Writing large number of metrics to Google Cloud Storage via Cloud Storage FUSE is very slow
メンテナーはふだん 1 日以内に返信
まだ誰も着手していません。
評価
- 難易度
- 4/5
- 見積もり時間
- 3〜5日
- 初心者へのやさしさ
- 38/100
- issue の種類
- バグ
- 明瞭さ
- おおむね明確
- 活発さ
- 停滞
- 技術スタック
- google-cloud, python
- 領域
- cloud, performance
調査の方向性
tensorboard.summary.writer.event_file_writer.EventFileWriter から始め、そこにある汎用ファイルライターが fs_supports_append をどのように扱うかを調べます。Google Cloud Storage FUSE パスで比較を再現し、その後、多数のイベントを書き込んでも示されている遅延を回避しつつ、通常のローカルファイルシステムの動作が維持されることを確認します。ペイロードではテストファイルを指定していません。
索引モデルが issue の本文から書いたものです。
説明
This can be trivially reproduced given that you have an access to some Google Cloud project in which you have permissions to run Vertex AI custom training jobs and create Google Cloud Storage (GCS) buckets.
- In Vertex AI, submit some fake custom training job (using e.g.
python:3.10Docker image andcommand: ["sleep", "3600"]) with interactive shell enabled (if you're submitting this job via Python's SDK, simply passenable_web_access=TruetoCustomJob's.submit()method). - Once you'd get this job in "Training" state, open two terminals by clicking "Launch web terminal" in its GUI - we will use them for Python and Bash, respectively.
- In GCS, create some bucket of your choice and make sure that you can write to it.
- In the first terminal, run
pip install tensorboardand then launch Python interpreter. - Copy & paste this code to Python's shell, replacing
<NAME_OF_YOUR_BUCKET>with the name of the bucket that you've created in step (3):
from time import time
from tensorboard.compat.proto import event_pb2
from tensorboard.compat.proto.summary_pb2 import Summary
from tensorboard.summary.writer.event_file_writer import EventFileWriter
path = "/gcs/<NAME_OF_YOUR_BUCKET>/"
def get_fake_metric(i):
summary = Summary(value=[Summary.Value(tag=f"val_metric{i}", simple_value=0.123)])
event = event_pb2.Event(summary=summary)
event.wall_time = time()
event.step = 1
return event
- In the second terminal (Bash),
cdto/gcs/<NAME_OF_YOUR_BUCKET>/and make sure that there are no existing event files there. - We will start with the default writer - paste this to Python's shell:
writer = EventFileWriter(path)
- Switch to Bash and run the following (we will be using this to monitor the size of event files - at the beginning you should see one such file having 88 bytes):
while true; do date '+%H:%M:%S'; ls -l | grep event; sleep 1; done
- Switch to Python and run:
for i in range(200): writer.add_event(get_fake_metric(i))
- Switch to Bash and observe how your event file is growing - it should reach slightly above 10 KB. Once it will stop growing, terminate your monitoring loop and note how long it took (for me, it was
2m23s). Delete this file afterwards. - Now, we will repeat this experiment with slightly modified writer. Switch to Python and paste the following:
writer = EventFileWriter(path)
assert writer._general_file_writer.fs_supports_append
writer._general_file_writer.fs_supports_append = False
- Switch to Bash and run the same monitoring loop as in step (8).
- Switch to Python and run the same loop as in step (9), followed by
writer.flush()because otherwise you'd have to wait extra 2 minutes. - Switch to Bash and notice that your event file reached its expected size almost instantly.
Q: What does this experiment show?
A: It shows that EventFileWriter is not aware of Cloud Storage FUSE filesystem, which leads to suboptimal performance (and to make it clear: this monkey-patching of fs_supports_append doesn't mean that this fs doesn't support append - it's just a hack meant to foolEventFileWriter).
Q: But writing events to disk is asynchronous, so even if it is slow, why should we care?
A: Because some training frameworks (e.g. PyTorch Lightning) explicitly flush metrics at the end of the validation loop (which is quite reasonable thing to do, I'd say), and with hundreds of them (600+ in my case), training is stuck for non-negligible time after each validation (7-8 minutes in my case) - and the more frequent the validations, the more badly it accumulates w.r.t. total training time and GPU utilization. And besides, good engineers simply can't stand seeing that writing such relatively small amount of data takes so much time ;)
- 主要言語
- TypeScript
- スター
- 7.2k
- フォーク
- 1.7k
- 平均マージ
- 1日 13時間
- マージ済み PR(30日)
- 3
環境構築
- Dockerfile または Docker Compose ファイルあり
- プルリクエストのテンプレートあり
- コントリビューションガイドを読む
はじめの一歩
- issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
- 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
- リポジトリをフォークし、ブランチを切って変更します。
- issue 番号を参照したプルリクエストを送ります。
tensorflow/tensorboard のほかの issue
-
node_repositories in WORKSPACE missing linux_ppc64le and linux_s390x entries for Node.js 18.20.8オープン
難易度 1/5 1時間未満 初心者へのやさしさ 92/100
tensorflow/tensorboard#7140 · リアクション 1 件 ·
メンテナーはふだん 1 日以内に返信
-
Error Parsing Hyper Parameters (`HPARAMS`) on Windows対応中かも @Ramnath0521 が 4 日前に担当しました。 オープン
難易度 2/5 1〜3時間 初心者へのやさしさ 35/100
tensorflow/tensorboard#7175 ·
メンテナーはふだん 1 日以内に返信
-
難易度 5/5 1週間以上 初心者へのやさしさ 10/100
tensorflow/tensorboard#7159 ·
メンテナーはふだん 1 日以内に返信
-
installオープン
難易度 5/5 1週間以上 初心者へのやさしさ 10/100
tensorflow/tensorboard#7158 ·
メンテナーはふだん 1 日以内に返信
-
難易度 4/5 3〜5日 初心者へのやさしさ 35/100
tensorflow/tensorboard#7153 ·
メンテナーはふだん 1 日以内に返信
tensorflow/tensorboard の issue をすべて見る
似ている issue
-
documentation lens:human needs-triage
難易度 2/5 1〜3時間 初心者へのやさしさ 73/100
thebristolsound/birdbrain#2246 ·
メンテナーはふだん 1 日以内に返信
-
難易度 1/5 1時間未満 初心者へのやさしさ 78/100
メンテナーはふだん 1 日以内に返信
-
bug ready-for-human
難易度 2/5 1〜3時間 初心者へのやさしさ 72/100
BoardGamesEmpire/board-games-empire-backend#1452 · コメント 1 件 ·
メンテナーはふだん 1 日以内に返信
-
good first issue stretch
難易度 2/5 1〜3時間 初心者へのやさしさ 65/100
-
難易度 2/5 1〜3時間 初心者へのやさしさ 76/100
メンテナーはふだん 1 日以内に返信