[bug] Issues mounting extended disk in ppc64
メンテナーはふだん 4 日以内に返信
@deekay2310 がすでに取り組んでいます。
2026年9月14日 から。
評価
- 難易度
- 4/5
- 見積もり時間
- 3〜5日
- 初心者へのやさしさ
- 45/100
- issue の種類
- バグ
- 明瞭さ
- おおむね明確
- 活発さ
- 活発
- 技術スタック
- docker, gitlab, shell
調査の方向性
install-glrunner.sh から開始し、executor-containers.conf のジェネレーターと config.toml の [runners.docker] セクションを見つけます。リージョン固有の DNS 値がどのように選択されるかを確認し、その後、ppc64le runner 上でネストされた podman ジョブを同時に実行して、サブネット、DNS、ネットワークモード、MTU の変更を検証します。これらのジョブが DNS またはルーティングの失敗なしに完了すれば完了です。
索引モデルが issue の本文から書いたものです。
説明
mapt issue: ibm-power: fix podman networking for nested containers in GitLab runner builds
Background
The install-glrunner.sh script configures podman networking for the IBM Power (ppc64le)
GitLab runners. Several configuration bugs cause DNS failures inside build containers,
particularly in jobs that run nested podman run calls from within the gitlab-runner build
container (e.g. bootstrap_and_onboard.sh pattern).
Issues found
1. executor-containers.conf — wrong default_subnet causes routing conflict
File: whatever generates executor-containers.conf (mounted into build containers as
/etc/containers/containers.conf:ro)
The file currently sets:
[network]
default_subnet = "192.168.100.0/24"
With network_mode = "podman" in config.toml (see issue 3 below), all gitlab-runner build
containers are attached to the host's podman network at 192.168.100.0/24. When a build
container's job script runs a nested podman run, podman inside the build container reads
this containers.conf and tries to create a bridge at 192.168.100.1/24 inside the build
container's network namespace — the same subnet as the build container's own eth0.
This creates a conflicting route inside the build container, breaking all outbound traffic
from nested containers including DNS.
Fix: use a subnet that does not conflict with the host's podman network:
[network]
default_subnet = "172.20.0.0/24"
2. executor-containers.conf — no public DNS fallback
The file only lists IT-internal DNS resolvers:
dns_servers = ["10.130.98.132", "10.130.98.5", "10.130.98.69"]
dns_options = ["timeout:2", "attempts:5", "single-request"]
If the internal resolvers are temporarily unreachable (VPN/TGW hiccup), DNS fails
completely in nested containers with no fallback. attempts:5 also makes the worst-case
timeout 30 seconds before failure.
Fix:
dns_servers = ["10.130.98.132", "10.130.98.5", "10.130.98.69", "8.8.8.8"]
dns_options = ["timeout:2", "attempts:3", "single-request"]
3. config.toml — missing network_mode causes concurrent bridge race condition
With concurrent = 2, gitlab-runner creates two per-job bridge networks simultaneously.
The second bridge's nftables masquerade rules may not be applied before its containers
start sending traffic, causing intermittent DNS timeouts under concurrent load.
Fix: add to the [runners.docker] section:
network_mode = "podman"
This makes all job containers share the existing host podman network instead of creating
per-job bridges, eliminating the race condition entirely.
4. config.toml — missing explicit DNS for build containers
Without dns = in config.toml, gitlab-runner passes an empty DNS list via the Docker API,
which may override the host's containers.conf dns_servers setting for build containers.
Fix: add to [runners.docker]:
dns = ["10.130.98.132", "10.130.98.5", "10.130.98.69", "8.8.8.8"]
5. config.toml — missing MTU setting
PowerVS network interfaces have an MTU of 1450 (lower than the default 1500). Without
setting this, large packets (e.g. during image pulls) may be silently dropped.
