内に返信