`bundle lock --update` and `bundle update --all` fail with `GemNotFound` when a locked top-level gem version was yanked and only older versions remain
メンテナーはふだん 1 日以内に返信
まだ誰も着手していません。
評価
- 難易度
- 4/5
- 見積もり時間
- 3〜5日
- 初心者へのやさしさ
- 55/100
調査の方向性
Start with Definition#resolution_base, additional_base_requirements_to_prevent_downgrades, and Resolver#setup_solver in the Bundler resolver code. Trace how base_requirements filters candidates before find_names_to_relax and @base.unlock_names run. Reproduce with the supplied yanked-gem steps; done when bundle lock --update and bundle update --all resolve aa (1.0.0) as the named update commands do.
索引モデルが issue の本文から書いたものです。
説明
Describe the problem as clearly as you can
When a top-level gem in Gemfile is locked to 2.0.0 and 2.0.0 is later yanked from the gem source while 1.0.0 remains available, both bundle lock --update and bundle update --all fail with exit code 7 (Bundler::GemNotFound) and print a contradictory error claiming no gem matching aa was found while listing aa-1.0.0 in the source. Naming the gem explicitly (bundle update aa or bundle lock --update aa) or locking without a prior Gemfile.lock succeeds and resolves aa (1.0.0).
In Definition#resolution_base, additional_base_requirements_to_prevent_downgrades sets base_requirements["aa"] to >= 2.0.0. During Resolver#setup_solver, prepare_dependencies checks versions_for(dep_package, dep_range) (which filters candidates through base_requirements["aa"]), relaxes ignores_prereleases? and prefer_local? when empty, but does not relax base_requirements["aa"], so it calls raise_not_found! before solve_versions can run find_names_to_relax and @base.unlock_names.
Did you try upgrading rubygems & bundler?
Yes. Reproduced on RubyGems / Bundler 4.1.0 (Ruby 4.0.9) and on ruby/rubygems master (5879ffe34b, 4.2.0.dev).
Post steps to reproduce the problem
mkdir repro-yank-update && cd repro-yank-update
mkdir -p repo/gems repo/quick/Marshal.4.8 app
ruby - << 'RUBY'
require "rubygems/package"
require "zlib"
specs = ["1.0.0", "2.0.0"].map do |v|
Gem::Specification.new do |s|
s.name = "aa"
s.version = v
s.summary = "aa"
s.authors = ["test"]
end
end
specs.each do |s|
gem_file = Gem::Package.build(s, true)
File.rename(gem_file, "repo/gems/" + gem_file)
File.binwrite("repo/quick/Marshal.4.8/" + s.original_name + ".gemspec.rz",
Zlib::Deflate.deflate(Marshal.dump(s)))
end
File.binwrite("repo/specs.4.8.gz",
Zlib.gzip(Marshal.dump(specs.map { |s| [s.name, s.version, "ruby"] })))
File.binwrite("repo/prerelease_specs.4.8.gz", Zlib.gzip(Marshal.dump([])))
RUBY
cat > app/Gemfile <<GEMFILE
source "file://$PWD/repo"
gem "aa"
GEMFILE
(cd app && BUNDLE_PATH=vendor/bundle bundle lock)
# Yank 2.0.0 from the source, leaving 1.0.0 available
ruby - << 'RUBY'
require "zlib"
require "fileutils"
FileUtils.rm_f(["repo/gems/aa-2.0.0.gem", "repo/quick/Marshal.4.8/aa-2.0.0.gemspec.rz"])
File.binwrite("repo/specs.4.8.gz",
Zlib.gzip(Marshal.dump([["aa", Gem::Version.new("1.0.0"), "ruby"]])))
RUBY
cd app
BUNDLE_PATH=vendor/bundle bundle lock --update
BUNDLE_PATH=vendor/bundle bundle update --all
BUNDLE_PATH=vendor/bundle bundle update aa
Which command did you run?
bundle lock --update and bundle update --all
What were you expecting to happen?
Both bundle lock --update and bundle update --all should resolve all dependencies against the versions currently available in the source (https://bundler.io/man/bundle-update.1.html) and update Gemfile.lock to aa (1.0.0), matching bundle update aa and bundle lock --update aa.
What happened instead?
