bcm2835-codec H.264 decode: last ~100 frames never dequeued at end of stream (Chromium V4L2, Pi 3B+, kernel 6.12)

オープン
  • 何か問題がありますか？
#7,618 コメント 0 件 リアクション 0 件 担当者 0 名 GitHub で見る

メンテナーはふだん 1 日以内に返信

まだ誰も着手していません。

評価

難易度
4/5
見積もり時間
3〜5日
初心者へのやさしさ
48/100
issue の種類
バグ
明瞭さ
おおむね明確
活発さ
活発
技術スタック
c, linux
領域
audio-video-rtc, operating-systems

調査の方向性

Reproduce the stall with the provided ffmpeg sample in Chromium on a Pi 3B+ with hardware decoding enabled, then inspect the bcm2835-codec V4L2 end-of-stream and buffer-dequeue handling around /dev/video10. Compare the behavior with the early V4L2_BUF_FLAG_LAST case described in #5059. Done means playback reaches the final frame and the video element emits ended without disabling hardware decoding.

索引モデルが issue の本文から書いたものです。

説明

What happens

A <video> element playing H.264 in Chromium stops advancing roughly 3.3 s before
the end of the file and never reaches the end. The element stays in a healthy
state: readyState 2, paused false, error null, the whole file buffered.
Because the ended event never fires, loop never restarts and any code waiting
on ended waits forever. The rest of the page keeps rendering normally.

Playback runs to the end and loops correctly when Chromium is started with
--disable-accelerated-video-decode.

Environment
  • Raspberry Pi 3 Model B Plus Rev 1.3
  • Raspberry Pi OS (Trixie), arm64, kernel 6.12
  • Chromium 152, kiosk under cage (Wayland), 1280x720
  • gpu_mem=128
  • Hardware decode confirmed in use: the GPU process holds /dev/video10 open
    (bcm2835-codec-decode), verified with
    ls -l /proc/$(pgrep -f -- --type=gpu-process)/fd | grep video
Where it stalls

Element state sampled every 2 s over the DevTools protocol.

source stalls at duration
original, H.264 High, B-frames, moov at end 16.76 s 20 s
same stream, moov moved to front 16.81 s 20 s
re-encoded without B-frames 16.77 s 20 s
keyframe every 2 s (last at 18.0 s) 16.75 s 20 s
40 s version of the same content 36.67 s 40 s
original, service worker bypassed 16.75 s 20 s
original, --disable-accelerated-video-decode plays to end, loops 20 s

Both stall points sit about 3.3 s before the end, and both sources are 30 fps.
That is roughly 100 frames in each case, which suggests a fixed queue rather than
a fixed amount of time: the last ~100 frames appear to stay in the decoder and are
never dequeued.

What has been ruled out
  • The file: ffmpeg decodes it without error or warning.
  • Container layout: moving moov to the front changes nothing.
  • Stream structure: no B-frames, and a keyframe every 2 s, change nothing.
  • Delivery: bypassing the service worker changes nothing.
  • Duration: the same behaviour at 20 s and 40 s, at the same offset from the end.
Possibly related

This looks like the same class of problem as #5059 (frames left un-dequeued after
CMD_STOP because V4L2_BUF_FLAG_LAST arrives early), but the trigger differs:
#5059 is about mid-stream caps renegotiation on a Pi 4 through GStreamer, while
this is at end of stream through Chromium's V4L2 decoder on a Pi 3. It is not
established that it is the same bug.

Why it matters here

This is a digital signage fleet. A video that never reaches its end never loops,
and a playlist that waits for ended stops advancing. The two workarounds
available to us both cost something: software decoding drops 34% of frames at
720p30 at 84% CPU and 73 °C with soft thermal limiting active, and working around
it in the player means dropping the last three seconds of every video.

Reproducing

Any H.264 file reproduces it. A self-contained sample:

ffmpeg -f lavfi -i testsrc2=size=1280x720:rate=30:duration=20 \
       -c:v libx264 -profile:v high -pix_fmt yuv420p -crf 23 -an sample.mp4

Load it in a <video loop> element in Chromium on a Pi 3B+ with hardware decode
active and watch currentTime and readyState. It stops advancing around
16.7 s and stays there.

主要言語
C
スター
13.3k
フォーク
5.5k
平均マージ
3日 20時間
マージ済み PR（30日）
27

環境構築

このプロジェクトには開発コンテナ、Dockerfile、コントリビューションガイドがありません。まず README を読み、一般的な手順ははじめてのコントリビューションガイドを参照してください。

はじめの一歩

  1. issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
  2. 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
  3. リポジトリをフォークし、ブランチを切って変更します。
  4. issue 番号を参照したプルリクエストを送ります。

raspberrypi/linux のほかの issue

raspberrypi/linux の issue をすべて見る

似ている issue

C の issue をもっと見る

新しい issue をメールで受け取る

初心者向けの GitHub issue を短くまとめたダイジェスト。