Fix: add to [runners.docker]:
network_mtu = 1450
Required final configuration
executor-containers.conf
[containers]
log_driver = "journald"
pids_limit = -1
dns_servers = ["10.130.98.132", "10.130.98.5", "10.130.98.69", "8.8.8.8"]
dns_options = ["timeout:2", "attempts:3", "single-request"]
[network]
default_subnet = "172.20.0.0/24"
config.toml — [runners.docker] section
[runners.docker]
host = "unix:///run/podman/podman.sock"
privileged = true
network_mode = "podman"
network_mtu = 1450
dns = ["10.130.98.132", "10.130.98.5", "10.130.98.69", "8.8.8.8"]
volumes = ["/etc/containers/executor-containers.conf:/etc/containers/containers.conf:ro", "/cache"]
Notes
-
The IT DNS resolvers (
10.130.98.x) above are forus-south. Other regions use
different addresses — the install script should parameterise these per region:Region DNS resolvers us-east 10.130.64.4, 10.130.64.70, 10.130.64.134 us-south 10.130.98.5, 10.130.98.69, 10.130.98.132 eu-de 10.130.128.5, 10.130.128.69, 10.130.128.133 lon 10.130.129.4, 10.130.129.68, 10.130.129.132 -
The
172.20.0.0/24subnet forexecutor-containers.confmust not conflict with the
host's podman network (192.168.100.0/24), the PowerVS subnet, or the10.0.0.0/8
internal route. -
All fixes were validated on live
dal14ppc64le runners (aipcc-pro-gl-ppc64le-1..4).
Post-fix jobs ran successfully including nestedpodman runworkloads
(bootstrap-and-onboardjobs across all 4 runners, 2 confirmed successe
- 主要言語
- Go
- スター
- 25
- フォーク
- 41
- 平均マージ
- 5日 3時間
- マージ済み PR(30日)
- 16
環境構築
このプロジェクトには開発コンテナ、Dockerfile、コントリビューションガイドがありません。まず README を読み、一般的な手順ははじめてのコントリビューションガイドを参照してください。
はじめの一歩
- issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
- 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
- リポジトリをフォークし、ブランチを切って変更します。
- issue 番号を参照したプルリクエストを送ります。
redhat-developer/mapt のほかの issue
-
難易度 2/5 1〜3時間 初心者へのやさしさ 78/100
redhat-developer/mapt#972 ·
メンテナーはふだん 4 日以内に返信
-
Host/username secret values contain trailing newlines, sanitization fix breaks SSH key再び着手できるかも @abdulazeem-tk4vr が 153 日前に担当しましたが、オープン中のプルリクエストはありません。 オープン
難易度 2/5 1〜3時間 初心者へのやさしさ 72/100
redhat-developer/mapt#817 · コメント 12 件 ·
メンテナーはふだん 4 日以内に返信
-
openshift-snc: align cluster ingress domain with the nip.io access domain (crc.testing split-brain)オープン
難易度 5/5 1週間以上 初心者へのやさしさ 25/100
redhat-developer/mapt#968 · リアクション 1 件 ·
メンテナーはふだん 4 日以内に返信
-
[enhancement] github runner: support just-in-time (JIT) runner configuration対応中かも @atishay-kasliwal が 1 日前に担当しました。 オープン
難易度 4/5 3〜5日 初心者へのやさしさ 48/100
redhat-developer/mapt#957 · コメント 1 件 ·
メンテナーはふだん 4 日以内に返信
-
enhancement provider/IBMCLOUD
難易度 4/5 3〜5日 初心者へのやさしさ 25/100
redhat-developer/mapt#955 ·
メンテナーはふだん 4 日以内に返信
redhat-developer/mapt の issue をすべて見る
似ている issue
-
Add iterate GmbH domains to a dedicated list and include it in company and developer categoriesオープン
難易度 2/5 1〜3時間 初心者へのやさしさ 66/100
v2fly/domain-list-community#4307 ·
メンテナーはふだん 1 日以内に返信
-
notify: voice_queue rows are deleted only at startup, so a hub that stays up grows it without boundオープン
難易度 2/5 1〜3時間 初心者へのやさしさ 72/100
mattabate/life-distributable#232 ·
メンテナーはふだん 1 日以内に返信
-
難易度 1/5 1時間未満 初心者へのやさしさ 86/100
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 64/100
projectdiscovery/cdncheck#554 ·
メンテナーはふだん 1 日以内に返信
-
難易度 2/5 1〜3時間 初心者へのやさしさ 72/100
openbao/openbao-plugins#170 ·
メンテナーはふだん 1 日以内に返信