$ BUNDLE_PATH=vendor/bundle bundle lock --update
Writing lockfile to /tmp/repro-yank-update/app/Gemfile.lock
Fetching source index from file:///tmp/repro-yank-update/repo/
Could not find gems matching 'aa' valid for all resolution platforms (ruby,
x86_64-linux) in rubygems repository
file:///tmp/repro-yank-update/repo/
or installed locally.
The source contains the following gems matching 'aa':
* aa-1.0.0
$ BUNDLE_PATH=vendor/bundle bundle update --all
Fetching source index from file:///tmp/repro-yank-update/repo/
Could not find gems matching 'aa' valid for all resolution platforms (ruby,
x86_64-linux) in rubygems repository
file:///tmp/repro-yank-update/repo/
or installed locally.
The source contains the following gems matching 'aa':
* aa-1.0.0
$ BUNDLE_PATH=vendor/bundle bundle update aa
Fetching source index from file:///tmp/repro-yank-update/repo/
Resolving dependencies...
Resolving dependencies...
Fetching aa 1.0.0 (was 2.0.0)
Installing aa 1.0.0 (was 2.0.0)
Note: aa version regressed from 2.0.0 to 1.0.0
Bundle updated!
If not included with the output of your command, run bundle env and paste the output below
## Environment
```
Bundler 4.1.0
Platforms ruby, x86_64-linux
Ruby 4.0.9p0 (2026-10-23 revision 3e93b23afcec3433f6aecc34b5d832799d754238) [x86_64-linux]
Full Path /opt/ruby-4.0.9/bin/ruby
Config Dir /opt/ruby-4.0.9/etc
RubyGems 4.1.0
Gem Home /opt/ruby-4.0.9/lib/ruby/gems/4.0.0
Gem Path /home/user/.local/share/gem/ruby/4.0.0:/opt/ruby-4.0.9/lib/ruby/gems/4.0.0
User Home /home/user
User Path /home/user/.local/share/gem/ruby/4.0.0
Bin Dir /opt/ruby-4.0.9/bin
Git 2.39.5
```
## Bundler Build Metadata
```
Timestamp 2026-11-16
Git SHA 9af9267
```
## Bundler settings
```
path
Set via BUNDLE_PATH: "/tmp/repro-yank-update/app/vendor/bundle"
```
## Gemfile
### Gemfile
```ruby
source "file:///tmp/repro-yank-update/repo"
gem "aa"
```
### Gemfile.lock
```
GEM
remote: file:///tmp/repro-yank-update/repo/
specs:
aa (2.0.0)
PLATFORMS
ruby
x86_64-linux
DEPENDENCIES
aa
CHECKSUMS
aa (2.0.0)
BUNDLED WITH
4.1.0
```
Credit: https://ucsbplse.github.io/
- 主要言語
- Ruby
- スター
- 4k
- フォーク
- 2k
- 平均マージ
- 1日 20時間
- マージ済み PR(30日)
- 75
環境構築
このプロジェクトの開発コンテナを、あなたの GitHub アカウントでブラウザ上に起動します。
- Dockerfile・Docker Compose ファイルなし
- プルリクエストのテンプレートあり
- コントリビューションガイドを読む
はじめの一歩
- issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
- 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
- リポジトリをフォークし、ブランチを切って変更します。
- issue 番号を参照したプルリクエストを送ります。
ruby/rubygems のほかの issue
-
難易度 2/5 1〜3時間 初心者へのやさしさ 72/100
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 78/100
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 78/100
メンテナーはふだん 1 日以内に返信
-
難易度 3/5 1〜2日 初心者へのやさしさ 65/100
メンテナーはふだん 1 日以内に返信
-
難易度 4/5 3〜5日 初心者へのやさしさ 56/100
メンテナーはふだん 1 日以内に返信
似ている issue
-
🐛 bug 👩💻 équipe CE 🧑🏭 entreprises
難易度 2/5 1〜3時間 初心者へのやさしさ 76/100
betagouv/conseillers-entreprises#4808 ·
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 78/100
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 76/100
yosiat/panko_serializer#250 ·
-
難易度 1/5 1時間未満 初心者へのやさしさ 75/100
cline/mcp-marketplace#3886 ·
-
難易度 2/5 1〜3時間 初心者へのやさしさ 78/100