`bundle lock --add-checksums` writes blank `CHECKSUMS` entries on the first run when a source's gems are only in optional or excluded groups
メンテナーはふだん 1 日以内に返信
まだ誰も着手していません。
評価
- 難易度
- 4/5
- 見積もり時間
- 1〜2日
- 初心者へのやさしさ
- 55/100
- issue の種類
- バグ
- 明瞭さ
- 明確に書かれている
- 活発さ
- 活発
- 技術スタック
- ruby
- 領域
- build-system
調査の方向性
Start with Definition#add_checksums, LockfileGenerator#add_checksums, and the specs.each materialization path described in the report. Trace how optional and excluded groups affect checksum fetching and fallback calculation, then compare that with the specs written from definition.resolve. Done means the first bundle lock --add-checksums run writes populated checksums for every locked gem, including the reported optional and excluded group cases.
索引モデルが issue の本文から書いたものです。
説明
Describe the problem as clearly as you can
When migrating an existing Gemfile.lock without a CHECKSUMS section via bundle lock --add-checksums, Bundler writes blank checksum lines (for example rack (3.1.12)) for any gem source whose gems are all in an unrequested optional: true group or a BUNDLE_WITHOUT-excluded group (such as a scoped source inside an optional group, or a zero-runtime-dependency gemspec project with BUNDLE_WITHOUT=development). A subsequent BUNDLE_FROZEN=true install that includes the group fails with exit code 16 (Your lockfile has an empty CHECKSUMS entry). Running bundle lock --add-checksums a second time populates the sha256=... digest.
When no re-resolution is needed, Definition#add_checksums calls specs.each (materialize(requested_dependencies)), which skips unrequested optional: true and without groups (both for triggering Source::Rubygems compact-index fetches and for computing fallback checksums from installed .gem packages on disk), whereas LockfileGenerator#add_checksums emits CHECKSUMS entries for every spec in definition.resolve. On the second run, check_lockfile sees the blank entry in CHECKSUMS, sets @locked_spec_with_empty_checksums, and forces a remote re-resolution.
Did you try upgrading rubygems & bundler?
Yes. Reproduced on RubyGems / Bundler 4.1.0 (Ruby 4.0.9) and on ruby/rubygems master (5879ffe34b, 4.2.0.dev).
Post steps to reproduce the problem
mkdir /tmp/repro-opt-checksum && cd /tmp/repro-opt-checksum
cat > Gemfile << 'EOF'
source "https://rubygems.org"
group :opt, optional: true do
gem "rack", "3.1.12"
end
EOF
BUNDLE_LOCKFILE_CHECKSUMS=false bundle lock
bundle lock --add-checksums
cat Gemfile.lock
BUNDLE_FROZEN=true BUNDLE_WITH=opt BUNDLE_PATH=vendor/bundle bundle install
bundle lock --add-checksums
cat Gemfile.lock
Which command did you run?
bundle lock --add-checksums
What were you expecting to happen?
The first bundle lock --add-checksums run should populate sha256=... checksums for all locked gems in Gemfile.lock (https://bundler.io/man/bundle-lock.1.html), matching the second run, so BUNDLE_FROZEN=true BUNDLE_WITH=opt bundle install succeeds.
What happened instead?
$ BUNDLE_LOCKFILE_CHECKSUMS=false bundle lock
Writing lockfile to /tmp/repro-opt-checksum/Gemfile.lock
Fetching gem metadata from https://rubygems.org/..
Resolving dependencies...
$ bundle lock --add-checksums
Writing lockfile to /tmp/repro-opt-checksum/Gemfile.lock
$ cat Gemfile.lock
GEM
remote: https://rubygems.org/
specs:
rack (3.1.12)
PLATFORMS
ruby
x86_64-linux
DEPENDENCIES
rack (= 3.1.12)
CHECKSUMS
rack (3.1.12)
BUNDLED WITH
4.1.0
$ BUNDLE_FROZEN=true BUNDLE_WITH=opt BUNDLE_PATH=vendor/bundle bundle install
Your lockfile has an empty CHECKSUMS entry for "rack", but can't be updated
because frozen mode is set
Run `bundle install` elsewhere and add the updated Gemfile.lock to version
control.
