Hacktoberfest 2026:メンテナが10月に向けて印を付けた、オープンで初心者向けの issue。 Hacktoberfest の issue を見る

impl embedded_hal::digital::Error for linux_embedded_hal::gpio_cdev::Error

オープン
#112 コメント 2 件 リアクション 0 件 担当者 0 名 GitHub で見る

まだ誰も着手していません。

評価

難易度
3/5
見積もり時間
1〜2日
初心者へのやさしさ
42/100
issue の種類
機能追加
明瞭さ
おおむね明確
活発さ
停滞
技術スタック
linux, rust
領域
embedded-iot

調査の方向性

まず linux_embedded_hal::gpio_cdev::Error を見つけ、既存の linux_embedded_hal::spi::SPIError による embedded-hal::spi::Error の実装と比較します。embedded_hal::digital::Error の要件を確認し、GPIO の初期化エラーをドライバーのエラー enum で使用できること、および関連するチェックに合格することを検証します。

索引モデルが issue の本文から書いたものです。

説明

I'm trying to write an initialisation function for a driver, but the fact that the pin initialisation functions don't give me an embedded-hal Error trait is being a bit of a pain in the behind for me.
I can't properly incorperate the errors that arise when setting up gpios in my drivers error enum.

My situation is an SPI device that has two additional gpios, a reset and an interrupt pin.
This is a very hardware specific driver so the pins and spidev are created in the driver::new() function.

The linux_embedded_hal::spi::SPIError does implement embedded_hal::spi::Error so that one is fine I think.

Is this a workable idea?

主要言語
Rust
スター
319
フォーク
60
PR マージ指標
30日以内にマージされた PR はありません

環境構築

このプロジェクトの環境構築ファイルはまだ確認していません。まず README を読み、一般的な手順ははじめてのコントリビューションガイドを参照してください。

はじめの一歩

  1. issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
  2. 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
  3. リポジトリをフォークし、ブランチを切って変更します。
  4. issue 番号を参照したプルリクエストを送ります。

rust-embedded/linux-embedded-hal のほかの issue

rust-embedded/linux-embedded-hal の issue をすべて見る

似ている issue

Rust の issue をもっと見る

新しい issue をメールで受け取る

初心者向けの GitHub issue を短くまとめたダイジェスト。