$ bundle lock --add-checksums
Fetching gem metadata from https://rubygems.org/..
Resolving dependencies...
Writing lockfile to /tmp/repro-opt-checksum/Gemfile.lock
$ cat Gemfile.lock
GEM
remote: https://rubygems.org/
specs:
rack (3.1.12)
PLATFORMS
ruby
x86_64-linux
DEPENDENCIES
rack (= 3.1.12)
CHECKSUMS
rack (3.1.12) sha256=00d83055c89273eb13679ab562767b8826955aa6c4371d7d161deb975c50c540
BUNDLED WITH
4.1.0
If not included with the output of your command, run bundle env and paste the output below
## Environment
```
Bundler 4.1.0
Platforms ruby, x86_64-linux
Ruby 4.0.9p0 (2026-10-23 revision 3e93b23afcec3433f6aecc34b5d832799d754238) [x86_64-linux]
Full Path /opt/ruby-4.0.9/bin/ruby
Config Dir /opt/ruby-4.0.9/etc
RubyGems 4.1.0
Gem Home /opt/ruby-4.0.9/lib/ruby/gems/4.0.0
Gem Path /tmp/repro-opt-home/.local/share/gem/ruby/4.0.0:/opt/ruby-4.0.9/lib/ruby/gems/4.0.0
User Home /tmp/repro-opt-home
User Path /tmp/repro-opt-home/.local/share/gem/ruby/4.0.0
Bin Dir /opt/ruby-4.0.9/bin
Git 2.39.5
```
## Bundler Build Metadata
```
Timestamp 2026-11-16
Git SHA 9af9267
```
## Gemfile
### Gemfile
```ruby
source "https://rubygems.org"
group :opt, optional: true do
gem "rack", "3.1.12"
end
```
### Gemfile.lock
```
GEM
remote: https://rubygems.org/
specs:
rack (3.1.12)
PLATFORMS
ruby
x86_64-linux
DEPENDENCIES
rack (= 3.1.12)
CHECKSUMS
rack (3.1.12)
BUNDLED WITH
4.1.0
```
Credit: https://ucsbplse.github.io/
- 主要言語
- Ruby
- スター
- 4k
- フォーク
- 2k
- 平均マージ
- 1日 20時間
- マージ済み PR(30日)
- 75
環境構築
このプロジェクトの開発コンテナを、あなたの GitHub アカウントでブラウザ上に起動します。
- Dockerfile・Docker Compose ファイルなし
- プルリクエストのテンプレートあり
- コントリビューションガイドを読む
はじめの一歩
- issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
- 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
- リポジトリをフォークし、ブランチを切って変更します。
- issue 番号を参照したプルリクエストを送ります。
ruby/rubygems のほかの issue
-
難易度 2/5 1〜3時間 初心者へのやさしさ 72/100
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 78/100
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 78/100
メンテナーはふだん 1 日以内に返信
-
難易度 3/5 1〜2日 初心者へのやさしさ 65/100
メンテナーはふだん 1 日以内に返信
-
難易度 4/5 3〜5日 初心者へのやさしさ 56/100
メンテナーはふだん 1 日以内に返信
似ている issue
-
needs verification
難易度 2/5 1〜3時間 初心者へのやさしさ 64/100
メンテナーはふだん 13 日以内に返信
-
🐛 bug 👩💻 équipe CE 🧑🏭 entreprises
難易度 2/5 1〜3時間 初心者へのやさしさ 76/100
betagouv/conseillers-entreprises#4808 ·
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 76/100
-
難易度 2/5 1〜3時間 初心者へのやさしさ 78/100
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 76/100
yosiat/panko_serializer#250 ·